Baileigh Industrial

• 7.5 hp motor with 4 speeds: 3,000, 4,000, 5,000, and 6,000 rpm.
• Set the RPM by manually moving the belts to different gears.
• Digital readout (DRO) shows the blade speed to help with repeatability.
• Comes standard with a 12” blade, but accepts up to a huge 16” blade.

• 12" Blade
• 3600 RPM
• Maximum rip cut (right) 52"
• 220V, 1PH

3 HP
4300 RPM
220 V 1PH
5/8" Saw Harbo

• 2111 CFM
• 220V Single Phase
• 3 hp
• 8"x4" Dust Collection Port

• 6000 CFM
• 10HP
• 5 Ports
• 2 Drums - 63 Gallons Each

• 12-14" Blade
• 3000 - 5000 RPM
• 15' x 125" sliding table
• 220V, 3PH

• 110/220V 1 PH (Prewired 110V)
• 1.75 Horse Power
• Maximum Rip Cut (Right) 36"
• 4000 RPM

• 5 HP
• 3600 RPM
• 1" Table Harbor
• 220V 1 PH

• 220V, 1PH Motor
• 4300 RPM
• 3HP
• 10" Blade

• 220V 1 PH
• Table Saw 3850
• Table Size 20"
• Blade Diameter 10"

• 5HP Motor
• 3600 CFM
• Automatic Filter Cleaner
• 3 Dust Ports

• 220 V 3 PH
• 7.5 HP
• Table Saw Arbor 1"
• RPM 3000/4000/5000

• 1450 CFM
• 220V Single Phase
• 2 Horse Power
• 6"x4" Dust Collection Port

• 2 HP Motor
• 110/220V 1PH
• Table Size 20"
• 10" Blade

• 600 CFM
• 110V
• 1.5 Hp
• 6"x4" Dust Collection Port

• Motor Hp 1.5
• Filter Type Four Stage (Stainless steel mesh - Aluminum mesh - Pre-pleated filter - HEPA filter)
• Number of Filters 4
• Filter Size Stainless steel mesh(21.8" x 11.6")- Aluminum mesh(21.25" x 17.25" x 7/8") - Pre-pleated filter(23.3" x 23.3" x 1.5") - HEPA filter(24" x 24" x 11.5")
• Power 110V

• 2300 CFM
• 220V Single Phase
• 3 Hp
• 8"x4" Dust Collection Port

• 110V
• 2 Hp
• 1650 CFM
• 6"x4" Dust Collection Port

• 1300 CFM
• 110V
• 1.5 hp
• 6"x4" Dust Collection Port