Baileigh Industrial

• 14" Blade
• Variable speed, inverter driven with digital readout for rpm
• Miters 45º Left & Right
• 4.7" Round Tube Capacity at 90º

• 10" Blade
• Manual Feed
• Mieters up to 45º left and right
• 110V, 1PH

• Variable-speed inverter-driven head
• 3-speed power down feed
• Auto reverse tapping feature
• Digital RPM readout

• Max. Drill Capacity: 2-1/2" (No.45 steel) & 2-7/8" (HT200 cast iron)
• Max. Tapping Capacity: 1-3/4" (No.45 steel) & 2" (HT200 cast iron)
• Distance from Spindle to Column Center: 13-3/4" to 63"
• Diameter of Column: 13.7"

• 9" Blade
• Manual Feed with Integrated Coolant System
• Miters 45º left
• 110V

• Spindle Speeds: Inverter Driven Variable
• Max. Drill Capacity: 1
• Tapping Capacity: 5/8"
• Drill Capacity Cast Iron: 1-1/16"

• 2" maximum drilling capacity
• Heavy duty construction
• Power down feed
• Large 63" column

• 1.57" maximum drilling capacity
• Heavy duty construction
• Power down feed
• 39.3" reach

• 12.5" Blade
• Manual Feed
• 4" Tube at 90º
• 220V, 1PH

• 1.5HP Motor 
• 5/8" Tapping Capacity 
• 1" Drill Capacity 
• 5.3" Spindle Travel 

• 11" Blade
• Manual Feed
• Miters up to 45º Left & Right
• 110V, 1PH

• Spindle Speed 150-3000rpm
• Spindle Travel 5.3" 
• Drill Capacity Steel 1" 
• Quill Diameter 2.44" 

• 2.95" Quill Diameter 
• Spindle Speed 85-2000rpm 
• 2HP Motor 
• 1.5" Drill Capacity 

• 14" Blade
• Miters 45º Left & Right with self centering vice
• 220V, 3PH
• 4.33" Round Tube Capacity at 90º

• 2 hp motor runs on 220-volt 3-phase power.
• 26-3/4” swing to tackle large pieces of material
• Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”
• Massive column and cast steel base reduce flexing even when you’re drilling at full capacity

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• 1/8HP Coolant Motor 
• 1.5" Drill Capacity 
• 85-4000rpm Spindle Speed
• Tapping Capacity 3/4" 

• 3.5HP Motor 
• 1.5" Drill Capacity 
• 108-1800rpm Spindle Speed
• 7.48" Spindle Travel 

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Spindle Taper MT3
• Table Slot .625"
• Tapping Capacity 1/2"
• Main Motor 2 hp

• 11" Blade
• Miter both ways, Stop Mechanism
• 23/4" Capacity
• Self centering vice

• Spindle Travel: 5.9"
• Quill Diameter: 2.44”
• Tapping Capacity: 5/8"
• Drill Capacity: 1.25"

• Pneumatic centering vise w/ Stock stop mechanism
• 41/4" Capacity
• 220V, 3PH
• 14" Blade