JET

  • Layout
Jet JET — Outfeed Roller Table for ECB-1422V 891163 at Elite Metal Tools
Jet JET — Outfeed Roller Table for ECB-1422V 891163
  • 4 Rollers
  • 40" x 25.2" Roller Capacity (L x W)
  • 27-1/2" - 30-1/8" Roller to Floor Height
  • 3306 lbs. Capacity Load
  • Steel
MSRP: $3,157.39
$2,520
As low as $81.90/mo
View Details
Jet JAT-920 Riveter 505921 at Elite Metal Tools
Jet JAT-920 Riveter 505921
  • 3/16" mild steel capacity
  • Heavy-duty construction for continuous production
  • Includes 3/16", 5/32", 1/8" and 3/32" nose pieces
  • Maximum pulling load of 1,940 pounds for increased versatility
  • Quick-release air valve increases safety
MSRP: $337.99
$235
View Details
Jet E-1440VS With ACU-RITE 303 CSS DRO 892465 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 CSS DRO 892465
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $31,819.99
$25,185
As low as $498.41/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894335 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894335
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,771.39
$32,350
As low as $640.20/mo
View Details
Jet JET — Replacement Inner Filter for AFS 2000 Air Filtration Systems 708723 at Elite Metal Tools
Jet JET — Replacement Inner Filter for AFS 2000 Air Filtration Systems 708723
  • Compatible with JET AFS-2000
  • High quality replacement filter
$205
View Details
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP700 2-Axis DRO & X-Axis Powerfeed 351155 at Elite Metal Tools
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP700 2-Axis DRO & X-Axis Powerfeed 351155
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $15,848.59
$12,295
As low as $399.58/mo
View Details
Jet JET — Infeed/Outfeed Tables for JWDS-2244 723541 at Elite Metal Tools
Jet JET — Infeed/Outfeed Tables for JWDS-2244 723541
  • Heavy duty tables fold for better storage
  • Tables are adjustable to level with precision
  • Tables assist with longer boards
  • Steel
  • Installation hardware included
MSRP: $343.99
$315
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894150 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894150
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,262.79
$32,695
As low as $647.03/mo
View Details
Jet JMD-40GH Geared Head Mill/Drill with Newall DP700 2-Axis DRO & X-Powerfeed 351141 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill with Newall DP700 2-Axis DRO & X-Powerfeed 351141
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $12,654.29
$9,825
As low as $319.31/mo
View Details
Jet Lathe Guard for JET 1640EVS, 1840EVS, & 1840DVR Lathes 719002 at Elite Metal Tools
Jet Lathe Guard for JET 1640EVS, 1840EVS, & 1840DVR Lathes 719002
  • Fits JET 1640EVS, 1840EVS, and 1840DVR Lathes
$205
View Details
Jet JET — Collet Closer CC-GHW for all Model W Lathes 321519 at Elite Metal Tools
Jet JET — Collet Closer CC-GHW for all Model W Lathes 321519
  • Precision ground components
  • Rear mounted lever action
  • Specially designed for each model
  • Uses 5C collets
MSRP: $4,054.29
$3,245
As low as $105.46/mo
View Details
Jet EGH-1740 With Newall DP700 DRO With Taper Attachment 892512 at Elite Metal Tools
Jet EGH-1740 With Newall DP700 DRO With Taper Attachment 892512
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $56,882.79
$44,345
As low as $877.58/mo
View Details
Jet JTM-1050EVS2/230 Mill With X, Y and Z-Axis Powerfeeds 690604 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With X, Y and Z-Axis Powerfeeds 690604
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $28,748.59
$22,195
As low as $439.23/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894410 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894410
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $48,405.69
$38,245
As low as $756.86/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO 892411 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO 892411
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $30,345.69
$23,320
As low as $461.50/mo
View Details
Jet JAT-480, 1/4", 1 HP Die Grinder 505480 at Elite Metal Tools
Jet JAT-480, 1/4", 1 HP Die Grinder 505480
  • 360° Rotating air inlet keeps the air hose tangle free for added safety
  • Comes standard with 1/4" Erickson collet
  • Impact resistant composite housings reduce tool weight and user fatigue.
  • Sealed ball bearing design keeps out contaminants promoting smooth operation
  • Upgraded Full, 1 HP motors provide the heavy-duty power needed for harsh industrial environments
MSRP: $322.99
$225
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Taper Attachment, 3HP 311445 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Taper Attachment, 3HP 311445
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $30,099.99
$23,145
As low as $458.03/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds 894314 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds 894314
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,051.39
$31,110
As low as $615.66/mo
View Details
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO and X-Axis Table Powerfeed 350129 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO and X-Axis Table Powerfeed 350129
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $10,934.29
$8,455
As low as $274.78/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds 894333 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds 894333
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,174.29
$31,195
As low as $617.34/mo
View Details
Jet E-1340VS With Newall DP700 DRO 892419 at Elite Metal Tools
Jet E-1340VS With Newall DP700 DRO 892419
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $27,765.69
$21,465
As low as $424.79/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894342 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894342
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,999.99
$33,225
As low as $657.52/mo
View Details
Jet Open Stand for JSG-96 Sander - (708596) 708596 at Elite Metal Tools
Jet Open Stand for JSG-96 Sander - (708596) 708596
  • Compatible with Jet JSG-96 Sander
  • Shop the Jet store for all your replacement part needs
MSRP: $288.69
$265
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894367 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894367
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,402.79
$32,075
As low as $634.76/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.