Baileigh Industrial

• 7.5 hp motor with 4 speeds: 3,000, 4,000, 5,000, and 6,000 rpm.
• Set the RPM by manually moving the belts to different gears.
• Digital readout (DRO) shows the blade speed to help with repeatability.
• Comes standard with a 12” blade, but accepts up to a huge 16” blade.

• 12" Blade
• 3600 RPM
• Maximum rip cut (right) 52"
• 220V, 1PH

3 HP
4300 RPM
220 V 1PH
5/8" Saw Harbo

• Combination Shear, Sheet Metal Brake, And Slip Roll
• 52" Forming Width
• 16-Gauge Mild Steel Capacity
• Segmented Fingers On Brake

• Combination Shear, Sheet Metal Brake and Slip Roll
• 52" Forming Width
• 20-Gauge Mild Steel Capacity
• Segmented Fingers On Brake

• 70 tons
• Open Design C-frame press
• Perfect for pressing or straightening 
• Fully welded construction

• High-Carbon, High-Chromium Blades
• Front and Back Gauges
• Front Support Arms With Squaring Bar
• Automatic and Single-Stroke Operations With Jog Mode

• Back Gauge Length: 24"
• Thickness (SS): 14 ga. (18 ga.)
• Strokes Per Minute: 35
• Front Gauge Length: 24"

• 12-14" Blade
• 3000 - 5000 RPM
• 15' x 125" sliding table
• 220V, 3PH

• 110/220V 1 PH (Prewired 110V)
• 1.75 Horse Power
• Maximum Rip Cut (Right) 36"
• 4000 RPM

• 52" x 10-Gauge Mild Steel Capacity
• Back and Side Gauges
• Hydraulic
• 220V / 1PH

• Back Gauge Length: 33"
• Thickness (SS): 16 ga. (20 ga.)
• Front Gauge Length: 20"
• Blade Angle: 1°

• Back Gauge Length: 24"
• Thickness (SS): 16 ga. (20 ga.)
• Working Height: 32"
• Front Gauge Length: 24"

• 5 HP
• 3600 RPM
• 1" Table Harbor
• 220V 1 PH

• 120" x 10-Gauge Mild Steel Capacity
• Front and Back Gauges
• Hydraulic Operations
• 220V / 3-Phase Motor

• 220V, 1PH Motor
• 4300 RPM
• 3HP
• 10" Blade

• 220V 1 PH
• Table Saw 3850
• Table Size 20"
• Blade Diameter 10"

• High-Carbon, High-Chromium Blades
• Front and Back Gauges
• Front Support Arms With Squaring Bar
• 26 Strokes Per Minute

• High-Carbon, High-Chromium Blades
• Front and Back Gauges
• Front Support Arms With Squaring Bar
• Automatic And Single Stroke Operations With Jog Mode

• Rolling Capacity: 20 ga. (0.036”)
• Shear Capacity: 20 ga. (0.036”)
• Bending Capacity: 20 ga. (0.036”)
• Finger Lengths: 1", 2-1/8", 3-1/8", 6", 8", 10-1/8"

• Rolling Capacity: 20 ga. (0.036”)
• Shear Capacity: 20 ga. (0.036”)
• Min. Rolling Dia.: 1.70”
• Bending Capacity: 20 ga. (0.036”)

• 60" x 14-Gauge Mild Steel Capacity
• Back and Side Gauges
• Hydraulic Operation
• 220V, 3-Phase

• Built For Years and Years of Production
• 7.5 HP Motor
• Jog, Single or Continuous Cutting Modes
• Side Gauges

• 220 V 3 PH
• 7.5 HP
• Table Saw Arbor 1"
• RPM 3000/4000/5000