Cantek

  • Max. working capacity (W x H): 15 3/4″ x 9.8″     
  • Saw wheel diameter: 28″             
  • Feed speed: variable: 13~90 FPM             
  • Conveyor belt size: 15.16″ x 215.4″              
$32,970
As low as $652.47/mo
  • Sanding motor: 10 HP
  • Sanding belt size: 12” x 166”
  • Front & Rear Table Size: 10.43” x 60.9”
  • Table: side: 13.8” x 17.7”
$12,705
As low as $412.91/mo
  • 5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$14,595
As low as $474.33/mo
  • Max. working width: 11″
  • Max. working height: 4″
  • Feed speed (Variable): 6.5 ~ 27 FPM
  • Speed of sanding wheel: 200 ~ 1200 RPM            
$19,635
As low as $388.57/mo
  • 5 hp single phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,965
As low as $453.86/mo
  • Max. Input Board Size: 11.8” (Wide) x 9.8” (Thick) (300 x 250mm)
  • Conveyor belt size: 11.2” x 215.3” (285 x 5470mm)
  • Diameter of saw wheel: 28” Dia. x 1” Wide
  • Main Motor: 20 HP
$15,855
As low as $313.77/mo
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
$19,005
As low as $376.10/mo
  • 5 HP single phase main motor with 1 HP scoring motor
  • 51″ rip capacity
  • Sliding table dimensions: 10 ft. x 14”
  • Blade tilt: 0 – 45°
$11,550
As low as $375.37/mo
  • Sliding table dimension: 63” x 12.4”
  • 5 HP Single Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
$9,765
As low as $317.36/mo
  • Main Motor: 10 HP
  • Working Width: 36″
  • Minimum Part Length: 12.5″
  • Maximum Thickness Opening: 5.9″
$20,895
As low as $413.51/mo
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$14,595
As low as $474.33/mo
  • Max. depth of cut at 90°: 5 1/2″
  • Max. depth of cut at 45°: 3 7/8″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$6,510
As low as $211.57/mo
  • Abrasive belt size: 44” x 60”
  • Max width stock: 43”
  • Max thickness opening: 5.9”
  • Feed speed (variable): 13 to 52 FPM
$28,980
As low as $573.51/mo
  • Working Capacity (LxH) 47” x 8”
  • Belt Size (LxH) 138 ½” x 9”
  • Sanding Belt Speed 1080 m/min (3544 FPM)
  • Motor 3HP: 230-volt 3 phase
$8,610
As low as $279.82/mo
  • Abrasive belt size: 37” x 60” 
  • Main motor: 10HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$22,995
As low as $455.07/mo
  • Abrasive belt size: 37” x 60” 
  • Main motor: 20HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$22,050
As low as $436.36/mo
  • Max. depth of cut at 90°: 5″
  • Max. depth of cut at 45°: 3 1/2″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$5,985
As low as $194.51/mo
  • Saw Wheel Diameter: 37″
  • Table size: 45-1/4” x 31-1/2″
  • Throat Capacity: 36-1/2″
  • Motor: 10 HP
$15,855
As low as $313.77/mo
  • Max. depth of cut at 90°: 4″
  • Max. depth of cut at 45°: 2 3/4″
  • Table size: 48″x30″
  • Electrics: 230/1/60
$4,095
As low as $133.08/mo
  • Max. Input Board size: 11.8” (Wide) x 9.8” (Thick)
  • Conveyor belt size: 11.2” x 215.3”
  • Main Motor: 20 HP – Voltage 230/3/60
  • Max. infeed speed: 52.5 FPM (16 M/min)
$21,210
As low as $419.74/mo
  • 1st main motor (planer): 40 HP 
  • Min part length: 16.9”
  • Feed speed (variable): 13 to 59 FPM
  • Pass line height: 37” 
$107,730
As low as $2,131.97/mo
  • 1st main motor (planer): 40 HP 
  • Min part length: 16.9”
  • Feed speed (variable): 13 to 59 FPM
  • Pass line height: 37” 
$107,730
As low as $2,131.97/mo
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
$19,005
As low as $376.10/mo
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,860
As low as $450.45/mo

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.