Baileigh Industrial

• 7.5 hp motor with 4 speeds: 3,000, 4,000, 5,000, and 6,000 rpm.
• Set the RPM by manually moving the belts to different gears.
• Digital readout (DRO) shows the blade speed to help with repeatability.
• Comes standard with a 12” blade, but accepts up to a huge 16” blade.

• 12" Blade
• 3600 RPM
• Maximum rip cut (right) 52"
• 220V, 1PH

• Pipe Capacity: 1.5" (sch. 40) / Min. Dia.: 28"
• Round Tube Capacity: 2" (0.078") / Min. Dia.: 27.55"
• Square Tube Capacity: 1.5" (0.078") / Min. Dia.: 39"
• Solid Round Capacity: 1.375" / Min. Dia.: 24"

3 HP
4300 RPM
220 V 1PH
5/8" Saw Harbo

• 3.5 HP Motor
• 3 Driven Rolls
• Pipe Capacity: Size: 2.5" (sch. 40) / Min. Dia.: 48"
• 220V Single Phase

• Pipe Capacity: 1" (sch. 40) / Min. Dia.: 28"
• Round Tube Capacity: 1.25" (0.078") / Min. Dia.: 31.5"
• Square Tube Capacity: 1.25" (0.078") / Min. Dia.: 35"
• Solid Round Capacity: 0.875" / Min. Dia. 20"

• Inverter Driven 
• Variable Speed 
• Vertical And Horizontal Bending 
• Foot Pedal Controlled 

• Motor Hp 2
• Roll Adjustment Manual
• Pipe Capacity Size: 1" (sch. 40) / Min. Dia.: 28"
• Round Tube Capacity Size: 1.25" (.078") / Min. Dia.: 31.5"

• 72" Forming Width
• 9- Gauge Mild Steel Capacity
• 3 Driven Rolls
• Hydraulic Back Roll

• Hydraulic Adjustment Of Top Roll 
• Inverter Driven 
• Varible Speed
• Digital Readout

• 4' Rolling Width
• Roll up to 3 gauge (1/4" mild sheet steel)
• Digital readout
• 3 HP

• 12-14" Blade
• 3000 - 5000 RPM
• 15' x 125" sliding table
• 220V, 3PH

• Overload Protected 
• Hydraulic Lateral Angle Guides 
• Three Driven Rolls 
• Many Optional Tooling Sets Available 

• 110/220V 1 PH (Prewired 110V)
• 1.75 Horse Power
• Maximum Rip Cut (Right) 36"
• 4000 RPM

• Roll Speed: 6 rpm
• Upper Roll Dia.: 3.50"
• Minimum Forming Dia.: 5.25"
• Capacity (Mild Steel): 14 ga. (0.075")

• 48" Forming Width
• 13-Gauge Mild Steel Capacity
• 3 Driven Rolls
• Foot Pedal Operated

• Full CNC control 
• 40 programs 24 bends per program - standard 
• Hydraulic top roll 
• Many optional tooling sets available 

• 5 HP
• 3600 RPM
• 1" Table Harbor
• 220V 1 PH

• Three Driven Rolls 
• Inverter Driven 
• Variable Speed 
• Vertical And Horizontal Bending 

• 220V, 1PH Motor
• 4300 RPM
• 3HP
• 10" Blade

• 220V 1 PH
• Table Saw 3850
• Table Size 20"
• Blade Diameter 10"

• Driven Rolls 2
• Roll Adjustment Manual
• Pipe Capacity Size: .5” (sch.40) / Min. Dia.: 14”
• Round Tube Capacity Size: 1" (.0625") Min. Dia.: 16"

• 220 V 3 PH
• 7.5 HP
• Table Saw Arbor 1"
• RPM 3000/4000/5000

• Hydraulic Adjustments 
• Vertical And Horizontal Bender 
• Foot Pedal Controlled 
• Digital Readout