Cantek

  • Layout
Cantek Single Phase Standard Automatic Edgebander MX340M at Elite Metal Tools
Cantek Single Phase Standard Automatic Edgebander MX340M
  • Feeding speed: 23 FPM
  • Panel thickness: 0.472~1.77”
  • Edge thickness: 0.0158”~0.118”
  • Power: 5 HP Single Phase
$19,740
As low as $390.65/mo
View Details
Cantek Three Phase 230V Automatic Edgebander with Premilling & Corner Rounding MX370P at Elite Metal Tools
Cantek Three Phase 230V Automatic Edgebander with Premilling & Corner Rounding MX370P
  • Panel thickness: 0.315”~1.77” (8~45 mm)
  • Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
  • Working table height: 38” (960 mm)
  • Power: 10.9 HP 230V Three Phase
$42,840
As low as $847.80/mo
View Details
Cantek 12” x 166” Oscillating Edge Sander OES-512D at Elite Metal Tools
Cantek 12” x 166” Oscillating Edge Sander OES-512D
  • Sanding motor: 10 HP
  • Sanding belt size: 12” x 166”
  • Front & Rear Table Size: 10.43” x 60.9”
  • Table: side: 13.8” x 17.7”
$12,705
As low as $412.91/mo
View Details
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring D405M-10 at Elite Metal Tools
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring D405M-10
  • 5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$14,595
As low as $474.33/mo
View Details
Cantek 230V 3-Sided Linear Brush Sander LBS-300-5S at Elite Metal Tools
Cantek 230V 3-Sided Linear Brush Sander LBS-300-5S
  • Max. working width: 11″
  • Max. working height: 4″
  • Feed speed (Variable): 6.5 ~ 27 FPM
  • Speed of sanding wheel: 200 ~ 1200 RPM            
$19,635
As low as $388.57/mo
View Details
Cantek Standard Single Phase Automatic Edgebander with Pre-milling MX350M at Elite Metal Tools
Cantek Standard Single Phase Automatic Edgebander with Pre-milling MX350M
  • Feeding speed: 23 FPM (7 m/min.)
  • Panel thickness: 0.472~1.77” (12~45 mm)
  • Edge thickness: 0.0158”~0.118”  (0.4 ~ 3 mm)
  • Working table height: 33.7” (856mm)
$26,250
As low as $519.48/mo
View Details
Cantek 5 HP Single Phase 8’ Sliding Table Saw with Scoring D405M-8 at Elite Metal Tools
Cantek 5 HP Single Phase 8’ Sliding Table Saw with Scoring D405M-8
  • 5 hp single phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,965
As low as $453.86/mo
View Details
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC at Elite Metal Tools
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
$19,005
As low as $376.10/mo
View Details
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring P305 at Elite Metal Tools
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring P305
  • 5 HP single phase main motor with 1 HP scoring motor
  • 51″ rip capacity
  • Sliding table dimensions: 10 ft. x 14”
  • Blade tilt: 0 – 45°
$11,550
As low as $375.37/mo
View Details
Cantek 230V Single Phase 29FPM Automatic Compact Edgebander with Quick-Change Glue Pot MX340 at Elite Metal Tools
Cantek 230V Single Phase 29FPM Automatic Compact Edgebander with Quick-Change Glue Pot MX340
  • Panel thickness: 0.315” - 1.77”
  • Min panel length: 6.7”
  • Working table height: 33.5”
  • Dust collection outlet: Ø 5” x 2 = 1200 CFM 
$25,725
As low as $509.09/mo
View Details
Cantek 5 HP Single Phase 5’ Sliding Table Saw with Scoring P30 at Elite Metal Tools
Cantek 5 HP Single Phase 5’ Sliding Table Saw with Scoring P30
  • Sliding table dimension: 63” x 12.4”
  • 5 HP Single Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
$9,765
As low as $317.36/mo
View Details
Cantek Classic S Single Phase 37” x 60” Wide Belt Sander S371 at Elite Metal Tools
Cantek Classic S Single Phase 37” x 60” Wide Belt Sander S371
  • Main Motor: 10 HP
  • Working Width: 36″
  • Minimum Part Length: 12.5″
  • Maximum Thickness Opening: 5.9″
$20,895
As low as $413.51/mo
View Details
