Baileigh Industrial

• 14" Blade
• Variable speed, inverter driven with digital readout for rpm
• Miters 45º Left & Right
• 4.7" Round Tube Capacity at 90º

• Working Table Size: 60” x 100”
• Z Axis Travel: 3.4”
• Table Load Capacity: 1" Mild Steel @ 48” x 96”
• Drive: Stepper Motor

• 10" Blade
• Manual Feed
• Mieters up to 45º left and right
• 110V, 1PH

• 59" x 59" working area.
• BobCAD-Cam Express programming software Included
• Travel Speed: 315 Inches Per Minute
• Table Height: 19.6”

• Max. Drill Capacity: 2-1/2" (No.45 steel) & 2-7/8" (HT200 cast iron)
• Max. Tapping Capacity: 1-3/4" (No.45 steel) & 2" (HT200 cast iron)
• Distance from Spindle to Column Center: 13-3/4" to 63"
• Diameter of Column: 13.7"

• Spindle Speeds: Inverter Driven Variable
• Max. Drill Capacity: 1
• Tapping Capacity: 5/8"
• Drill Capacity Cast Iron: 1-1/16"

• Travel Speed 315 Inches Per Minute
• Table Dimensions 60" x 140"
• Table Load Capacity 1" Mild Steel
• Capacity Depends on Plasma System Chosen

• 9" Blade
• Manual Feed with Integrated Coolant System
• Miters 45º left
• 110V

• 2" maximum drilling capacity
• Heavy duty construction
• Power down feed
• Large 63" column

• 12.5" Blade
• Manual Feed
• 4" Tube at 90º
• 220V, 1PH

• 1.57" maximum drilling capacity
• Heavy duty construction
• Power down feed
• 39.3" reach

• Table Dimensions 29" x 31"
• Speed Number Infinite
• Table Load Capacity 3/4" Mild Steel
• Capacity Depends on Plasma System Chosen

• 1.5HP Motor 
• 5/8" Tapping Capacity 
• 1" Drill Capacity 
• 5.3" Spindle Travel 

• Spindle Speed 150-3000rpm
• Spindle Travel 5.3" 
• Drill Capacity Steel 1" 
• Quill Diameter 2.44" 

• 11" Blade
• Manual Feed
• Miters up to 45º Left & Right
• 110V, 1PH

• Travel Speed: 315 Inches Per Minute
• Table Load Capacity: 1" Mild Steel
• Capacity: Depends on Plasma System Chosen
• Drive: Servo Motor

• Variable-speed inverter-driven head
• 3-speed power down feed
• Auto reverse tapping feature
• Digital RPM readout

• 2.95" Quill Diameter 
• Spindle Speed 85-2000rpm 
• 2HP Motor 
• 1.5" Drill Capacity 

• 2 hp motor runs on 220-volt 3-phase power.
• 26-3/4” swing to tackle large pieces of material
• Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”
• Massive column and cast steel base reduce flexing even when you’re drilling at full capacity

• 14" Blade
• Miters 45º Left & Right with self centering vice
• 220V, 3PH
• 4.33" Round Tube Capacity at 90º

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• 3.5HP Motor 
• 1.5" Drill Capacity 
• 108-1800rpm Spindle Speed
• 7.48" Spindle Travel