Uni-Hydro PRO 56-14 220V Single Phase 56 Ton Hydraulic Ironworker 105095

Description

Uni-Hydro’s Model PRO 56-14 is a true 4 station ironworker. Uni-Hydro takes pride in not welding a notcher on their machines and charging you thousands of dollars for it. The industry considers a welded notcher a 4th station, NOT THEM!

The PRO Series of Uni-Hydro are machines designed with a Flat Bar Shear, Power Cavity, Punch Station and Notching Station.

Their machines are made in the USA, not assembled from imported parts. All Uni-Hydro machines are built from the ground up at their factory in Cosmos, MN.

Features

• 6″ Open Throat Punch with 56-ton Capacity
• 14” Bar Shear with 4-Sided Blade
• Safety Manual Punch Aligner
• 4-way 14″ Low Rake Flat Bar Shear
• Bar Shear Hold-Down can be Fixed or Adjustable
• Magnetic Starter for Safety & Reliability
• Grease Bank
• Built for Forklift Handling
• Full Stroke Control
• Full 4th Notcher Station - (Add an optional Square, V- Coper or Pipe Notcher)

Specifications

• Model: PRO 56-14
• Tonnage: 56
• Throat Depth: 6"
• Punch:  
  • 1-1/4" hole in 1/2" mild steel
  • 13/16" hole in 3/4" mild steel
• Bar Shear:           
  • 3/8" x 14"
  • 1/2" x 10"
  • 5/8" x 8”
  • 3/4" x 6”
• Angle Shear 90°:                
  • Slug Type  -  3" x 3" x 3/8"
  • Sever Cut  -  4" x 4" x 3/8"
• Miter Angle 45°:                
  • Bar Shear  -  3" x 3" x 3/8"
  • Slug Type  -  2" x 2" x 5/16"
• Rod Shear:          
  • Round (Max)  -  1-1/16"
  • Square (Max)  -  1-1/16”
• V Coper Notcher 90°: For 3" x 3" x 1/4” Angle Iron
• Square Notcher:               
  • Notcher Station  -  2" x 3" x 3/8"
  • Punch/Power Cavity -  1-3/4" x 2" x 1/4"
• Pipe Notcher (Sch 40 or 80): 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4”, 2"
• Brake: 6" or 9” x 1/4"
• Channel Shear: 6" or 9” x 1/4"
• Strokes Per Min: 
  • Light Material  - 50
  • Max Capacity  -  7
• Hydraulics: 1,200 psi
• Oil Capacity: 20 quarts    
• Motor: 5 HP, 220 Volt, Single Phase
• Dimensions (L x W x H): 33" x 27.25" x 57"
• Bar Shear Work Height: 29"
• Punch Table Top Height: 38-1/4"
• Cavity Table Top Height: 37-1/4"
• Notcher Station Work Height: 26”
• Weight (May Vary): 1,720 lbs

Optional Tooling & Accessories

• V-Coper Notcher
• Square Notcher
• Pipe Notcher
• Slug Type Angle Shear
• Universal Sever Housing
• Sever Plates
• Sever Housing Back
• 2-Part Brake
• Spring Return Brake
• Punch Table + Adjusting Jig
• Bar Shear Table
• Steel Bin Catcher
• Deluxe Back Gauge
• Bar Shear Stop
• Grease Bank
• Remote Foot Switch
• Oversize Die Stands
• Punch Nut Wrenches
• Punch Rack
• Oversize Die Stand
• Offset Die Stands
• Offset L100 Die Stand
• Oversize Punches
• Special Die Stand