Cantek 7.5 HP Three Phase 10’ Sliding Table Saw with Scoring D405M-10 at Elite Metal Tools
Cantek 7.5 HP Three Phase 10’ Sliding Table Saw with Scoring D405M-10
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$14,595
As low as $474.33/mo
View Details
Cantek 10HP Three Phase 16” Tilt Arbor Table Saw TA16B at Elite Metal Tools
Cantek 10HP Three Phase 16” Tilt Arbor Table Saw TA16B
  • Max. depth of cut at 90°: 5 1/2″
  • Max. depth of cut at 45°: 3 7/8″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$6,510
As low as $211.57/mo
View Details
Cantek 230V Three Phase 43” Wide Belt Sander with 20HP Motor and 60” Belt C431 at Elite Metal Tools
Cantek 230V Three Phase 43” Wide Belt Sander with 20HP Motor and 60” Belt C431
  • Abrasive belt size: 44” x 60”
  • Max width stock: 43”
  • Max thickness opening: 5.9”
  • Feed speed (variable): 13 to 52 FPM
$28,980
As low as $573.51/mo
View Details
Cantek 9” x 138” Oscillating Edge Sander PW-120E at Elite Metal Tools
Cantek 9” x 138” Oscillating Edge Sander PW-120E
  • Working Capacity (LxH) 47” x 8”
  • Belt Size (LxH) 138 ½” x 9”
  • Sanding Belt Speed 1080 m/min (3544 FPM)
  • Motor 3HP: 230-volt 3 phase
$8,610
As low as $279.82/mo
View Details
Cantek 230V Single Phase 36” Wide Belt Sander with 60” Belt C371 at Elite Metal Tools
Cantek 230V Single Phase 36” Wide Belt Sander with 60” Belt C371
  • Abrasive belt size: 37” x 60” 
  • Main motor: 10HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$22,995
As low as $455.07/mo
View Details
Cantek 230V Three Phase 36” Wide Belt Sander with 60” Belt C371 at Elite Metal Tools
Cantek 230V Three Phase 36” Wide Belt Sander with 60” Belt C371
  • Abrasive belt size: 37” x 60” 
  • Main motor: 20HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$22,050
As low as $436.36/mo
View Details
Cantek 10HP Three Phase 14” Tilt Arbor Table Saw TA1214 at Elite Metal Tools
Cantek 10HP Three Phase 14” Tilt Arbor Table Saw TA1214
  • Max. depth of cut at 90°: 5″
  • Max. depth of cut at 45°: 3 1/2″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$5,985
As low as $194.51/mo
View Details
Cantek 1HP Three Phase Automatic Edgebander MX370M (3PH) at Elite Metal Tools
Cantek 1HP Three Phase Automatic Edgebander MX370M (3PH)
  • Panel Thickness: 0.472 -1.77”
  • Edge Thickness: 0.0158”-0.118”
  • Feeding Speed: 23 FPM (7 m/min.)
  • Feed Motor: 1 HP
$31,710
As low as $627.54/mo
View Details
Cantek 5HP 230V Single Phase 12” Tilt Arbor Table Saw TA12 at Elite Metal Tools
Cantek 5HP 230V Single Phase 12” Tilt Arbor Table Saw TA12
  • Max. depth of cut at 90°: 4″
  • Max. depth of cut at 45°: 2 3/4″
  • Table size: 48″x30″
  • Electrics: 230/1/60
$4,095
As low as $133.08/mo
View Details
Cantek SRN-Series 230V Three Phase Heavy-Duty 53”x75” Widebelt Planer-Sander with Variable Feed Speed SR1300NDA at Elite Metal Tools
Cantek SRN-Series 230V Three Phase Heavy-Duty 53”x75” Widebelt Planer-Sander with Variable Feed Speed SR1300NDA
  • 1st main motor (planer): 40 HP 
  • Min part length: 16.9”
  • Feed speed (variable): 13 to 59 FPM
  • Pass line height: 37” 
$107,730
As low as $2,131.97/mo
View Details
Cantek SRN-Series 460V Three Phase Heavy-Duty 53”x75” Widebelt Planer-Sander with Variable Feed Speed SR1300NDA at Elite Metal Tools
Cantek SRN-Series 460V Three Phase Heavy-Duty 53”x75” Widebelt Planer-Sander with Variable Feed Speed SR1300NDA
  • 1st main motor (planer): 40 HP 
  • Min part length: 16.9”
  • Feed speed (variable): 13 to 59 FPM
  • Pass line height: 37” 
$107,730
As low as $2,131.97/mo
View Details
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC at Elite Metal Tools
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
$19,005
As low as $376.10/mo
View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.