Cantek

  • Layout
Cantek 3 HP Single Phase 12” Spiral Head Jointer J127LH at Elite Metal Tools
Cantek 3 HP Single Phase 12” Spiral Head Jointer J127LH
  • Motor: 3 HP – 1 Phase
  • Max. cutting width: 12"
  • Max. depth of cut: 3/4"
  • Table size: 12 x 84" long
$9,135
As low as $296.88/mo
View Details
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring D405M-10 at Elite Metal Tools
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring D405M-10
  • 5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,965
As low as $453.86/mo
View Details
Cantek 5 HP Single Phase 8’ Sliding Table Saw with Scoring D405M-8 at Elite Metal Tools
Cantek 5 HP Single Phase 8’ Sliding Table Saw with Scoring D405M-8
  • 5 hp single phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,335
As low as $433.38/mo
View Details
Cantek 20 HP Single Head Economical Horizontal Resaw HR12E at Elite Metal Tools
Cantek 20 HP Single Head Economical Horizontal Resaw HR12E
  • Max. Input Board Size: 11.8” (Wide) x 9.8” (Thick) (300 x 250mm)
  • Conveyor belt size: 11.2” x 215.3” (285 x 5470mm)
  • Diameter of saw wheel: 28” Dia. x 1” Wide
  • Main Motor: 20 HP
$15,225
As low as $301.30/mo
View Details
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC at Elite Metal Tools
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
$18,060
As low as $357.40/mo
View Details
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring P305 at Elite Metal Tools
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring P305
  • 5 HP single phase main motor with 1 HP scoring motor
  • 51″ rip capacity
  • Sliding table dimensions: 10 ft. x 14”
  • Blade tilt: 0 – 45°
$11,025
As low as $358.31/mo
View Details
Cantek 5 HP Single Phase 20” Planer with Spiral Cutterhead P20HV at Elite Metal Tools
Cantek 5 HP Single Phase 20” Planer with Spiral Cutterhead P20HV
  • Max. width: 20"
  • Max. thickness: 8-5/8"
  • Feed speed: 20 & 30 FPM
  • Main motor: 5 HP
$9,450
As low as $307.12/mo
View Details
Cantek 5 HP Single Phase 5’ Sliding Table Saw with Scoring P30 at Elite Metal Tools
Cantek 5 HP Single Phase 5’ Sliding Table Saw with Scoring P30
  • Sliding table dimension: 63” x 12.4”
  • 5 HP Single Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
$9,345
As low as $303.71/mo
View Details
Cantek 7.5 HP Three Phase 10’ Sliding Table Saw with Scoring D405M-10 at Elite Metal Tools
Cantek 7.5 HP Three Phase 10’ Sliding Table Saw with Scoring D405M-10
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,965
As low as $453.86/mo
View Details
Cantek 10HP Three Phase 16” Tilt Arbor Table Saw TA16B at Elite Metal Tools
Cantek 10HP Three Phase 16” Tilt Arbor Table Saw TA16B
  • Max. depth of cut at 90°: 5 1/2″
  • Max. depth of cut at 45°: 3 7/8″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$6,195
As low as $201.33/mo
View Details
Cantek 10HP Three Phase 14” Tilt Arbor Table Saw TA1214 at Elite Metal Tools
Cantek 10HP Three Phase 14” Tilt Arbor Table Saw TA1214
  • Max. depth of cut at 90°: 5″
  • Max. depth of cut at 45°: 3 1/2″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$5,670
As low as $184.27/mo
View Details
Cantek 5 HP Three Phase 20” Planer with Spiral Cutterhead P20HV at Elite Metal Tools
Cantek 5 HP Three Phase 20” Planer with Spiral Cutterhead P20HV
  • Max. width: 20"
  • Max. thickness: 8-5/8"
  • Feed speed: 20 & 30 FPM
  • Main motor: 5 HP
$8,610
As low as $279.82/mo
View Details
