Cantek

Cantek Three Phase 230V Automatic Edgebander with Premilling & Corner Rounding MX370P

Panel thickness: 0.315”~1.77” (8~45 mm)
Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
Working table height: 38” (960 mm)
Power: 10.9 HP 230V Three Phase

$37,485.00

As low as $741/mo

View Details

Cantek 10 HP 230V Single Blade Rip Saw 303S

Saw blade diameter: 8 – 12″
Feed speeds: 3 (50, 65, 85 FPM)
Table size: 30″ x 50″
Table height: 31-7/8″

$14,175.00

As low as $460/mo

View Details

Cantek Single Phase Standard Automatic Edgebander MX340M

Feeding speed: 23 FPM
Panel thickness: 0.472~1.77”
Edge thickness: 0.0158”~0.118”
Power: 5 HP Single Phase

$17,325.00

As low as $342/mo

View Details

Cantek Standard Single Phase Automatic Edgebander with Pre-milling MX350M

Feeding speed: 23 FPM (7 m/min.)
Panel thickness: 0.472~1.77” (12~45 mm)
Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
Working table height: 33.7” (856mm)

$22,995.00

As low as $455/mo

View Details

Cantek Single Phase 230V High Frequency Automatic Edgebander MX340

Feeding speed: 29.5 FPM (9 m/min.)
Panel thickness: 0.315~1.77” (8~45 mm)
Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
Power: 7.4 HP Single Phase 230V

$22,365.00

As low as $442/mo

View Details

Cantek 12” 230V Glue Line Ripsaw C12RSH

Feed speeds variable: 50 to 120 FPM
Maximum workpiece thickness: 3.35″
Minimum workpiece length: 8″
Table size: 39″ x 57″

$20,475.00

As low as $405/mo

View Details

Cantek 60 HP 230V Multi Ripsaw MRS-12

Saw Motor: 60 HP 230 volt
Feed Speeds: 25 – 100 FPM
Table Size: 30” x 60″
Table Height from floor: 33.5″

$44,520.00

As low as $881/mo

View Details

Cantek 50 HP 230V 12" Multi Ripsaw MRS-300

Maximum Cutting Width: 11.8” (300mm)
Saw Motor HP: 50 HP – Voltage 230/3/60
Feed Speeds: 25 – 100 FPM (7.5~30 m/min)
Table Size: 60″ x 30” (1530x760mm)

$37,170.00

As low as $735/mo

View Details

Cantek Three Phase 230V High Frequency Automatic Edgebander MX340

Feeding speed: 29.5 FPM (9 m/min.)
Panel thickness: 0.315~1.77” (8~45 mm)
Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
Power: 7.4 HP Three Phase 230V

$22,785.00

As low as $450/mo

View Details

Cantek Three Phase 230V High Frequency Automatic Edgebander with Pre-Milling MX350

Feeding speed: 29.5 FPM
Panel thickness: 0.472″~1.77″
Edge thickness: 0.0158″~0.118″
Working table height: 33.47″

$30,975.00

As low as $612/mo

View Details

Cantek 20HP 230V Single Blade Glue Line Ripsaw SRS-330

Max. workpiece thickness: 4.33″
Min. workpiece length: 8″
Feed speeds variable: 30 to 130 FPM
Table size: 36.6″ x 64.6″

$23,520.00

As low as $465/mo

View Details

Cantek Three Phase Standard Automatic Edgebander MX340M

Feeding speed: 23 FPM
Panel thickness: 0.472~1.77”
Edge thickness: 0.0158”~0.118”
Power: 5 HP Three Phase

$17,325.00

As low as $342/mo

View Details

Cantek 12” 460V Glue Line Ripsaw C12RSH

Feed speeds variable: 50 to 120 FPM
Maximum workpiece thickness: 3.35″
Minimum workpiece length: 8″
Table size: 39″ x 57″

$20,475.00

As low as $405/mo

View Details

Cantek 1HP Three Phase Automatic Edgebander MX370M (3PH)

Panel Thickness: 0.472 -1.77”
Edge Thickness: 0.0158”-0.118”
Feeding Speed: 23 FPM (7 m/min.)
Feed Motor: 1 HP

$27,615.00

As low as $546/mo

View Details

Cantek Portable Edge Bander Package MX550AU

Tape Thickness: (0.4 – 3 mm)
Width of Tape: (10 – 65 mm)
Feeding Speed: 0.1 ~ 6 M/mm
Glue Pot Capacity: 400 ml

$2,835.00

As low as $92/mo

View Details

Cantek 20HP 230V Bottom Cutting Straight Line Ripsaw with 10’ Guarantee Glue Line R18 (20HP)

Minimum Length: 6″
Maximum Sawblade Diameter: 18″
Sawblade Included with Machine: 14″
Sawblade Bore: 2″

$29,715.00

As low as $588/mo

View Details

Cantek 20HP 575V Bottom Cutting Straight Line Ripsaw with 10’ Guarantee Glue Line R18 (20HP)

Minimum Length: 6″
Maximum Sawblade Diameter: 18″
Sawblade Included with Machine: 14″
Sawblade Bore: 2″

$29,715.00

As low as $588/mo

View Details

Cantek 60 HP 460V Multi Ripsaw MRS-12

Saw Motor: 60 HP 460 volt
Feed Speeds: 25 – 100 FPM
Table Size: 30” x 60″
Table Height from floor: 33.5″

$44,520.00

As low as $881/mo

View Details

Cantek 14” Single Blade Glue Line Ripsaw with Inverter C14RS

Feed speeds variable: 49 to 118 FPM
Maximum work piece thickness: 4.92″
Minimum work piece length: 8″
Table size: 50″ x 75″

$29,190.00

As low as $577/mo

View Details

Cantek 15HP 460V Three Phase Bottom Cutting Straight Line Ripsaw R16

Maximum Sawblade Diameter: 14”
Maximum Cutting Thickness: 3”
Sawblade Bore: 2"
Number of Pressure Rolls: 8 rolls

$24,885.00

As low as $492/mo

View Details

Cantek Standard Three Phase Automatic Edgebander with Pre-milling MX350M

Feeding speed: 23 FPM (7 m/min.)
Panel thickness: 0.472~1.77” (12~45 mm)
Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
Working table height: 33.7” (856mm)

$22,995.00

As low as $455/mo

View Details

Cantek 20HP 460V Bottom Cutting Straight Line Ripsaw with 10’ Guarantee Glue Line R18 (20HP)

Minimum Length: 6″
Maximum Sawblade Diameter: 18″
Sawblade Included with Machine: 14″
Sawblade Bore: 2″

$29,715.00

As low as $588/mo

View Details

Cantek 20HP 460V Single Blade Glue Line Ripsaw SRS-330

Max. workpiece thickness: 4.33″
Min. workpiece length: 8″
Feed speeds variable: 30 to 130 FPM
Table size: 36.6″ x 64.6″

$23,520.00

As low as $465/mo

View Details

Cantek 10 HP 460V Single Blade Rip Saw 303S

Saw blade diameter: 8 – 12″
Feed speeds: 3 (50, 65, 85 FPM)
Table size: 30″ x 50″
Table height: 31-7/8″

$14,175.00

As low as $460/mo

View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry.

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.

What is the Elite Advantage?