General

  • Blade/Arbor Diameter: 10″ / 3/4”
  • Arbor Tilting Range: 0° to 45°
  • Arbor Speed: 4000 RPM
  • Maximum Rip to Right of Blade: 52″
  • Swing: 17”
  • Drilling capacity: 1-1/8”
  • Chuck size: 5/8”
  • Spindle travel: 3-1/8”
  • Blade Diameter: 10”
  • Arbor Diameter: 3/4”
  • Arbor Tilting Range: 0° to 45°
  • Arbor Speed: 4000 RPM
  • Blade Diameter: 10”
  • Arbor Diameter: 3/4”
  • Arbor Tilting Range: 0° to 45°
  • Arbor Speed: 4000 RPM
  • Switch: Dual Auto Switch
  • Bag Capacity: 42 Gallons
  • Airflow Capacity: 1250 CFM
  • Blower Wheel Diameter: 11”
  • Cutting Depth: 1/2”
  • Cutting Width: 8”
  • Fence Tilting Left to Right: -45° to 45°
  • Fence: 4” x 33.5”
  • Blade/Arbor Diameter: 10” / 3/4”
  • Arbor Tilting Range: 0° to 45°
  • Arbor Speed: 4000 RPM
  • Maximum Rip to Right of Blade: 52”
  • Swing Over Bed: 12”
  • Swing Over Bed Gap: 15”
  • Length (Bed): 56”
  • Variable Speed: 500-3000 RPM
  • Bag Capacity: 42 gallon
  • Inlet Diameter: (1) 6”
  • Y Fitting Inlet: (2) 4”
  • Airflow Capacity: 1250 CFM
  • Motor: 2 HP, 120V, 1 Ph, 15A
  • Bag Capacity: 42 Gal
  • Airflow Capacity: 1550 CFM
  • Blower Wheel Diameter: 12.75”
  • Switch: Dual Auto Switch
  • Bag Capacity: 42 gallon
  • Air Flow Capacity: 1550 CFM
  • Motor: 2 HP, 120V, 60Hz, 1 Ph, 15/7.5 A
  • Bag Capacity: 83 gallon (377 L)
  • Switch: Dual Auto Switch
  • Static Pressure: 15.5” of water
  • Bag Filter: 2 Microns
  • Airflow Capacity: 2280 CFM
  • Bag Capacity: 83 Gallon
  • Static Pressure: 11” of water
  • Blower Wheel: 12”
  • Swing: 17”
  • Drilling capacity: 1-1/8”
  • Chuck size: 5/8”
  • Spindle travel: 3-1/8”
  • Blade/Arbor Diameter: 10” / 3/4”
  • Arbor Tilting Range: 0° to 45°
  • Arbor Speed: 4000 RPM
  • Maximum Rip to the Right of Blade: 36”
  • Blade/Arbor Diameter: 10” / 3/4”
  • Arbor Tilting Range: 0° to 45°
  • Arbor Speed: 4000 RPM
  • Maximum Rip to Right of Blade: 36”
  • Wheel speeds (2): 436 & 909 RPM
  • Blade speeds (2): 1575 & 3280 lin. FPM
  • Blade width: 1/8″ to 3/4″
  • Blade length: 100-3/4″
  • Blade/Arbor Diameter: 10” / 3/4”
  • Arbor Tilting Range: 0° to 45°
  • Arbor Speed: 4000 RPM
  • Maximum Rip to Right of Blade: 52”
  • Blade Diameter: 10”
  • Arbor Diameter: 3/4”
  • Arbor Tilting Range: 0° to 45°
  • Arbor Speed: 4000 RPM
  • Blade Diameter: 10”
  • Arbor Diameter: 3/4”
  • Arbor Tilting Range: 0° to 45°
  • Arbor Speed: 4000 RPM
  • Swing: 20”
  • Drilling capacity: 1.25”
  • Chuck size: 0.75”
  • Spindle travel: 4.75”
  • Filter Cycle (per Minute): 1.9
  • Cycles per Hour (20 ft x 20 ft x 8 ft): 32.2
  • Motor: 1/3 HP (0.33 HP), 110V, 60Hz, 1 Ph, 6P, 4.5A
  • Outer Filter: 5 microns
  • Blade/Arbor Diameter: 10” / 3/4”
  • Arbor Tilting Range: 0° to 45°
  • Arbor Speed: 4000 RPM
  • Maximum Rip to the Right of Blade: 52”
  • Blade/Arbor Diameter: 10″ / 3/4”
  • Arbor Tilting Range: 0° to 45°
  • Arbor Speed: 4000 RPM
  • Maximum Rip to Right of Blade: 36″