Cantek

  • Cutting Capacity (Thickness x Width): 1″ x 10″, 2″ x 9″, 3″ x 8″
  • Cycle Speed: 95 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size: 14″
$7,455
As low as $242.28/mo
  • Feeding speed: 23 FPM
  • Panel thickness: 0.472~1.77”
  • Edge thickness: 0.0158”~0.118”
  • Power: 5 HP Single Phase
$19,740
As low as $390.65/mo
  • Panel thickness: 0.315”~1.77” (8~45 mm)
  • Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
  • Working table height: 38” (960 mm)
  • Power: 10.9 HP 230V Three Phase
$42,840
As low as $847.80/mo
  • Saw blade diameter: 8 – 12″
  • Feed speeds: 3 (50, 65, 85 FPM)
  • Table size: 30″ x 50″
  • Table height: 31-7/8″
$15,750
As low as $311.69/mo
  • Feeding speed: 23 FPM (7 m/min.)
  • Panel thickness: 0.472~1.77” (12~45 mm)
  • Edge thickness: 0.0158”~0.118”  (0.4 ~ 3 mm)
  • Working table height: 33.7” (856mm)
$26,250
As low as $519.48/mo
  • Cutting Angles: +60° ~ 0° ~-60°
  • Cycle Speed: 30-45 cuts/min
  • Saw Blade Size: 20″
  • Saw Arbor Diameter: 1″
$19,950
As low as $394.81/mo
  • Panel thickness: 0.315” - 1.77”
  • Min panel length: 6.7”
  • Working table height: 33.5”
  • Dust collection outlet: Ø 5” x 2 = 1200 CFM 
$25,725
As low as $509.09/mo
  • Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
  • Cycle Speed: 45 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size (Optional): 18″
$8,190
As low as $266.17/mo
  • Cutting Capacity (Thickness x Width): 2″x21″, 4″x19″, 6″x15″, 7″x8″
  • Cycle Speed: 40 strokes/min
  • Cycle Operation: Air / mechanical
  • Saw Blade Size: 24″ max. (20″ min.)
$16,065
As low as $317.92/mo
  • Feed speeds variable: 50 to 120 FPM
  • Maximum workpiece thickness: 3.35″
  • Minimum workpiece length: 8″
  • Table size: 39″ x 57″
$22,785
As low as $450.91/mo
  • Saw Motor: 60 HP 230 volt
  • Feed Speeds: 25 – 100 FPM
  • Table Size: 30” x 60″
  • Table Height from floor: 33.5″
$50,190
As low as $993.26/mo
  • Cutting Capacity (Thickness x Width): 2″x33″, 4″x31″, 6″x29″, 8”x25”, 10”x20”, 12”x12”
  • Cycle Speed: 10-15 strokes/min
  • Cycle Operation: Pneumatic
  • Saw Blade Size: 36”
$29,925
As low as $592.21/mo
  • Panel Thickness: 0.472 -1.77”
  • Edge Thickness: 0.0158”-0.118”
  • Feeding Speed: 23 FPM (7 m/min.)
  • Feed Motor: 1 HP
$31,710
As low as $627.54/mo
  • Cutting Capacity (Thickness x Width): 2″x21″, 4″x19″, 6″x15″, 7″x8″
  • Cycle Speed: 40 strokes/min
  • Cycle Operation: Air / mechanical
  • Saw Blade Size: 24″ max. (20″ min.)
$15,435
As low as $305.45/mo
  • Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
  • Cycle Speed: 45 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size (Optional): 18″
$8,505
As low as $276.41/mo
  • Maximum Sawblade Diameter: 14”
  • Maximum Cutting Thickness: 3”
  • Sawblade Bore: 2"
  • Number of Pressure Rolls: 8 rolls
$27,510
As low as $544.42/mo
  • Cutting Angles: +60° ~ 0° ~ -60°
  • Cycle Speed: 35-40 cuts/min
  • Saw Blade Size: 24″
  • Saw Arbor Diameter: 1″
$31,395
As low as $621.30/mo
  • Panel thickness: 0.315” - 1.77”
  • Max pre-milling thickness: 1.77”
  • Working table height: 33.5”
  • Dust collection outlet: Ø 5” x 3 = 1800 CFM 
$35,595
As low as $704.42/mo
  • Maximum Cutting Width: 11.8” (300mm)
  • Saw Motor HP: 50 HP – Voltage 230/3/60
  • Feed Speeds: 25 – 100 FPM (7.5~30 m/min)
  • Table Size: 60″ x 30” (1530x760mm)
$41,685
As low as $824.94/mo
  • Cutting Capacity (Thickness x Width): 2″x27″, 4″x24″, 6″x21″, 8″x16″, 10”x10”
  • Cycle Speed: 10-15 strokes/min
  • Cycle Operation: Pneumatic
  • Saw Blade Size: 30”
$21,000
As low as $415.59/mo
  • Feeding speed: 23 FPM
  • Panel thickness: 0.472~1.77”
  • Edge thickness: 0.0158”~0.118”
  • Power: 5 HP Three Phase
$19,740
As low as $390.65/mo
  • Max. Cutting Range (W x H) – 11.8” x 2.75” OR 5.9” x 3.9” with 18” Blade
  • Saw Spindle Speed: 3200 RPM
  • Feed Motor (Servo Motor): 2.7HP
  • Max. Feed Speed: Variable to 262 ft/min
$64,680
As low as $1,280.01/mo
  • Panel thickness: 0.315” - 1.77”
  • Min panel length: 6.7”
  • Working table height: 33.5”
  • Dust collection outlet: Ø 5” x 2 = 1200 CFM 
$26,145
As low as $517.40/mo
  • Minimum Length: 6″
  • Maximum Sawblade Diameter: 18″
  • Sawblade Included with Machine: 14″
  • Sawblade Bore: 2″
$32,760
As low as $648.32/mo

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.