Baileigh Industrial

• Spindle Speeds 8
• Spindle Travel 5"
• Spindle Speed Range 80, 140, 230, 350, 650, 1100, 1800, 2760 RPM
• T-Slot Width 5/8"

• 14" Blade
• Variable speed, inverter driven with digital readout for rpm
• Miters 45º Left & Right
• 4.7" Round Tube Capacity at 90º

• 10" Blade
• Manual Feed
• Mieters up to 45º left and right
• 110V, 1PH

• Mitutoyo 2 Axis DRO - Standard
• Yaskawa Inverter Head
• Pneumatic Inverter Head
• Power Feed On X, Y, Z Axis

• Spindle Speeds 60 - 4,200RPM Infinitely Variable
• Distance from Spindle to Table 18.5"
• Spindle Travel 4.9"
• Spindle Speed Range 60 to 4200 RPM

• 3-Axis DRO - Standard
• NST 40 Spindle Taper
• Power Feed On X, Y, Z
• Turcity B® Coated Ways And Guides For Extreme Durability

• Mitutoyo 2 Axis DRO - Standard
• Yaskawa Inverter Head
• Pneumatic Power Draw Bar
• Power Feed On X, Y, X Axis

• 9" Blade
• Manual Feed with Integrated Coolant System
• Miters 45º left
• 110V

• Mitutoyo 2 axis DRO - standard 
• Power feed on X, Y, and Z axis 
• Standard table and knee locks 
• Way covers and chip tray 

• Mitutoyo 2 axis DRO - standard 
• Power feed on X, Y, and Z axis 
• Standard table and knee locks
• Way covers and chip tray included 

• 12.5" Blade
• Manual Feed
• 4" Tube at 90º
• 220V, 1PH

• Table Size 54" x 10"
• Spindle Center To Column Min Max 7.87" – 26.77"
• Spindle Diameter 3.93"
• Spindle Feed Per Rev .0015"/.003"/.006"

• 11" Blade
• Manual Feed
• Miters up to 45º Left & Right
• 110V, 1PH

• 14" Blade
• Miters 45º Left & Right with self centering vice
• 220V, 3PH
• 4.33" Round Tube Capacity at 90º

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Pneumatic centering vise w/ Stock stop mechanism
• 41/4" Capacity
• 220V, 3PH
• 14" Blade

• 11" Blade
• Miter both ways, Stop Mechanism
• 23/4" Capacity
• Self centering vice

• Cuts Non-ferrous metals - Blade turns at 3200 rpm
• 41/4" Capacity
• Miters left and right
• 220V, 3PH

• 11" Blade
• Semi-Automatic operation - manual feed also available
• Self centering vice
• 2.75" Tube Capacity 

• Accepts Up To 17" Blade
• Semi-Automatic Operation
• Dual Miter Swivel Head
• Tool Gap Compensation Device