JET

  • Layout
Jet BDB-919 Belt Drive Bench lathe 321378 at Elite Metal Tools
Jet BDB-919 Belt Drive Bench lathe 321378
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Power longitudinal feed allows threading and reverse threading
  • Quick change gearbox provides wide range of inch and metric threads
MSRP: $4,125.71
$3,469
As low as $112.74/mo
View Details
Jet 45 Ton Ironworker | JIW-45T 756100 at Elite Metal Tools
Jet 45 Ton Ironworker | JIW-45T 756100
  • Four Workstations: Punch, Flat Bar Shear, Angle Shear & Rod Shear
  • Operates on 115V power allowing use almost anywhere
  • ANSI Compliant Guarding on the Angle & Rod Shears
  • E-stop with UL Listed compliant controls providing additional operator safety
  • Includes a Punch & Die Storage Tray able to hold up to 10 Punch & Die Sets
MSRP: $11,048.30
$6,699
As low as $217.71/mo
View Details
Jet BDB-929 Belt Drive Bench lathe 321379 at Elite Metal Tools
Jet BDB-929 Belt Drive Bench lathe 321379
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Power longitudinal feed allows threading and reverse threading
  • Quick change gearbox provides wide range of inch and metric threads
MSRP: $4,541.43
$3,799
As low as $123.46/mo
View Details
Jet JMD-18 Mill/Drill With R-8 Taper 115V1Ph 350018 at Elite Metal Tools
Jet JMD-18 Mill/Drill With R-8 Taper 115V1Ph 350018
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $4,074.29
$3,339
As low as $108.51/mo
View Details
Jet HBS-1018W, 10" x 18" Horizontal Bandsaw 414473 at Elite Metal Tools
Jet HBS-1018W, 10" x 18" Horizontal Bandsaw 414473
  • Adjustable Material Stop
  • Blade guides feature parallel double-row ball bearing support
  • Built-in, self-propelled blade brush extends blade life
  • Carbide blade guides feature parallel double-row ball bearing support
  • Coolant is distributed through the blade guides
MSRP: $7,247.14
$5,899
As low as $191.71/mo
View Details
Jet HBS-1018EVS, 10" x 18" EVS (Electronic Variable Speed) Horizontal Bandsaw 424470 at Elite Metal Tools
Jet HBS-1018EVS, 10" x 18" EVS (Electronic Variable Speed) Horizontal Bandsaw 424470
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Carbide blade guides feature parallel double-row ball bearing support
  • Coolant is distributed through the blade guides
  • Electronically controlled blade speed from 82 - 330 SFPM
MSRP: $7,936.50
$7,099
As low as $230.71/mo
View Details
Jet GHB-1340A, Gear Head Bench Lathe 321357A at Elite Metal Tools
Jet GHB-1340A, Gear Head Bench Lathe 321357A
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
  • Gearbox gives wide inch threading and feed capabiltites with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
MSRP: $11,424.29
$9,299
As low as $302.21/mo
View Details
Jet VBS-18MWEVS 18 Metal/Wood EVS Bandsaw 2HP, 230V, Single Phase 414428 at Elite Metal Tools
Jet VBS-18MWEVS 18 Metal/Wood EVS Bandsaw 2HP, 230V, Single Phase 414428
  • Rack and pinion adjustment on upper blade guide support
  • Cast iron trunnion
  • CSA/US: Following strict guidelines and electrical requirements, this JET Bandsaw is CSA/US certified
  • Fully balanced, cast-iron wheels with rubber tires
  • Fully guarded blade
MSRP: $6,007.14
$4,919
As low as $159.86/mo
View Details
Jet BDB-919 Belt Drive Bench lathe with stand 321370K at Elite Metal Tools
Jet BDB-919 Belt Drive Bench lathe with stand 321370K
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Induction hardened and ground bedway
  • Power longitudinal feed allows threading and reverse threading
MSRP: $4,640
$3,899
As low as $126.71/mo
View Details
Jet JMD-15 Mill/Drill With R-8 Taper 115V1Ph 350017 at Elite Metal Tools
Jet JMD-15 Mill/Drill With R-8 Taper 115V1Ph 350017
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read external depth gauge
MSRP: $3,192.86
$2,599
As low as $84.46/mo
View Details
Jet HVBS-712, 7" x 12" Horizontal / Vertical Bandsaw 414559 at Elite Metal Tools
Jet HVBS-712, 7" x 12" Horizontal / Vertical Bandsaw 414559
  • 9" x 12" worktable in the vertical position
  • Adjustable Material Stop
  • Adjustable material stop for repeatability
  • Blade drive is a belt to sealed, hardened, and ground gear drive system
  • Blade wheels are made from flanged cast iron
MSRP: $2,366.64
$1,949
As low as $63.34/mo
View Details
Jet MBS-1323EVS-H-4, Semi-Automatic Dual Mitering Bandsaw 3HP 460V3HP 460V, 3-Ph 413415 at Elite Metal Tools
Jet MBS-1323EVS-H-4, Semi-Automatic Dual Mitering Bandsaw 3HP 460V3HP 460V, 3-Ph 413415
  • Adjustable Material Stop
  • Blade tension gauge helps to ensure the blade is in the correct cutting position
  • Built-in, self-propelled blade brush prevents chip build up in blade guides
  • Heavy Duty construction
