JET

  • Layout
Jet JET Woodturning Carbide Chisels 6 Piece Set - (719901) 719901 at Elite Metal Tools
Jet JET Woodturning Carbide Chisels 6 Piece Set - (719901) 719901
  • JET Carbide Turning Tool Set includes 4 interchangeable cutting blades: Square (11mm), Square Arc (11mm), Round (12mm), and Diamond (28mm).
  • Light weight extendable anodized aluminum handle. Main handle is 11" with a 10.5" extension.
  • JET Carbide Turning Tool Set is packed in a custom wood case.
  • Stainless steel shaft will not rust
  • Carbide blades have a long cutting life
MSRP: $294.79
$269
View Details
Jet JBG-10A/JBG-10B, 10" Shop Bench Grinder and JPS-2A Stand 577103K at Elite Metal Tools
Jet JBG-10A/JBG-10B, 10" Shop Bench Grinder and JPS-2A Stand 577103K
MSRP: $1,142.59
$989
As low as $32.14/mo
View Details
Jet 3-HDT, 3-Ton Manual Trolley 262030 at Elite Metal Tools
Jet 3-HDT, 3-Ton Manual Trolley 262030
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $701.99
$489
View Details
Jet GH-1440B with Newall NMS300 323446 at Elite Metal Tools
Jet GH-1440B with Newall NMS300 323446
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $22,273.99
$17,025
As low as $336.92/mo
View Details
Jet JET Universal Benchtop Machine Table 728100 at Elite Metal Tools
Jet JET Universal Benchtop Machine Table 728100
  • Fits most JET benchtop machines.
  • The table has a 20" x 29" work surface.
  • Table height is adjustable from 30" to 35".
  • Steel construction with solid top. Can hold up to 400 pounds.
  • The bottom frame has holes for users to cut their own shelves for added storage.
$245
View Details
Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430 at Elite Metal Tools
Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430
  • 30' power cord length to match an electric hoist with 30' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
MSRP: $130.99
$125
View Details
Jet PT-2036JB, 20" x 36" 5,500 LB Capacity Pallet Truck 161004 at Elite Metal Tools
Jet PT-2036JB, 20" x 36" 5,500 LB Capacity Pallet Truck 161004
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $1,010.99
$659
As low as $21.41/mo
View Details
Jet SJ-20T, 20-Ton Screw Jack 441320 at Elite Metal Tools
Jet SJ-20T, 20-Ton Screw Jack 441320
  • Complies with ANSI/ASME B30.1 standards
  • Corrugated Pivoting Head
  • Corrugated pivoting head, contours to the load providing maximum surface contact
  • Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
  • Improved design requires less effort to lift a maximum capacity load
MSRP: $404.99
$275
View Details
Jet Abrasive Cut-off Saw 3PH 230/460V | AB-12 414240 at Elite Metal Tools
Jet Abrasive Cut-off Saw 3PH 230/460V | AB-12 414240
  • Cast iron wheel guard
  • CSA/CUS Certified
  • Dust collection hook-up on spark arrester
  • Following strict guidelines and electrical requirements, these JET saws are CSA/CUS certified
  • Ground vise plates for extra grip
MSRP: $4,791.39
$3,835
As low as $124.63/mo
View Details
Jet GHB-1340A Lathe With Newall NMS300 DRO With Taper Attachment 323115 at Elite Metal Tools
Jet GHB-1340A Lathe With Newall NMS300 DRO With Taper Attachment 323115
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $21,291.09
$16,315
As low as $322.87/mo
View Details
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO and Collet Closer 323376 at Elite Metal Tools
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO and Collet Closer 323376
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $34,768.59
$27,295
As low as $540.16/mo
View Details
Jet JVM-836-1 Mill With ACU-RITE 203 DRO 690177 at Elite Metal Tools
Jet JVM-836-1 Mill With ACU-RITE 203 DRO 690177
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $18,428.59
$14,110
As low as $458.57/mo
View Details
Jet 2SS-1C-20, 2-Ton Electric Chain Hoist 1-Phase 20' Lift 212000 at Elite Metal Tools
Jet 2SS-1C-20, 2-Ton Electric Chain Hoist 1-Phase 20' Lift 212000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $7,794.99
$4,395
As low as $142.83/mo
View Details
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515 at Elite Metal Tools
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $782.99
$530
As low as $17.22/mo
View Details
Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500 at Elite Metal Tools
Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $6,712.99
$3,845
As low as $124.96/mo
View Details
Jet SLT-660F, Scissor Lift Table With Folding Handle 140777 at Elite Metal Tools
Jet SLT-660F, Scissor Lift Table With Folding Handle 140777
  • All steel design of frame and table permit the transport of heavy materials
  • Easy-To-Use Hydraulic Foot Pump
  • Easy-to-use hydraulic foot pump for precision raising and lowering of table
  • Fixed rear wheels feature parking brakes for added safety
  • Fold-down handle for easy storage
MSRP: $1,277.99
$795
As low as $25.83/mo
View Details
Jet JVM-836-1 Mill With ACU-RITE 203 DRO , X and Y Powerfeeds 690162 at Elite Metal Tools
Jet JVM-836-1 Mill With ACU-RITE 203 DRO , X and Y Powerfeeds 690162
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $20,639.99
$15,849
As low as $313.65/mo
View Details
Jet JTJ-5ST, 5 Ton Hydraulic Toe Jack 454505 at Elite Metal Tools
Jet JTJ-5ST, 5 Ton Hydraulic Toe Jack 454505
  • Complies with ANSI/ASME B30.1 standards
  • Dual purpose jack designed for low or high clearances increases versatility
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Heat treated piston resists corrosion
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use
MSRP: $900.99
$595
As low as $19.33/mo
View Details
Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000 at Elite Metal Tools
Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $6,907.99
$3,945
As low as $128.21/mo
View Details
Jet GH-1440-3 Lathe with Taper Attachment 323401 at Elite Metal Tools
Jet GH-1440-3 Lathe with Taper Attachment 323401
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $32,188.59
$25,445
As low as $503.55/mo
View Details
Jet JET — 35-Piece Premium 5C Collet Set with Rack 650016 at Elite Metal Tools
Jet JET — 35-Piece Premium 5C Collet Set with Rack 650016
  • 35 collets
  • 1/16 to 1-1/8 by 16ths
  • Metal rack
  • Precision ground components
MSRP: $810.79
$745
As low as $24.21/mo
View Details
Jet JET — JPS-2A Pedestal Stand for Bench Grinders 577172 at Elite Metal Tools
Jet JET — JPS-2A Pedestal Stand for Bench Grinders 577172
  • Heavy-duty cast iron construction provides strength and durability
  • Wide stance base gives you a stable grinder workstation
  • Coolant tank and tool tray are on an adjustable platform for your convenience
  • Compatible with all JET Bench Grinders
MSRP: $270.29
$249
View Details
Jet JVM-836-1 Mill With X and Y-Axis Powerfeeds 690211 at Elite Metal Tools
Jet JVM-836-1 Mill With X and Y-Axis Powerfeeds 690211
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $15,357.09
$11,759
As low as $382.16/mo
View Details
Jet 6-Piece Premium R8 Collet Set CS-R8 650132 at Elite Metal Tools
Jet 6-Piece Premium R8 Collet Set CS-R8 650132
  • Precision hardened and ground collets
  • Premium collets with 0.0005mm T.I.R.
  • R-8 collets for use with milling machines
  • 1/8" to 3/4" by 1/8ths
  • Precision ground components
$210
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.