JET

  • Layout
Jet JLH-50-15, 1/2-Ton Compact Lever Hoist With 15' Lift 181515 at Elite Metal Tools
Jet JLH-50-15, 1/2-Ton Compact Lever Hoist With 15' Lift 181515
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $585.19
$419
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 15' Lift | JSH-550-15 110515 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 15' Lift | JSH-550-15 110515
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $4,077.69
$2,371
As low as $77.05/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 691191 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 691191
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $23,785.07
$18,999
As low as $375.99/mo
View Details
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X-Axis Powerfeed 690634 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X-Axis Powerfeed 690634
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,434.26
$26,173
As low as $517.96/mo
View Details
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X, Y and Z-Axis Powerfeeds 690638 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X, Y and Z-Axis Powerfeeds 690638
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $36,218.26
$28,953
As low as $572.97/mo
View Details
Jet JLP-300A-5, 3 Ton Lever Hoist with 5' Lift 287500 at Elite Metal Tools
Jet JLP-300A-5, 3 Ton Lever Hoist with 5' Lift 287500
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $868.99
$575
As low as $18.68/mo
View Details
Jet JLP-150A-5SH, 1-1/2 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287700 at Elite Metal Tools
Jet JLP-150A-5SH, 1-1/2 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287700
  • All steel construction
  • Impact resistant all steel construction for added durability and protection
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
MSRP: $636.89
$475
View Details
Jet JLP-025A-15,1/4 Ton Mini-Puller, 15' Lift 287102 at Elite Metal Tools
Jet JLP-025A-15,1/4 Ton Mini-Puller, 15' Lift 287102
  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $389.39
$265
View Details
Jet JLH-600WO-10 6 Ton Lever Hoist, 10' Lift with Overload Protection 376601 at Elite Metal Tools
Jet JLH-600WO-10 6 Ton Lever Hoist, 10' Lift with Overload Protection 376601
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $2,467.29
$1,495
As low as $48.58/mo
View Details
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 230V 140183 at Elite Metal Tools
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 230V 140183
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
  • TAA approved
MSRP: $3,930.29
$2,294
As low as $74.55/mo
View Details
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X-Axis Powerfeed and Air Powered Drawbar 690620 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X-Axis Powerfeed and Air Powered Drawbar 690620
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,596.53
$27,762
As low as $549.40/mo
View Details
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X, Y and Z-Axis Powerfeeds 690450 at Elite Metal Tools
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X, Y and Z-Axis Powerfeeds 690450
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $32,839.72
$26,471
As low as $523.86/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X & Y Powerfeeds & Air Power Drawbar 698135 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X & Y Powerfeeds & Air Power Drawbar 698135
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $39,191.45
$31,138
As low as $616.22/mo
View Details
Jet JLH Series 3/4 Ton Lever Hoist, 20' Lift with Overload Protection 376103 at Elite Metal Tools
Jet JLH Series 3/4 Ton Lever Hoist, 20' Lift with Overload Protection 376103
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $868.99
$588
As low as $19.11/mo
View Details
Jet JLH-25-10, 1/4-Ton Compact Lever Hoist With 10' Lift 181210 at Elite Metal Tools
Jet JLH-25-10, 1/4-Ton Compact Lever Hoist With 10' Lift 181210
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $487.29
$315
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698054 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698054
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,272.53
$31,932
As low as $631.93/mo
View Details
Jet JLP-075A-10, 3/4 Ton Lever Hoist, 10' Lift 287301 at Elite Metal Tools
Jet JLP-075A-10, 3/4 Ton Lever Hoist, 10' Lift 287301
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $543.39
$398
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS050-460-015 144002 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS050-460-015 144002
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $7,922.19
$4,553
As low as $147.97/mo
View Details
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed 690072 at Elite Metal Tools
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed 690072
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,433.72
$17,504
As low as $346.40/mo
View Details
Jet 1-1/2-Ton Hand Chain Hoist with 30' Lift | S90-150-30 101923 at Elite Metal Tools
Jet 1-1/2-Ton Hand Chain Hoist with 30' Lift | S90-150-30 101923
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $893.19
$599
As low as $19.46/mo
View Details
Jet JTM-1254RVS with X Powerfeed & Air Power Drawbar 698085 at Elite Metal Tools
Jet JTM-1254RVS with X Powerfeed & Air Power Drawbar 698085
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $29,907.12
$23,498
As low as $465.02/mo
View Details
Jet JTM-1254VS with NEWALL DP700 DRO X Powerfeed & Air Power Drawbar 698068 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 DRO X Powerfeed & Air Power Drawbar 698068
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,623.72
$29,251
As low as $578.87/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS300-230-010 140116 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS300-230-010 140116
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $15,343.89
$8,640
As low as $280.80/mo
View Details
Jet JLP-075A-20, 3/4 Ton Lever Hoist with 20' Lift 287303 at Elite Metal Tools
Jet JLP-075A-20, 3/4 Ton Lever Hoist with 20' Lift 287303
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
MSRP: $602.79
$429
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.