JET

  • Built-in rabbeting ledge adds versatility
  • Center fence controls are conveniently mounted to allow quick adjustments
  • Exclusive front-mounted table adjustment handwheels make quick, easy, and accurate corrections
  • Extra-long heavy-duty cast iron infeed and outfeed tables with precision machined finish
  • Heavy-duty cast iron infeed and outfeed tables with precision machined finish
MSRP: $2,000.12
$1,627
As low as $52.87/mo
  • Front mounted toggle switch with removable safety key
  • Highly visible scale for accurate depth of cut adjustments
  • Includes 4 mounting brackets that secure jointer to benchtop
  • Internal blower motor moves dust and chips away from motor and cutter head
  • Large dust collection bag with quick empty zipper
MSRP: $1,567.60
$1,345
As low as $43.71/mo
  • Built-in 4" dust chute connects to your collection system for efficient dust/chip disposal
  • Built-in rabbeting ledge adds versatility
  • Fence adjustment levers are conveniently located in the center of the fence for quick access
  • Heavy-duty, one-piece steel closed stand includes mounting tabs for increased stability
  • Magnetic controls provide long life and reliability, protecting the motor from potential electrical supply issues
MSRP: $3,013.66
$2,455
As low as $79.78/mo
  • Built-in dust chute with 4" port connects to your collection system for efficient dust/chip disposal
  • Center fence controls are conveniently mounted to allow quick adjustments
  • Exclusive front-mounted table adjustment handwheels make quick, easy, and accurate corrections
  • Extra-long heavy-duty cast iron infeed and outfeed tables with precision machined finish
  • Heavy-duty cast iron infeed and outfeed tables with precision machined finish
MSRP: $2,702.80
$2,199
As low as $71.46/mo
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $2,113.09
$1,278
As low as $41.53/mo
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $1,665.39
$1,045
As low as $33.96/mo
  • Cutterhead diameter: 2-15/16”
  • Cutterhead speed: 5,500 rpm 
  • Cutting capacity width: 8”
  • Fence size: 40½” x 5”
MSRP: $3,783.99
$2,999
As low as $97.46/mo
  • Complies with ANSI/ASME B30.1 standards
  • Convenient swivel socket for multi-directional use
  • Dual purpose jack designed for low or high clearances increases versatility
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Heat treated piston resists corrosion
MSRP: $1,544.39
$973
As low as $31.62/mo
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,510.29
$985
As low as $32.01/mo
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Labor saving air pump that connects to a pneumatic source for increased lifting speed
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use
MSRP: $856.89
$575
As low as $18.68/mo
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $7,973.89
$4,599
As low as $149.46/mo
  • Complies with ANSI/ASME B30.1 standards
  • Corrugated Pivoting Head
  • Corrugated pivoting head, contours to the load providing maximum surface contact
  • Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
  • Improved design requires less effort to lift a maximum capacity load
MSRP: $578.59
$425
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $402.59
$280
  • Cuts and bends up to 5/8 inch, grade 60 rebar for a variety of applications
  • Easier cutting with the needle bearing design reduces operator fatigue
  • High strength steel jaws permit the cutting of material up to a 48 Rockwell Hardness for industrial applications
  • Mountable on a board or floor allows for one-handed operation
  • Backed by our industry leading 1-Year Warranty
MSRP: $1,147.29
$743
As low as $24.14/mo
  • Complies with ANSI/ASME B30.1 standards
  • Dual purpose jack designed for low or high clearances increases versatility
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Heat treated piston resists corrosion
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use
MSRP: $582.99
$418
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,070.29
$676.50
As low as $21.98/mo
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $637.99
$473
  • Complies with ANSI/ASME B30.1 standards
  • Corrugated Pivoting Head
  • Corrugated pivoting head, contours to the load providing maximum surface contact
  • Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
  • Improved design requires less effort to lift a maximum capacity load
MSRP: $445.49
$296
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $492.79
$313.50
  • Complies with ANSI/ASME B30.1 standards
  • Dual purpose jack designed for low or high clearances increases versatility
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Heat treated piston resists corrosion
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use
MSRP: $991.09
$655
As low as $21.28/mo
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $287.09
$215
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $10,403.79
$5,855
As low as $190.28/mo
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $655.59
$456
  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $425.69
$268

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.