Baileigh Industrial

• 1450 CFM
• 220V Single Phase
• 2 Horse Power
• 6"x4" Dust Collection Port

• 2 HP Motor
• 110/220V 1PH
• Table Size 20"
• 10" Blade

• Drill Capacity .7"
• Spindle Travel 3.1"
• Column Diameter 2.8"
• Power 110V

• Maximum Depth of Cut (Resaw): 1/8"
• Cutter Head Diameter: 3"
• Max Stock Width: 15'
• Minimum Stock Thickness: 3/16"

• 110V
• 1 HP
• 15" Swing
• .625" Drill Capacity

• Maximum Load Capacity: 132 lbs.
• Spindle Speeds: 5
• Drilling Capacity: 3/4" Mild Steel
• Swing: 16"

• Z Axis Stroke 8"
• Maximum Moving Speed (Inches Per Minute) 2362
• Maximum Engraving Speed (Inches Per Minute) 984
• Reposition Accuracy 0.0015

• 220V Single Phase 
• 10 Horse Power
• 5000 Rpm
• 20 to 30 Fpm

• Maximum Rabbeting Capacity: 1/2"
• Cutter Head Diameter: 3-1/4"
• Max Stock Width: 8"
• Jointer Maximum Cutting Depth: 1/8"

• 110V
• 1 Horse Power
• 1400 Rpm
• 12" Swing

• 14" Blade
• Miters 45º Left & Right with self centering vice
• 220V, 3PH
• 4.33" Round Tube Capacity at 90º

• Table Size (Width) 8"
• Fence Size 4-3/8" x 19-5/8"
• Cutter Head Diameter 2"
• Max Stock Width 8"

• 220V Single Phase
• 3 Horse Power
• 2 Outlets
• 4" Dust Collection Port

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• Table Size (Width) 12"
• RPM 5500
• Fence Size 5.5" x 60"
• Maximum Rabbeting Capacity 3/4"

• 110V
• 0.75 Horse Power
• 11.8 Max Stock Width
• 45 Degree Table Tilt

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

• Speeds 2625 fpm
• Belt/Blade Size 37" x 75"
• Max Stock Width 36.5"
• Maximum Stock Height 6"

• 3000 Rpm
• 220V Single Phase
• 3 Horse Power
• 4" Dust Collection Port

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Speeds 2625 fpm
• Belt/Blade Size 25" x 75"
• Max Stock Width 24"
• Maximum Stock Height 6"

• Maximum Depth of Cut (Resaw): 2"
• AMP Draw: 15
• Throat Capacity (IN): 22.375"
• Pieces Included: Material hold down, Onboard Dust Blower, Foot Pedal Operation Switch

• 600 CFM
• 110V
• 1.5 Hp
• 6"x4" Dust Collection Port

• Table Saw RPM: 4200
• Cut Capacity at 45° Miter (In.): 12 x 1-9/16 (L), 12 x 1 (R)
• Cut Capacity at 90° (In.): 0°, 33.9°, and 45° (L/R)
• Miter Capacity (Deg.): 52° L, 60° R