Baileigh Industrial

• Air Capacity: 1846 CFM
• Filter Type: Stainless Steel
• Number of Filters: 3
• Easily removable chip tray

• 14" Blade
• Variable speed, inverter driven with digital readout for rpm
• Miters 45º Left & Right
• 4.7" Round Tube Capacity at 90º

• 10" Blade
• Manual Feed
• Mieters up to 45º left and right
• 110V, 1PH

• Max. Drill Capacity: 2-1/2" (No.45 steel) & 2-7/8" (HT200 cast iron)
• Max. Tapping Capacity: 1-3/4" (No.45 steel) & 2" (HT200 cast iron)
• Distance from Spindle to Column Center: 13-3/4" to 63"
• Diameter of Column: 13.7"

• 2HP Motor 
• Disc Diameter 20"
• Disc Speed 1100rpm
• 220V/1-phase Power 

• Spindle Speeds: Inverter Driven Variable
• Max. Drill Capacity: 1
• Tapping Capacity: 5/8"
• Drill Capacity Cast Iron: 1-1/16"

• 9" Blade
• Manual Feed with Integrated Coolant System
• Miters 45º left
• 110V

• 2" maximum drilling capacity
• Heavy duty construction
• Power down feed
• Large 63" column

• 12.5" Blade
• Manual Feed
• 4" Tube at 90º
• 220V, 1PH

• 1.57" maximum drilling capacity
• Heavy duty construction
• Power down feed
• 39.3" reach

• 59" x 22" Downdraft Table
• Dual Motors
• 1790 CFM Per Motor
• 110V

• 1.5HP Motor 
• 5/8" Tapping Capacity 
• 1" Drill Capacity 
• 5.3" Spindle Travel 

• Spindle Speed 150-3000rpm
• Spindle Travel 5.3" 
• Drill Capacity Steel 1" 
• Quill Diameter 2.44" 

• 11" Blade
• Manual Feed
• Miters up to 45º Left & Right
• 110V, 1PH

• Table Adjustments Downward 45°
• Table Adjustments Upward 30°
• Disc Diameter 20"
• Disc Speed 1,100 rpm

• Variable-speed inverter-driven head
• 3-speed power down feed
• Auto reverse tapping feature
• Digital RPM readout

• 2.95" Quill Diameter 
• Spindle Speed 85-2000rpm 
• 2HP Motor 
• 1.5" Drill Capacity 

• 80" x 24" Table Size
• Dual Motor
• 1950 CFM Per Motor
• 220V / 1 Phase

• 2 hp motor runs on 220-volt 3-phase power.
• 26-3/4” swing to tackle large pieces of material
• Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”
• Massive column and cast steel base reduce flexing even when you’re drilling at full capacity

• 14" Blade
• Miters 45º Left & Right with self centering vice
• 220V, 3PH
• 4.33" Round Tube Capacity at 90º

• 2340 CFM
• HEPA Filter Standard
• Tool-Less Filter Maintenance
• CSA - U.S. Certified

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.