JET

  • Layout
Jet JMD-18 Mill/Drill With Newall DP500 DRO and X-Axis Table Powerfeed 350134 at Elite Metal Tools
Jet JMD-18 Mill/Drill With Newall DP500 DRO and X-Axis Table Powerfeed 350134
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $8,107.14
$6,689
As low as $217.39/mo
View Details
Jet JAT-820, Flux Chipper 505820 at Elite Metal Tools
Jet JAT-820, Flux Chipper 505820
  • Ball lock retainer permits quick tool change
  • Heavy-duty, heat-treated barrels and pistons for reliability and durability
  • Includes (1) wide angle chisel
  • Backed by the industry leading 2-Year Warranty
MSRP: $408
$276.99
View Details
Jet JET — RF Remote control for Dust Collector, 230V 708636D at Elite Metal Tools
Jet JET — RF Remote control for Dust Collector, 230V 708636D
  • Complete unit
  • Simply plug in your dust collector to the transmitter for instant remote control, no wiring needed
  • Works with all Duct Collectors up to 3 HP (230V ONLY)
$165
View Details
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351145 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351145
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $11,202.68
$8,999
As low as $292.46/mo
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351146 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351146
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $9,991.25
$8,139
As low as $264.51/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS100-020 104035 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS100-020 104035
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $11,194
$7,021.16
As low as $228.18/mo
View Details
Jet ETM-949EVS, Elite 9x49 Electronic Variable Speed Mill 230V, 3Ph 894050 at Elite Metal Tools
Jet ETM-949EVS, Elite 9x49 Electronic Variable Speed Mill 230V, 3Ph 894050
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $29,115.91
$23,699
As low as $469.00/mo
View Details
Jet IBG-8SSB 8" Industrial Buffer 577408 at Elite Metal Tools
Jet IBG-8SSB 8" Industrial Buffer 577408
  • CSA/CUS Certified
  • Heavy Cast Iron Bases
  • Oversized motor shafts, heavy retainer plates and massive lock nuts.
  • Safety switch with removable key
  • The wide range of spacer options allow you to run a huge variety of finishing wheels.
$445
View Details
Jet MBS-1014W-3, 10" x 14" Horizontal Mitering Bandsaw 414477 at Elite Metal Tools
Jet MBS-1014W-3, 10" x 14" Horizontal Mitering Bandsaw 414477
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Carbide blade guides with roller bearings
  • Coolant is distributed through the blade guides
  • Fully adjustable hydraulic downfeed with separate on/off control valve
MSRP: $10,195.71
$8,299
As low as $269.71/mo
View Details
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed 351051 at Elite Metal Tools
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed 351051
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $11,226.06
$8,999
As low as $292.46/mo
View Details
Jet 315mm Ferrous Manual Cold Saw | CS-315 414227 at Elite Metal Tools
Jet 315mm Ferrous Manual Cold Saw | CS-315 414227
  • Blade drive reduction gearbox operates in an oil bath for increased durability
  • Cast iron frame
  • Flood coolant system
  • Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
  • Fully adjustable material depth stop for sawing repeatability and increased production
MSRP: $3,930
$3,199
As low as $103.96/mo
View Details
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Axis Powerfeed 351165 at Elite Metal Tools
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Axis Powerfeed 351165
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $15,660.33
$12,799
As low as $415.96/mo
View Details
Jet J-7060, 12" x 20" Semi-Automatic Horizontal Bandsaw 414476 at Elite Metal Tools
Jet J-7060, 12" x 20" Semi-Automatic Horizontal Bandsaw 414476
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
MSRP: $17,510
$14,289
As low as $464.39/mo
View Details
Jet EVS-949 Mill with USA Air Powered Draw Bar 894375 at Elite Metal Tools
Jet EVS-949 Mill with USA Air Powered Draw Bar 894375
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $31,560.57
$25,689
As low as $508.38/mo
View Details
Jet JET — 1 micron Canister Filter Kit for DC-650 Dust Collector 708737C at Elite Metal Tools
Jet JET — 1 micron Canister Filter Kit for DC-650 Dust Collector 708737C
  • Reduces air resistance to provide a 10 to 20 percent more CFM than conventional dust collectors
  • Includes a canister filter and 5 clear plastic collection bags
  • Transparent bags make it easy to tell when they are full
  • Designed for the 708640 DC 650A dust collector
$426
View Details
Jet JCT-3645, 4" Stroke, Hex Shank, Open Handle Chipping Hammer 550645 at Elite Metal Tools
Jet JCT-3645, 4" Stroke, Hex Shank, Open Handle Chipping Hammer 550645
  • Comes with standard type retainer
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
  • Open style forged handle is engineered to dissipate the impact energy more efficiently, reducing user fatigue and increasing safety
  • Backed by the industry leading 2-Year Warranty
MSRP: $951
$647.99
As low as $21.05/mo
View Details
Jet HBS-56MVS, Variable Speed, Mitering 5" x 6" Horizontal Bandsaw, .5HP 115V 414558 at Elite Metal Tools
Jet HBS-56MVS, Variable Speed, Mitering 5" x 6" Horizontal Bandsaw, .5HP 115V 414558
  • Front legs feature leveling pads
  • Fully adjustable ball bearing blade guides
  • Hardened Ferrous 82-130 SFPM
  • Quick speed changes with the turn of a dial, no more belt changes
  • Variable Speed gives you the ability to cut various material
MSRP: $1,701.14
$1,379
As low as $44.81/mo
View Details
Jet DC-1200VX-CK3 Dust Collector, 2HP 3PH 230/460V, 2-Micron Canister Kit 710704K at Elite Metal Tools
Jet DC-1200VX-CK3 Dust Collector, 2HP 3PH 230/460V, 2-Micron Canister Kit 710704K
  • Eliminates premature filter clogging for sustained performance
  • High air velocity (CFM) design stands up to any competitive specifications
  • Includes four casters for maneuverability and total portability
  • Industrial controls designed for years of trouble-free use
  • Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
MSRP: $1,228.56
$1,049
As low as $34.09/mo
View Details
Jet JET — Replacement Blade, 1/2 x 0.0256 x 156 10T for VBS-18MWEVS 414426 at Elite Metal Tools
Jet JET — Replacement Blade, 1/2 x 0.0256 x 156 10T for VBS-18MWEVS 414426
  • 10T
  • Replacement blade for for Jet VBS-18MWEVS Bandsaw
$179
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Collet Closer, 3HP 311446 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Collet Closer, 3HP 311446
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $25,444.99
$20,799
As low as $411.61/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO,3HP 311448 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO,3HP 311448
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $21,068.57
$17,259
As low as $341.55/mo
View Details
Jet Stand for Jet JWL-1221VS Lathe 719202A at Elite Metal Tools
Jet Stand for Jet JWL-1221VS Lathe 719202A
MSRP: $380.84
$323
View Details
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 128-1/2" (4/6T) for EHB-916V 891095 at Elite Metal Tools
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 128-1/2" (4/6T) for EHB-916V 891095
  • Bimetal
  • 4/6T
  • 1" X .035" X 128-1/2"
$190
View Details
Jet ETM-949EVS Mill With 3-Axis ACU-RITE MILLPWR G2 CNC 894091 at Elite Metal Tools
Jet ETM-949EVS Mill With 3-Axis ACU-RITE MILLPWR G2 CNC 894091
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $76,316.59
$59,729
As low as $1,182.03/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.