Manufacturer Part: | EMT ID: |
156243
|
10602
|
- Full Up & Down Stroke Control
- Bar Shear set at 2 degrees of rake
- Motor: 5 HP, 220 Volt, 3 Phase
- Made In The USA
Description
In building the 5624 Uni-Hydro Chuck Dvorak took up his own challenge to design a 1/2” x 24” flat bar shear that could achieve virtually perfect shearing, with a blade rake as close to zero degrees as possible. The result was the Uni-Hydro Model 5624, featuring a 2 degree low rake blade and the highest quality shear for any hydraulic ironworker that has ever been produced. No other hydraulic ironworker can match the 5624’s capability of shearing 1/2” x 24” on 2 degrees of rake, with such minimal distortion over 24”. This machine will do great in small fab, farm and sheet metal shops.
Uni-hydro machines are made in the USA, not assembled from imported parts. All their machines are built from the ground up at their factory in Cosmos, MN.
Features
- Manual Punch Aligner
- 9″ Open Throat Punch with 56-ton capability
- 24″ Bar Shear with Four Sided Blades, with 2 degrees of rake
- Bar Shear Hold-Down can be Fixed or Adjustable
- Full Up & Down Stroke Control
- Built for Forklift Handling
- Magnetic Starter for Safety & Reliability
Specifications
- Model: 5624
- Tonnage: 56
- Throat Depth: 9"
- Punch:
- 1-3/8" hole in 1/2" mild steel
- 2-1/4" hole in 5/16" mild steel
- Bar Shear:
- 1/2" x 24"
- Angle Shear 90°:
- Slug Type - 6" x 6" x 3/8"
- Sever Cut - 4" x 4" x 3/8"
- Miter Angle 45°:
- Bar Shear - 4" x 4" x 3/8"
- Slug Type - 4" x 4" x 3/8"
- Rod Shear:
- Round (Max) - 1-1/4"
- Square (Max) - 1-1/4”
- V Coper Notcher 90°: For 4" x 4" x 3/8" Angle Iron
- Square Notcher: 3" x 3" x 3/8" - Punch/Power Cavity
- Pipe Notcher (Sch 40 or 80): 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4”, 2"
- Brake: 6", 9”, 14”, 18”, 24” capacity
- Channel Shear: 2" & 3" combined or 4" standard
- Strokes Per Min:
- Light Material - 50
- Max Capacity - 9
- Hydraulics: 2,000 psi
- Oil Capacity: 16 gallons
- Motor: 5 HP, 220 Volt, Three Phase
- Dimensions (L x W x H): 46" x 37" x 70"
- Bar Shear Work Height: 29"
- Punch Table Top Height: 39-1/4"
- Cavity Table Top Height: 41"
- Weight (May Vary): 2,700 lbs
Optional Tooling & Accessories
- V-Coper Notcher
- Square Notcher
- Pipe Notcher
- Slug Type Angle Shear
- Universal Sever Housing
- Sever Plates
- Sever Housing Back
- 2-Part Brake
- Spring Return Brake
- Punch Table + Adjusting Jig
- Bar Shear Table
- Steel Bin Catcher
- Deluxe Back Gauge
- Bar Shear Stop
- Grease Bank
- Remote Foot Switch
- Oversize Die Stands
- Punch Nut Wrenches
- Punch Rack
- Oversize Die Stand
- Offset Die Stands
- Offset L100 Die Stand
- Oversize Punches
- Special Die Stand
Manufacturer | |
SKU |
156243
|
Shipping Method |
LTL Freight
|
Weight |
2,700 lb
|
Dimensions |
46 × 37 × 70 in
|
Country of Origin |
United States of America
|
Warranty |
3 Years
|