Cantek 37” Bandsaw Resaw 10 HP Three Phase Motor HB-950A at Elite Metal Tools
Cantek 37” Bandsaw Resaw 10 HP Three Phase Motor HB-950A
  • Saw Wheel Diameter: 37″
  • Table size: 45-1/4” x 31-1/2″
  • Throat Capacity: 36-1/2″
  • Motor: 10 HP
$15,225
As low as $301.30/mo
View Details
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC at Elite Metal Tools
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
$18,060
As low as $357.40/mo
View Details
Cantek 5HP 230V Single Phase 12” Tilt Arbor Table Saw TA12 at Elite Metal Tools
Cantek 5HP 230V Single Phase 12” Tilt Arbor Table Saw TA12
  • Max. depth of cut at 90°: 4″
  • Max. depth of cut at 45°: 2 3/4″
  • Table size: 48″x30″
  • Electrics: 230/1/60
$3,885
As low as $126.26/mo
View Details
Cantek 20” Bandsaw 3 HP Three Phase Motor HB-500R at Elite Metal Tools
Cantek 20” Bandsaw 3 HP Three Phase Motor HB-500R
  • Saw wheel diameter: 20″
  • Motor: 3HP
  • Table Size: 26-3/4″ x 20-1/2″
  • Throat Capacity: 18-3/4″
$4,999
As low as $162.46/mo
View Details
Cantek 7.5 HP Three Phase 8’ Sliding Table Saw with Scoring D405M-8 at Elite Metal Tools
Cantek 7.5 HP Three Phase 8’ Sliding Table Saw with Scoring D405M-8
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,230
As low as $429.97/mo
View Details
Cantek 10’ Sliding Table with Powered Rise and Fall D405A at Elite Metal Tools
Cantek 10’ Sliding Table with Powered Rise and Fall D405A
  • 7.5 HP main motor with 1HP scoring motor
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • Sliding table dimension: 126” x 15 ½”
$15,645
As low as $309.61/mo
View Details
Cantek 5 HP Three Phase 12” Spiral Head Jointer J127LH at Elite Metal Tools
Cantek 5 HP Three Phase 12” Spiral Head Jointer J127LH
  • Motor: 5 HP – 3 Phase
  • Max. cutting width: 12"
  • Max. depth of cut: 3/4"
  • Table size: 12 x 84" long
$8,820
As low as $286.65/mo
View Details
Cantek 5 HP Three Phase 10’ Sliding Table Saw with Scoring P305 at Elite Metal Tools
Cantek 5 HP Three Phase 10’ Sliding Table Saw with Scoring P305
  • 5 HP three phase main motor with 1 HP scoring motor
  • 51″ rip capacity
  • Sliding table dimensions: 10 ft. x 14”
  • Blade tilt: 0 – 45°
$10,710
As low as $348.07/mo
View Details
Cantek 32" Three Phase 20 HP Band Resaw with Feeder HB800 at Elite Metal Tools
Cantek 32" Three Phase 20 HP Band Resaw with Feeder HB800
  • Table size: 45-1/4″ x 31-1/2″
  • Throat capacity: 30-5/8″
  • Height capacity: 15-3/8″
  • Comes with a feeder
$17,955
As low as $355.32/mo
View Details
Cantek 3 HP Single Phase 10” Tilt Arbor Table Saw TA10 at Elite Metal Tools
Cantek 3 HP Single Phase 10” Tilt Arbor Table Saw TA10
  • Table size: 36″x27″
  • Max. rip to right of blade: 50″
  • Max. depth of cut at 90°: 3″
  • Max. depth of cut at 45°: 2″
$3,045
As low as $98.96/mo
View Details
Cantek 5 HP Three Phase 5’ Sliding Table Saw with Scoring P30 at Elite Metal Tools
Cantek 5 HP Three Phase 5’ Sliding Table Saw with Scoring P30
  • Sliding table dimension: 63” x 12.4”
  • 5 HP Three Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
$9,345
As low as $303.71/mo
View Details
Cantek 5 HP Three Phase 10” Tilt Arbor Table Saw TA10 at Elite Metal Tools
Cantek 5 HP Three Phase 10” Tilt Arbor Table Saw TA10
  • Table size: 36″x27″
  • Max. rip to right of blade: 50″
  • Max. depth of cut at 90°: 3″
  • Max. depth of cut at 45°: 2″
$3,045
As low as $98.96/mo
View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.