JET

  • Layout
Jet GHB-1340A With Newall DP700 DRO With Collet Closer 321581 at Elite Metal Tools
Jet GHB-1340A With Newall DP700 DRO With Collet Closer 321581
  • 6” 3 jaw direct mount chuck with top reversing jaws
  • Compound and cross slide have backlash elimination
  • Gear box gives wide inch threading and feed capabilities with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $17,431.43
$14,279
As low as $464.06/mo
View Details
Jet JTM-4VS Mill With Acu-Rite 203 DRO With X, Y & Z-Axis Powerfeeds With Air Powered Draw Bar 690231 at Elite Metal Tools
Jet JTM-4VS Mill With Acu-Rite 203 DRO With X, Y & Z-Axis Powerfeeds With Air Powered Draw Bar 690231
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,553.52
$21,418.99
As low as $423.88/mo
View Details
Jet Spider for 2" Spindle Bore 650226 at Elite Metal Tools
Jet Spider for 2" Spindle Bore 650226
  • Gun-smithing spider adds functionality to the JET GH-1440B lathe
$165
View Details
Jet JTM-2 Mill With Newall DP500 DRO 692193 at Elite Metal Tools
Jet JTM-2 Mill With Newall DP500 DRO 692193
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $16,580
$13,479
As low as $438.06/mo
View Details
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds 894305 at Elite Metal Tools
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds 894305
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $32,432.86
$26,399
As low as $522.43/mo
View Details
Jet GH-1440B with Acu-Rite 203 DRO 323440 at Elite Metal Tools
Jet GH-1440B with Acu-Rite 203 DRO 323440
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $21,042.99
$17,119
As low as $338.78/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO 894365 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO 894365
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,263.43
$27,889
As low as $551.92/mo
View Details
Jet E-1236VS With Newall DP700 DRO 892319 at Elite Metal Tools
Jet E-1236VS With Newall DP700 DRO 892319
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $21,870
$17,659
As low as $349.47/mo
View Details
Jet JET — CCS-1 Mill Chuck and Collet Set 466001 at Elite Metal Tools
Jet JET — CCS-1 Mill Chuck and Collet Set 466001
  • Includes 15 precious spring collets in 1/16" increments from 1/8" to 1"
  • T.I.R. at 2-3/8" is 0.0008"
  • Shank taper R-8
  • Spring collets replace 15 individual adapters
  • With wooden case and spanner wrenches
MSRP: $751.43
$699
As low as $22.71/mo
View Details
Jet ETM-949 Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894040 at Elite Metal Tools
Jet ETM-949 Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894040
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $64,449.43
$52,459
As low as $1,038.16/mo
View Details
Jet EVS-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894304 at Elite Metal Tools
Jet EVS-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894304
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,030
$27,699
As low as $548.16/mo
View Details
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP500 2-Axis DRO & X-Axis Powerfeed 351161 at Elite Metal Tools
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP500 2-Axis DRO & X-Axis Powerfeed 351161
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $13,799.31
$11,239
As low as $365.26/mo
View Details
Jet JET — 13GH/BD Taper Attachment for 13 x 40 A Lathes 321442 at Elite Metal Tools
Jet JET — 13GH/BD Taper Attachment for 13 x 40 A Lathes 321442
  • 10° Inclusive cutting capacity
  • Mounts to predrilled and tapped holes
MSRP: $3,668.57
$3,029
As low as $98.44/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and Servo X-Axis Powerfeed 894405 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and Servo X-Axis Powerfeed 894405
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,723.14
$31,519
As low as $623.76/mo
View Details
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds 894307 at Elite Metal Tools
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds 894307
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,177.43
$27,819
As low as $550.53/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed 894352 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed 894352
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,951.43
$28,449
As low as $563.00/mo
View Details
Jet JTM-1254RVS with 3-Axis ACU-RITE G-2 MILLPOWER CNC 691944 at Elite Metal Tools
Jet JTM-1254RVS with 3-Axis ACU-RITE G-2 MILLPOWER CNC 691944
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • 3-D Contouring, ability to import and run G-code files from CAD/CAM programs
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Available offline software
MSRP: $59,953.06
$48,799
As low as $965.73/mo
View Details
Jet JTM-1050 MILL W/DP700, X&Z POWERFEEDS 692206 at Elite Metal Tools
Jet JTM-1050 MILL W/DP700, X&Z POWERFEEDS 692206
MSRP: $28,304.29
$22,799
As low as $451.19/mo
View Details
Jet JET — 5 Gallon MW Biodegradable Coolant (Pail) 414127 at Elite Metal Tools
Jet JET — 5 Gallon MW Biodegradable Coolant (Pail) 414127
  • Environmentally friendly
  • Excellent coolant and heat transfer
  • Non-flammable
  • Superior fluid stability
  • Longer tool life
MSRP: $248.14
$226
View Details
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351159 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351159
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $12,957.75
$10,539
As low as $342.51/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690408 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690408
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,258.97
$17,999
As low as $356.20/mo
View Details
Jet GH-1440B with Taper Attachment 323442 at Elite Metal Tools
Jet GH-1440B with Taper Attachment 323442
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $19,162.99
$15,599
As low as $308.70/mo
View Details
Jet JET — Taper Attachment for W Series and GH1440 321520 at Elite Metal Tools
Jet JET — Taper Attachment for W Series and GH1440 321520
  • 10° Inclusive cutting capacity
  • Mounts to predrilled and tapped holes
  • Specially designed for each model
MSRP: $4,285.71
$3,569
As low as $115.99/mo
View Details
Jet GH-1440-3 Lathe with Taper Attachment and Collet Closer 323402 at Elite Metal Tools
Jet GH-1440-3 Lathe with Taper Attachment and Collet Closer 323402
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $29,524.99
$23,899
As low as $472.96/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.