Combination Jointers/Planers

  • Cast iron head
  • Cast iron table with extensions creates a big 55-1/2" x 20" working area
  • Chip breaker and pressure bar assists to reduce snipe
  • Chrome-plated, ergonomic handwheel makes adjustments smooth and easy
  • Cutterhead contains 4 high speed steel straight knives for a clean, smooth cut
$5,331.99
$4,339.99
  • Cast iron head
  • Cast iron table with extensions creates a big 55-1/2" x 20" working area
  • Chip breaker and pressure bar assists to reduce snipe
  • Chrome-plated, ergonomic handwheel makes adjustments smooth and easy
  • Feed rollers and cutterhead supported by full cast iron head assembly
$7,223.99
$5,879.99
  • 3" diameter infeed and outfeed rollers are supported by four large needle bearings for long life
  • Adjustable table
  • Massive gear box maintains positive feed by using a large chain drive with automatic tensioners to power infeed and outfeed rollers
  • Quick-Set micro-adjustable lever easily raises and lowers table rollers from 0" to 0.050" at a touch
  • Solid pressure bar has wide foot for long wear and can be adjusted on both ends for precise feeding
$22,237.13
$18,099.99
  • Angled dust chute with 4" port positions collection hose away from the work area while providing efficient chip and dust collection
  • Large cast iron handwheel positions table quickly and easily
  • Large, precision ground cast iron table and extensions provide maximum workpiece support
  • Lockable built-in caster system allows for mobility in the shop
  • Steel top-mounted return rollers speed repetitive cuts
$5,307.41
$4,319.99
  • 2 feed speeds - 20/30 fpm - accommodates rough and fine finish work
  • Adjustable bed rollers allow smooth feeding of rough or finished workpieces
  • All cast iron construction, the heavy cast iron table travels on two large lead screws
  • Cast iron construction
  • Dust chute with 5" port for dust collection
$9,779.41
$7,959.99
  • 2 feed speeds - 20/30 fpm - accommodates rough and fine finish work
  • Adjustable bed rollers allow smooth feeding of rough or finished workpieces
  • All cast iron construction, the heavy cast iron table travels on two large lead screws
  • Cast iron construction
  • Dust chute with 5" port for dust collection
$13,170.27
$10,719.99
  • 2 feed speeds - 20/30 fpm - accommodates rough and fine finish work
  • Adjustable bed rollers allow smooth feeding of rough or finished workpieces
  • All cast iron construction, the heavy cast iron table travels on two large lead screws
  • Cast iron construction
  • Dust chute with 5" port for dust collection
$13,170.27
$10,719.99
  • 460V operation requires an additional 460V magnetic switch: 209-5016G
  • Cast iron head
  • Cast iron table with extensions creates a big 55-1/2" x 20" working area
  • Chip breaker and pressure bar assists to reduce snipe
  • Chrome-plated, ergonomic handwheel makes adjustments smooth and easy
$7,223.99
$5,879.99
  • Helical cutterhead with 42 two sided carbide inserts for fast knife changes with no adjustments and a quiet clean cut
  • Large 12" x 84" precision ground cast iron table surface for heavy-duty work
  • Parallelogram design for close table-to-cutterhead proximity and fast depth of cut adjustments
  • Rack and pinion adjustable cast iron fence assembly for smooth fence positioning without play
  • Table "lips" on both sides of cutterhead aid in noise reduction
$10,614.84
$8,639.99
  • High-mount switch for operator convenience
  • Large 8" x 82" precision ground cast iron table surface for heavy-duty work
  • Parallelogram design allows for easy and accurate adjustment of tables
  • Parallelogram design for close table-to-cutterhead proximity and fast depth of cut adjustments
  • Patented handwheel with worm gear system for precise fence tilting
$5,430.27
$4,419.99
  • Cast iron fence bevel controls with positive stops at 45 degrees and 90 degrees
  • Full size rabbeting table supports large workpieces for rabbets up to 3/4" deep
  • Helical cutterhead with 58 two-sided knife inserts reduces noise, eliminates adjustments, and speeds knife change
  • Large 16" x 96" precision ground cast iron table surface for maximum support and fine finish
  • Parallelogram construction maintains close table-to-cutterhead proximity and ensures table parallelism
$13,551.13
$11,029.99
  • 460V operation requires an additional 460V magnetic switch: 209-5016G
  • Cast iron head
  • Cast iron table with extensions creates a big 55-1/2" x 20" working area
  • Chip breaker and pressure bar assists to reduce snipe
  • Chrome-plated, ergonomic handwheel makes adjustments smooth and easy
$5,331.99
$4,339.99
  • Large 12" x 84" precision ground cast iron table surface for heavy-duty work
  • Parallelogram design for close table-to-cutterhead proximity and fast depth of cut adjustments
  • Rack and pinion adjustable cast iron fence assembly for smooth fence positioning without play
  • Straight knife cutterhead with 3 high speed steel knives create a clean cut
  • Table "lips" on both sides of cutterhead aid in noise reduction
$8,808.84
$7,169.99
  • Helical cutterhead with 42 two sided carbide inserts for fast knife changes with no adjustments and a quiet clean cut
  • Large 12" x 84" precision ground cast iron table surface for heavy-duty work
  • Parallelogram design for close table-to-cutterhead proximity and fast depth of cut adjustments
  • Rack and pinion adjustable cast iron fence assembly for smooth fence positioning without play
  • Table "lips" on both sides of cutterhead aid in noise reduction
$10,614.84
$8,639.99
  • Adjustment lever offers quick infeed table positioning and fine-tuning of cut depth
  • Extra long tables are mounted on dovetailed ways for extended workpiece support
  • Handwheel operated worm gear system for smooth fence tilting
  • High mount switch for operator convenience
  • Magnetic push blocks can be stored on the machine within constant reach
$3,390.84
$2,759.99
  • 66" long adjustable infeed and outfeed tables provide more working surface
  • Built-in ledge for 1/2" rabbeting capacity
  • Enlarged sheet metal stand provides a sturdy base
  • Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts
  • Fence controls are center mounted for convenience
$2,174.56
$1,791.00
  • Adjustment lever offers quick infeed table positioning and fine-tuning of cut depth
  • Extra long tables are mounted on dovetailed ways for extended workpiece support
  • Handwheel operated worm gear system for smooth fence tilting
  • High mount switch for operator convenience
  • Magnetic push blocks can be stored on the machine within constant reach
$4,066.56
$3,328.00
  • 66" long adjustable infeed and outfeed tables provide more working surface
  • Enlarged sheet metal stand provides a sturdy base
  • Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts
  • Fence controls are center mounted for convenience
  • Fine/quick adjustment lever on infeed table for precision cuts
$2,813.41
$2,300.00
  • High-mount switch for operator convenience
  • Large 8" x 82" precision ground cast iron table surface for heavy-duty work
  • Parallelogram design allows for easy and accurate adjustment of tables
  • Parallelogram design for close table-to-cutterhead proximity and fast depth of cut adjustments
  • Patented handwheel with worm gear system for precise fence tilting
$4,607.13
$3,749.99