Baileigh Industrial

• Spindle Speeds 8
• Spindle Travel 5"
• Spindle Speed Range 80, 140, 230, 350, 650, 1100, 1800, 2760 RPM
• T-Slot Width 5/8"

• Air Capacity: 1846 CFM
• Filter Type: Stainless Steel
• Number of Filters: 3
• Easily removable chip tray

• 14" Blade
• Variable speed, inverter driven with digital readout for rpm
• Miters 45º Left & Right
• 4.7" Round Tube Capacity at 90º

• 10" Blade
• Manual Feed
• Mieters up to 45º left and right
• 110V, 1PH

• Mitutoyo 2 Axis DRO - Standard
• Yaskawa Inverter Head
• Pneumatic Inverter Head
• Power Feed On X, Y, Z Axis

• Spindle Speeds 60 - 4,200RPM Infinitely Variable
• Distance from Spindle to Table 18.5"
• Spindle Travel 4.9"
• Spindle Speed Range 60 to 4200 RPM

• 3-Axis DRO - Standard
• NST 40 Spindle Taper
• Power Feed On X, Y, Z
• Turcity B® Coated Ways And Guides For Extreme Durability

• Mitutoyo 2 Axis DRO - Standard
• Yaskawa Inverter Head
• Pneumatic Power Draw Bar
• Power Feed On X, Y, X Axis

• 9" Blade
• Manual Feed with Integrated Coolant System
• Miters 45º left
• 110V

• 2HP Motor 
• Disc Diameter 20"
• Disc Speed 1100rpm
• 220V/1-phase Power 

• Mitutoyo 2 axis DRO - standard 
• Power feed on X, Y, and Z axis 
• Standard table and knee locks 
• Way covers and chip tray 

• Mitutoyo 2 axis DRO - standard 
• Power feed on X, Y, and Z axis 
• Standard table and knee locks
• Way covers and chip tray included 

• 12.5" Blade
• Manual Feed
• 4" Tube at 90º
• 220V, 1PH

• 59" x 22" Downdraft Table
• Dual Motors
• 1790 CFM Per Motor
• 110V

• Table Size 54" x 10"
• Spindle Center To Column Min Max 7.87" – 26.77"
• Spindle Diameter 3.93"
• Spindle Feed Per Rev .0015"/.003"/.006"

• 11" Blade
• Manual Feed
• Miters up to 45º Left & Right
• 110V, 1PH

• Table Adjustments Downward 45°
• Table Adjustments Upward 30°
• Disc Diameter 20"
• Disc Speed 1,100 rpm

• 80" x 24" Table Size
• Dual Motor
• 1950 CFM Per Motor
• 220V / 1 Phase

• 14" Blade
• Miters 45º Left & Right with self centering vice
• 220V, 3PH
• 4.33" Round Tube Capacity at 90º

• 2340 CFM
• HEPA Filter Standard
• Tool-Less Filter Maintenance
• CSA - U.S. Certified

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• 4HP Motor 
• 6691 fpm Belt Speed
• Pneumatic / Manual Power 
• Contact Wheel DiaxWidth 7.87"x3"