  • Hydraulic downfeed control is easily adjusted enabling feed rates to evolve with variable types of materials
MSRP: $24,404.29
$19,899
As low as $393.80/mo
View Details
Jet IBG-8VS 8" Variable Speed Industrial Grinder 578208 at Elite Metal Tools
Jet IBG-8VS 8" Variable Speed Industrial Grinder 578208
  • Adjustable Cast Iron Tool Rest
  • Brake Resistor added for rapid wheel stoppage
  • Cast iron guards house the 36- and 60-grit wheels
  • CSA/CUS Certified
  • Large Eye Safety Shields
MSRP: $831.43
$748
As low as $24.31/mo
View Details
Jet IBG-8VSB 8" Variable Speed Industrial Buffer 578218 at Elite Metal Tools
Jet IBG-8VSB 8" Variable Speed Industrial Buffer 578218
  • Brake Resistor added for rapid wheel stoppage
  • CSA/CUS Certified
  • Totally enclosed, pre-lubricated ball bearings
  • Variable speed provides wide range of RPMs
  • *LED Work Lamp shown not included
MSRP: $652.86
$589
As low as $19.14/mo
View Details
Jet BDB-929 Belt Drive Bench lathe with stand 321372K at Elite Metal Tools
Jet BDB-929 Belt Drive Bench lathe with stand 321372K
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Induction hardened and ground bedway
  • Power longitudinal feed allows threading and reverse threading
MSRP: $5,070
$4,269
As low as $138.74/mo
View Details
Jet IAFS-3000 3000 CFM Industrial Air Filtration System 1HP, 230V, Single Phase 415150 at Elite Metal Tools
Jet IAFS-3000 3000 CFM Industrial Air Filtration System 1HP, 230V, Single Phase 415150
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Metalworking-specific outer filter that attracts more oil mist, smoke and dust generated during the metal processing, which could effect the health of the machinist, especially in closed areas of the workshop
MSRP: $2,920
$2,429
As low as $78.94/mo
View Details
Jet HVBS-8-DMW 8” Horizontal/Vertical Dual Mitering Portable Band Saw , 1HP, 115V, 1 Ph 424460 at Elite Metal Tools
Jet HVBS-8-DMW 8” Horizontal/Vertical Dual Mitering Portable Band Saw , 1HP, 115V, 1 Ph 424460
  • Adjustable vise
  • Automatic shut off switch stops the sawing process
  • Blade is fully guarded for Operator safety
  • Built-in, self-propelled blade brush prevents chip build up in blade guides
  • Head is pressure controlled by a hydraulic cylinder
MSRP: $4,571.43
$3,699
As low as $120.21/mo
View Details
Jet E-1440VS, Elite 14x40 EVS Lathe 892030 at Elite Metal Tools
Jet E-1440VS, Elite 14x40 EVS Lathe 892030
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $24,775.71
$20,239
As low as $400.52/mo
View Details
Jet HVBS-710G, 7" x 10-1/2" Horizontal/Vertical Mitering Geared Head Bandsaw 413452 at Elite Metal Tools
Jet HVBS-710G, 7" x 10-1/2" Horizontal/Vertical Mitering Geared Head Bandsaw 413452
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Fully adjustable hydraulic downfeed system
  • Hardened and ground drive shaft and worm gears transmit maximum torque to blade wheels
  • Heavy-duty cast iron saw bow and bed
MSRP: $3,868.57
$3,149
As low as $102.34/mo
View Details
Jet EGH-1740, Elite 17x40 Large Spindle Bore Geared Head Lathe 892100 at Elite Metal Tools
Jet EGH-1740, Elite 17x40 Large Spindle Bore Geared Head Lathe 892100
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $43,598.57
$35,789
As low as $708.26/mo
View Details
Jet HBS-916, 9" x 16" Horizontal Bandsaw 414468 at Elite Metal Tools
Jet HBS-916, 9" x 16" Horizontal Bandsaw 414468
  • Adjustable Material Stop
  • Blade guides feature parallel double-row ball bearing support
  • Built-in, self-propelled blade brush extends blade life
  • Carbide blade guides feature parallel double-row ball bearing support
  • Coolant is distributed through the blade guides
MSRP: $6,345.10
$5,179
As low as $168.31/mo
View Details
Jet JTM-4VS-1 Variable Speed Vertical Milling Machine 115/230V 1Ph 690180 at Elite Metal Tools
Jet JTM-4VS-1 Variable Speed Vertical Milling Machine 115/230V 1Ph 690180
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $15,164.29
$12,299
As low as $399.71/mo
View Details
Jet HVBS-712D, 7" x 12" Deluxe Horizontal / Vertical Bandsaw 414560 at Elite Metal Tools
Jet HVBS-712D, 7" x 12" Deluxe Horizontal / Vertical Bandsaw 414560
  • Blade drive is a belt to sealed, hardened, and ground gear drive system
  • Blade wheels are made from flanged cast iron for increased durability
  • Cast mounted adjustable hydraulic downfeed
  • CSA/CUS Certified
  • Four 8" Rubber Wheels for Ease of Movement
MSRP: $2,525.71
$2,059
As low as $66.91/mo
View Details
Jet JMD-40GH Geared Head Mill/Drill 351040 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill 351040
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $6,041.43
$4,969
As low as $161.49/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.