Baileigh Industrial

  • 14" Blade
  • Variable speed, inverter driven with digital readout for rpm
  • Miters 45º Left & Right
  • 4.7" Round Tube Capacity at 90º
MSRP: $7,371.39
$5,999.99
As low as $194.99/mo
  • Actual Working Area: 96.5" x 50.5
  • Spindle: Air Cooled
  • Z Axis Stroke: 8"
  • Maximum Moving Speed (Inches Per Minute): 394
MSRP: $39,171.39
$30,795
As low as $609.43/mo
★★★★★
★★★★★
★★★★★
  • Roll Speed: 16 rpm
  • Upper Roll Dia.: 3"
  • Minimum Forming Dia.: 4.5"
  • Capacity (Mild Steel): 16 ga. (0.060")
MSRP: $6,793.99
$5,529.99
As low as $179.72/mo
  • Roll Speed: 16 rpm
  • Upper Roll Dia.: 3"
  • Minimum Forming Dia.: 4.5"
  • Capacity (Mild Steel): 16 ga. (0.060")
MSRP: $7,555.69
$6,149.99
As low as $199.87/mo
  • 220v 3 Phase
  • Air Cooled Spindle
  • Working Area 97" x 48"
  • Tool Diameters ER32
MSRP: $22,197.09
$16,999.99
As low as $336.42/mo
  • 10" Blade
  • Manual Feed
  • Mieters up to 45º left and right
  • 110V, 1PH
MSRP: $3,476.79
$2,829.99
As low as $91.97/mo
  • Table Size (Width) 18.5"
  • Swing 20"
  • Spindle MT4
  • Drill Capacity 1.25"
MSRP: $2,334.29
$1,925
As low as $62.56/mo
  • Table Size: 16.5" x 18.5"
  • Swing: 20"
  • Spindle Speeds: 12-220 to 3200 rpm
  • Distance from Spindle to Table: 26" 
MSRP: $2,297.39
$1,869.99
As low as $60.77/mo
  • 9" Blade
  • Manual Feed with Integrated Coolant System
  • Miters 45º left
  • 110V
MSRP: $2,309.69
$1,879.99
As low as $61.09/mo
  • Upper Roll Dia.: 3"
  • Minimum Forming Dia.: 4.5"
  • Wire Grooves: Yes
  • Capacity (Mild Steel): 16 ga. (0.060")
MSRP: $4,299.99
$3,499.99
As low as $113.74/mo
  • 12.5" Blade
  • Manual Feed
  • 4" Tube at 90º
  • 220V, 1PH
MSRP: $4,115.69
$3,349.99
As low as $108.87/mo
  • 11" Blade
  • Manual Feed
  • Miters up to 45º Left & Right
  • 110V, 1PH
MSRP: $3,783.99
$3,079.99
As low as $100.09/mo
  • 14" Blade
  • Miters 45º Left & Right with self centering vice
  • 220V, 3PH
  • 4.33" Round Tube Capacity at 90º
MSRP: $11,462.59
$8,999
As low as $292.46/mo
  • 110V
  • 1 HP
  • 15" Swing
  • .625" Drill Capacity
MSRP: $3,525.99
$2,845
As low as $92.46/mo
  • Maximum Load Capacity: 132 lbs.
  • Spindle Speeds: Variable
  • Drilling Capacity: 3/4" Mild Steel
  • Chuck Capacity: 0.03" - 0.625" (B16)
MSRP: $3,685.69
$2,945
As low as $95.71/mo
  • 41/4" Capacity
  • Pneumatic centering vise, hydraulic blade descent
  • Automatic shut-off and vise release
  • 220V, 3PH
MSRP: $19,288.59
$14,999
As low as $487.46/mo
  • 110V
  • 0.75 Horse Power
  • 11.8 Max Stock Width
  • 45 Degree Table Tilt
MSRP: $522.29
$499
  • Miters left and right 
  • Centering vise 
  • Cuts non-ferrous metals 
  • Blade turns at 3200 rpm
MSRP: $18,981.39
$14,759
As low as $479.66/mo
  • 220V Single Phase
  • 3 Horse Power
  • 2 Outlets
  • 4" Dust Collection Port
MSRP: $2,611.39
$2,175
As low as $70.68/mo

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

MSRP: $40,235.69
$31,495
As low as $623.28/mo
  • Motor Hp 1.5
  • Filter Type Four Stage (Stainless steel mesh - Aluminum mesh - Pre-pleated filter - HEPA filter)
  • Number of Filters 4
  • Filter Size Stainless steel mesh(21.8" x 11.6")- Aluminum mesh(21.25" x 17.25" x 7/8") - Pre-pleated filter(23.3" x 23.3" x 1.5") - HEPA filter(24" x 24" x 11.5")
  • Power 110V
MSRP: $8,980.79
$7,145
As low as $232.21/mo
  • Forming Width: 36"
  • Upper Roll Dia.: 2"
  • Minimum Forming Dia.: 3"
  • Wire Grooves: Yes
MSRP: $1,842.79
$1,520
As low as $49.40/mo
  • Maximum Load Capacity: 132 lbs.
  • Spindle Speeds: 5
  • Drilling Capacity: 3/4" Mild Steel
  • Swing: 16"
MSRP: $2,113.09
$1,719.99
As low as $55.89/mo
  • 3000 Rpm
  • 220V Single Phase
  • 3 Horse Power
  • 4" Dust Collection Port
MSRP: $3,003.09
$2,475
As low as $80.43/mo

Baileigh Industrial first arose in 1999 with cutting edge designs and materials that handle maximum capacities with ease. They are located in Manitowoc, Wisconsin along with other locations all around the world. They specialize in Metal Forming and shaping, Hydraulic benders made from heavy steel plates and Industrial grade hydraulics, and Heavy duty machines in manual and CNC configurations. They also produce Planers such as Helical Head Planers and Spiral Head Planers.

If you are in need of Heavy duty machines or Hydraulic benders or interested in Baileigh Industrials’ Planers please contact us. Here at Elite Metal Tools we offer low prices and one of a kind customer service.