Baileigh Industrial

• Spindle Speeds 8
• Spindle Travel 5"
• Spindle Speed Range 80, 140, 230, 350, 650, 1100, 1800, 2760 RPM
• T-Slot Width 5/8"

• 14" Blade
• Variable speed, inverter driven with digital readout for rpm
• Miters 45º Left & Right
• 4.7" Round Tube Capacity at 90º

• 10" Blade
• Manual Feed
• Mieters up to 45º left and right
• 110V, 1PH

• Mitutoyo 2 Axis DRO - Standard
• Yaskawa Inverter Head
• Pneumatic Inverter Head
• Power Feed On X, Y, Z Axis

• Spindle Speeds 60 - 4,200RPM Infinitely Variable
• Distance from Spindle to Table 18.5"
• Spindle Travel 4.9"
• Spindle Speed Range 60 to 4200 RPM

• 3-Axis DRO - Standard
• NST 40 Spindle Taper
• Power Feed On X, Y, Z
• Turcity B® Coated Ways And Guides For Extreme Durability

• Mitutoyo 2 Axis DRO - Standard
• Yaskawa Inverter Head
• Pneumatic Power Draw Bar
• Power Feed On X, Y, X Axis

• 9" Blade
• Manual Feed with Integrated Coolant System
• Miters 45º left
• 110V

• Mitutoyo 2 axis DRO - standard 
• Power feed on X, Y, and Z axis 
• Standard table and knee locks 
• Way covers and chip tray 

• Mitutoyo 2 axis DRO - standard 
• Power feed on X, Y, and Z axis 
• Standard table and knee locks
• Way covers and chip tray included 

• Mild Steel Capacity 16 ga.
• Aluminum Capacity 12 ga.
• Speed 0 – 1500 beats / minute
• Throat Depth 19"

• 5 HP Motor
• 16 ga. Mild Steel Capacity
• Quick Release Lower Die Anvil
• A do it all machine

• 12.5" Blade
• Manual Feed
• 4" Tube at 90º
• 220V, 1PH

• Throat Depth 28"
• Aluminum Capacity 14 ga.
• Mild Steel Capacity 16 ga.
• Power 80 - 120 psi

• Table Size 54" x 10"
• Spindle Center To Column Min Max 7.87" – 26.77"
• Spindle Diameter 3.93"
• Spindle Feed Per Rev .0015"/.003"/.006"

• 11" Blade
• Manual Feed
• Miters up to 45º Left & Right
• 110V, 1PH

• Mild Steel Capacity: 16 ga.
• Tooling Height Adjustment: 1-1/2"
• Aluminum Capacity: 14 ga.
• Power: 90 - 120 Psi.

• 16 gauge mild steel capacity
• Air operation
• Includes filter, oiler and foot pedal
• Includes 7 radius dies, flat, 2", 3", 6", 8", 12" and 24"

• 14" Blade
• Miters 45º Left & Right with self centering vice
• 220V, 3PH
• 4.33" Round Tube Capacity at 90º

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

• Mild Steel Capacity: 16 ga.
• Aluminum Capacity: 14 ga.
• Tooling Height Adjustment: 11"
• Throat Depth: 24" adjustable

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Operater Controls Beats Per Minute From 0 - 1700
• It has the ability to shrink, stretch, dome, edge turn, bead, and offset
• 19" Deep Throat
• Quick Release Bottom Tooling Holder