Sharp Industries 220V Three Phase Heavy-Duty Vertical/Horizontal Combination Milling Machine VH-25DVS

Description

This is a versatile machine with 2 spindles, vertical, and horizontal. By taking out the locating pins and swivel the overarm to the desired position it can switch between vertical and horizontal milling operations. It allows the work piece to stay at the same fixed position and perform various milling works. Thus it avoids losing accuracy due to the loading and unloading of work piece. 

Features

• 5HP, NST #40 Vertical Spindle with Digital Variable Speed Drive 
• 5HP, NST #40 Horizontal Spindle with Digital Variable Speed Drive 
• 4-Way Tilt Mill Head for Added Versatility 
• Power Feed on X, Y, & Z Axis/Knee, Motor 0.5HP, Gear Ration 1:10
• Heavy Duty Box-Type Column 
• Box Ways on Cross Feed/Y-Axis and Knee/Z-Axis, and Dovetail Way on Table/X-Axis 
• Meehanite Casting 

Standard Equipment

• Coolant System (1/8 HP) 
• Heat Treatment and Grinding (X/Y/Z) 
• Turcite B (X/Y)
• Work Light, 24V 
• Electrical Box 
• Control Panel 
• X/Y auto feed 
• Knee auto feed 
• 1” dia. horizontal arbor with 2 arbor supports 
• Automatic lubrication system 
• Splash pan 
• Spindle shield 
• Back chip cover (Y) 
• Front finned bellows cover (Y) 
• X/Y axis lead screw 
• Toolbox and Tools

Specifications

Capacity

• Table Size: 11.81” x 53.93”
• T-slots (No.xWidthxPitch): 3 x 5/8” x 2.75”
• Table Travel
  • X Longitudinal: 39.4”
  • Y Cross: 15.7”
• Ram Travel: 27.5”
• Knee Travel (Vertical): 18.5”
• Ram Swivel: 360°

Table Fees, Rapid 

• Longitudinal Feeds (12 speeds): 1.18-39.37 in/min 
• Longitudinal Rapids: 1.18-39.37 in/min 
• Vertical Rapids: 1.96-3.15 in/min 

Vertical Spindle

• Spindle Taper: NST #40 
• Spindle Speeds (Variable): 60-4,500 rpm 
• Spindle Motor: 5 HP 
• Quill Travel: 5.51”
• Quill Feeds: 0.0015, 0.003, 0.006 in/min 
• Quill Diameter: 4.13” 
• Spindle Center to Column: 7.08-34.64” 
• Spindle Nose to Table: 3.93-22.44”
• Vertical Head Swivel (L to R): 90°
• Vertical Head Tilt (Up and Down): 45°

Horizontal Spindle

• Spindle Nose Taper: NST #40
• Spindle Speed Range: 60-1400 rpm 
• Spindle Motor: 5 HP
• Spindle Centerline to Table: 0-16.53”
• Spindle Centerline to Overarm: 8.46”
• Spindle Nose to Column: 1.13”

Motors

• Vertical Spindle: 5 HP 
• Horizontal Spindle: 5 HP 
• X/Y Axis Motor: 0.5 HP 
• Z Axis Motor: 0.5 HP 
• Coolant System: 0.125 HP 

General 

• Electrical Requirements: 220V Three Phase 30 amp 
• Floor Area (WxDxH): 89.37” x 122” x 99.2”
• Approx Weight: 4,850 lbs 

Optional Add-Ons

• Power draw bar 
• 6” KURT vise 
• Digital Readout System 
• Clamping kit 
• CE mark, UL components 
• 440V Transformer