JET

  • Layout
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $8,611.20
$6,949
As low as $225.84/mo
View Details
Jet 7" x 12" Variable Speed Horizontal / Vertical Bandsaw Deluxe | HVBS712D 415560 at Elite Metal Tools
Jet 7" x 12" Variable Speed Horizontal / Vertical Bandsaw Deluxe | HVBS712D 415560
  • Adjustable toolless material stop
  • Four 8" Rubber Wheels for Ease of Movement
  • Heavy Casted Iron Bow and Bed
  • Hydraulic downfeed for ease of cut
  • Improved Wider Stand with Built-in Storage Cabinet and Chip Tray
MSRP: $2,900.93
$2,389
As low as $77.64/mo
View Details
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520 at Elite Metal Tools
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in a 30 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $2,579.99
$2,099.99
As low as $68.24/mo
View Details
Jet JPM-13CS, 13" Closed Stand Planer / Molder, 1-1/2HP, 1Ph, 115/230V 708524 at Elite Metal Tools
Jet JPM-13CS, 13" Closed Stand Planer / Molder, 1-1/2HP, 1Ph, 115/230V 708524
  • Exclusive angled 4" dust port keeps the dust hose out of the way while providing efficient chip and dust removal
  • Four precision-ground column design feature adds stability when raising and lowering the table
  • Infeed and outfeed rollers are adjustable and rubber-coated to support your workpiece without marring the wood
  • Molding cutter head accommodates over 40 standard molding cutter sets; most 2" or smaller heads can be installed without removing the planning knives to save you set-up time
  • Top-mounted height adjustment handle is easy to use for quick table height changes
MSRP: $2,088.56
$1,699.99
As low as $55.24/mo
View Details
Jet JDP-20EVST-460, 1-1/2" Drilling Capacity, 2HP, 460V, 3Ph with Forward and Reverse Tapping capability 354226 at Elite Metal Tools
Jet JDP-20EVST-460, 1-1/2" Drilling Capacity, 2HP, 460V, 3Ph with Forward and Reverse Tapping capability 354226
  • CSA Coolant System
  • Front Mounted LED Spindle RPM Readout
  • Front mounted positive control depth stop
  • Heavy-duty steel column for increased precision and rigidity
  • High torque at all speeds both forward and reverse
MSRP: $8,071.43
$6,549
As low as $212.84/mo
View Details
Jet JCDC-1.5 Cyclone Dust Collector, 1.5HP, 115V 717515 at Elite Metal Tools
Jet JCDC-1.5 Cyclone Dust Collector, 1.5HP, 115V 717515
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in 20 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $1,965.70
$1,599.99
As low as $51.99/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Air Powered Draw Bar 690680 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Air Powered Draw Bar 690680
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,425.67
$27,799
As low as $550.14/mo
View Details
Jet JWBS-15-3, 15" Bandsaw, 3HP, 230V 714650 at Elite Metal Tools
Jet JWBS-15-3, 15" Bandsaw, 3HP, 230V 714650
  • Blade tracking window provides clear view of blade during tracking
  • Cast iron handwheels and ergonomic-designed knobs make adjustments smooth and easy
  • Cast iron trunnion for maximum support and stability
  • Conveniently located dual 4" dust collection ports catch dust and chips at the source
  • Easy-to-read blade tension scale can be viewed through upper door window
MSRP: $3,132.84
$2,549.99
As low as $82.87/mo
View Details
Jet Geared Head Drill Press with Power Downfeed, 2HP, 3Ph, 230V | JDP20EVST-230-PDF 354245 at Elite Metal Tools
Jet Geared Head Drill Press with Power Downfeed, 2HP, 3Ph, 230V | JDP20EVST-230-PDF 354245
  • CSA Coolant System
  • Front Mounted LED Spindle RPM Readout
  • Front mounted positive control depth stop
  • Heavy-duty steel column for increased precision and rigidity
  • High torque at all speeds both forward and reverse
MSRP: $9,745.71
$7,859
As low as $255.41/mo
View Details
Jet J-8201VS, 14" Metal/Wood Vertical Variable Speed Bandsaw 414502 at Elite Metal Tools
Jet J-8201VS, 14" Metal/Wood Vertical Variable Speed Bandsaw 414502
  • 14 TPI metal cutting blade included
  • 6 TPI wood cutting blade included
  • Adjustable table
  • Conveniently located on/off switch
  • Gear box design allows wood/metal model saws to be used for a wider variety of metal, wood, non-ferrous metal and plastic cutting applications
MSRP: $3,414.29
$2,799
As low as $90.96/mo
View Details
Jet JTM-4VS Mill With X-Axis Powerfeed 690183 at Elite Metal Tools
Jet JTM-4VS Mill With X-Axis Powerfeed 690183
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $17,717.05
$14,355.99
As low as $466.56/mo
View Details
Jet HVBS-56 5" x 6" Horizontal/Vertical Bandsaw 414458 at Elite Metal Tools
Jet HVBS-56 5" x 6" Horizontal/Vertical Bandsaw 414458
  • Adjustable Material Stop
  • Ball bearing supported blade wheel
  • Fully adjustable ball bearing blade guides
  • Handle and wheels for easy movement
  • Heavy-Duty 14-gauge steel stand with shelf has been redesigned for stability, rigidity and ease of use.
