Baileigh Industrial

• Z Axis Stroke 8"
• Maximum Moving Speed (Inches Per Minute) 2362
• Maximum Engraving Speed (Inches Per Minute) 984
• Reposition Accuracy 0.0015

• 220V Single Phase 
• 10 Horse Power
• 5000 Rpm
• 20 to 30 Fpm

• Maximum Load Capacity: 132 lbs.
• Spindle Speeds: 5
• Drilling Capacity: 3/4" Mild Steel
• Swing: 16"

• Maximum Rabbeting Capacity: 1/2"
• Cutter Head Diameter: 3-1/4"
• Max Stock Width: 8"
• Jointer Maximum Cutting Depth: 1/8"

• 110V
• 1 Horse Power
• 1400 Rpm
• 12" Swing

• Table Size (Width) 8"
• Fence Size 4-3/8" x 19-5/8"
• Cutter Head Diameter 2"
• Max Stock Width 8"

• 220V Single Phase
• 3 Horse Power
• 2 Outlets
• 4" Dust Collection Port

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• Table Size (Width) 12"
• RPM 5500
• Fence Size 5.5" x 60"
• Maximum Rabbeting Capacity 3/4"

• 110V
• 0.75 Horse Power
• 11.8 Max Stock Width
• 45 Degree Table Tilt

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

• Speeds 2625 fpm
• Belt/Blade Size 37" x 75"
• Max Stock Width 36.5"
• Maximum Stock Height 6"

• 3000 Rpm
• 220V Single Phase
• 3 Horse Power
• 4" Dust Collection Port

• Table Saw RPM: 4200
• Cut Capacity at 45° Miter (In.): 12 x 1-9/16 (L), 12 x 1 (R)
• Cut Capacity at 90° (In.): 0°, 33.9°, and 45° (L/R)
• Miter Capacity (Deg.): 52° L, 60° R

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Maximum Depth of Cut (Resaw): 2"
• AMP Draw: 15
• Throat Capacity (IN): 22.375"
• Pieces Included: Material hold down, Onboard Dust Blower, Foot Pedal Operation Switch

• 600 CFM
• 110V
• 1.5 Hp
• 6"x4" Dust Collection Port

• Speeds 2625 fpm
• Belt/Blade Size 25" x 75"
• Max Stock Width 24"
• Maximum Stock Height 6"

• Swing 15"
• Spindle MT2
• Drill Capacity 0.7"
• Spindle Travel 3.1"

• Maximum Rabbeting Capacity: 1/2"
• Cutter Head Diameter: 3-1/4"
• Max Stock Width: 8"
• Jointer Maximum Cutting Depth: 1/8"

• Motor Hp 1.5
• Filter Type Four Stage (Stainless steel mesh - Aluminum mesh - Pre-pleated filter - HEPA filter)
• Number of Filters 4
• Filter Size Stainless steel mesh(21.8" x 11.6")- Aluminum mesh(21.25" x 17.25" x 7/8") - Pre-pleated filter(23.3" x 23.3" x 1.5") - HEPA filter(24" x 24" x 11.5")
• Power 110V

• Table Saw RPM: 4200
• Cut Capacity at 45° Miter (In.): 14" x 2" (L), 14" x 1-3/8" (R)
• Cut Capacity at 90° (In.): 14" x 4"
• Miter Capacity (Deg.): 52° L, 60° R

• 220V Single Phase
• 5 Horse Power
• 3600/5100/8000/10000 RPM
• 4" Dust Collection Port

• 110V
• 1 Horse Power
• 4" Dust Collection Port
• 1725 Rpm