MSRP: $971.43
$845
As low as $27.46/mo
View Details
Jet VBS-3612, 36" Vertical Bandsaw 414470 at Elite Metal Tools
Jet VBS-3612, 36" Vertical Bandsaw 414470
  • 1/4" x 14/18VT Bi-metal blade
  • Bi-Metal blade welder, grinder, and cutter
  • Blade and tire cleaning brush
  • Blade welder, grinder, and cutter
  • Easy to read blade tension indicator
MSRP: $20,461.43
$16,629
As low as $329.08/mo
View Details
Jet 8" x 12" Horizontal/Vertical Geared Head Bandsaw | HBS-812G 413460 at Elite Metal Tools
Jet 8" x 12" Horizontal/Vertical Geared Head Bandsaw | HBS-812G 413460
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Hardened and ground worm gear
  • Heavy-duty cast iron saw bow and head
  • Heavy-duty geared head transmission for quick speed changes
MSRP: $3,270
$2,649
As low as $86.09/mo
View Details
Jet The JPS-10 1.75 HP 115V 52" Proshop Tablesaw with Cast wings 725001K at Elite Metal Tools
Jet The JPS-10 1.75 HP 115V 52" Proshop Tablesaw with Cast wings 725001K
  • Convenient, magnetic paddle switch for the safest operation possible
  • CSA Certified
  • Improved dust shroud around blade for greater dust collection
  • Innovative single belt design for easier belt tensioning and reduced vibration
  • Low profile riving knife included
MSRP: $2,702.84
$2,199.99
As low as $71.49/mo
View Details
Jet HVBS-10-DMWC 10” Horizontal/Vertical Dual Mitering Portable Band Saw with Coolant System, 1HP, 115V, 1 Ph 424465 at Elite Metal Tools
Jet HVBS-10-DMWC 10” Horizontal/Vertical Dual Mitering Portable Band Saw with Coolant System, 1HP, 115V, 1 Ph 424465
  • Adjustable vise
  • Automatic shut off switch stops the sawing process
  • Blade is fully guarded for Operator safety
  • Built-in, self-propelled blade brush prevents chip build up in blade guides
  • Head is pressure controlled by a hydraulic cylinder
MSRP: $5,928.57
$4,799
As low as $155.96/mo
View Details
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190 at Elite Metal Tools
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,723
$2,701.99
As low as $87.81/mo
View Details
Jet "The JPS-10 1.75 HP 115V 30"" Proshop Tablesaw Cast wings" 725000K at Elite Metal Tools
Jet "The JPS-10 1.75 HP 115V 30"" Proshop Tablesaw Cast wings" 725000K
  • Convenient, magnetic paddle switch for the safest operation possible
  • CSA Certified
  • Improved dust shroud around blade for greater dust collection
  • Innovative single belt design for easier belt tensioning and reduced vibration
  • Low profile riving knife included
MSRP: $2,457.13
$1,999.99
As low as $64.99/mo
View Details
Jet JWS-35X5-1 Industrial Shaper 5HP, 1Ph 708326 at Elite Metal Tools
Jet JWS-35X5-1 Industrial Shaper 5HP, 1Ph 708326
  • 4" Dust port built into fence for convenient hookup to any dust collection system
  • Extra-large chrome handwheel is conveniently located for fast, easy, and accurate spindle height adjustments
  • Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs
  • Four RPM speeds (4000, 6000, 8000, 10000) let you select the best speed and torque for different cutter diameters
  • Large 26-3/4” x 32-1/4” precision-ground cast iron table provides a durable work area and is predrilled for power feeder
MSRP: $4,545.70
$3,699.99
As low as $120.24/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $57,907.14
$47,269
As low as $935.45/mo
View Details
Jet E-1236VS, Elite 12x36 EVS Lathe 892000 at Elite Metal Tools
Jet E-1236VS, Elite 12x36 EVS Lathe 892000
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $19,522.86
$15,899
As low as $314.64/mo
View Details
Jet JMD-18 Mill/Drill With X-Axis Table Powerfeed 350119 at Elite Metal Tools
Jet JMD-18 Mill/Drill With X-Axis Table Powerfeed 350119
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $5,992.03
$4,959
As low as $161.16/mo
View Details
Jet Deluxe Xacta® SAW 3HP, 1Ph, 30" Rip 708674PK at Elite Metal Tools
Jet Deluxe Xacta® SAW 3HP, 1Ph, 30" Rip 708674PK
  • Deluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate miters
  • Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
  • Hinged motor cover on cabinet gives quick access to the motor and belts
  • Independent leaf safety guard protects operator from blade while cutting, even at 45° tilt
  • Left and right cast iron extension wings
MSRP: $4,177.13
$3,399.99
As low as $110.49/mo
View Details
Jet JOSS-S, Floor Model Oscillating Spindle Sander, 1HP, 1Ph, 115V 723950 at Elite Metal Tools
Jet JOSS-S, Floor Model Oscillating Spindle Sander, 1HP, 1Ph, 115V 723950
  • 1-1/2" Oscillating action reduces friction heat to protect wood and prolong sleeve life
  • Baffles create a chamber under the table for improved dust collection
  • Includes 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1-1/2", 2", 3" and 4" spindle assemblies
  • Integrated paddle switch with safety key
  • Main spindle support runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for consistent performance
MSRP: $2,579.99
$2,099.99
As low as $68.24/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.