Marvel 5 HP 230V Three Phase Horizontal Post Style Band Saw PA260MPC

FREE SHIPPING

Manufacturer Part: EMT ID:
PA260MPC (230V)
13162

  • Capacity: 12" W x 10.25" H, 10.25" Round
  • Table Height: 27"
  • 1-1/4” Blade
  • MPC Programmable Control
Details below

Specifications and Features

  • Capacity Blade at 90° Rectangle: 12” Wide x 10.25” High (310 x 260 mm)
  • Capacity Blade at 90° Round:10.25” (260 mm)
  • Blade: 1.25” L x .042” W x 12’11” H (34 x .042 x 3920 mm)
  • Blade Tension: Hydraulically controlled tension (30,000 psi) provides consistent square cutting accuracy. The motion detector will shut the machine off should the blade break or stall.
  • Speed Range: 65 – 330 feet per minute (20 – 100 meters per minute) infinitely variable through a frequency inverter drive and heavy-duty worm gear transmission.  The broad speed range allows for optimum cutting of a large spectrum of materials. A read out at the operator’s touch screen assures accurate speed setting.
  • Hydraulic Shuttle Feed: Length settings of 0 - 16” (0 – 406 mm) are accomplished with simple programming at the operator’s touch screen.  The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy, reducing material loss.  Repeatability is + .005 per index. 
  • Hydraulic Down Feed:    Feed rate and down pressure can be controlled independently for fast, accurate cutting.  Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut.  Both settings are made at the operator’s station.
  • Motors: 5 H.P. (3.75 kW) Inverter Drive.  Hydraulic Pump Motor:  1 H.P. (.75 kW)(23 gal).  Coolant Pump Motor:  1/8 H.P. (0.09 kW) (22 gal). 
  • Voltage: 230 volts, 3 Phase. 60 Hz
  • Operator’s Control Panel: Mounted on the left-hand side of the machine. It offers full control of the all the features of the machine such as; vising, saw frame, Bundle Clamping, Touch Screen, Shuttle Advance & Retract, Coolant, Work Light and more.
  • MPC Programmable Control: Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to 100 jobs. Inputs include Part Length from 0 to 999” (25 m) (in inches up to 3 decimal places) and Number of Pieces to be cut.  The Automatic Piece Counter stops each job when the pre-set number of cuts have been made.  The control provides the option of running up to 20 parts in one job consecutively.
  • Out-of-Stock Switch: The machine will shut off automatically when material is no longer present in the rear vise jaws, allowing for truly automatic operation.
  • Blade Guides: The hydraulic clamping and combination roller bearing and carbide blade guides reduce heat and blade stress providing longer blade life and accuracies of + .002 per inch (.051 mm) of cut material. Large anti-vibration rollers help to increase blade life.
  • Fast Approach: Work height is automatically set allowing the head to raise just enough to clear the work piece while reducing cycle time and improving cutting performance.
  • Chip Brush: Powered from the main drive shaft of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance and blade life.
  •  Work Light: Positioned directly over the work area to provide better illumination of the cutting area, the work light can be turned on and off independently from the operator’s control panel.
  • Vice Jaws: Hydraulic Full Stroking.  Front jaws are split to reduce the remnant to as little as 2.75” (70 mm).  The split vise jaws also help to reduce burrs left on the material and are ideal for bundle cutting.  Holding the work piece on both sides of the blade reduces blade vibration, providing more accurate cuts and longer blade life. Rear Vise:  The rear vise jaw floats hydraulically to accommodate crooked stock assuring straight, accurate cuts.
  • Automatic Chip Removal: The chip auger rotating in the coolant return removes chips quickly and efficiently, freeing the operator to perform more productive operations.  Coolant is allowed to drain back to the tank before the chips are removed from the machine.
  • Variable Vise Pressure: Hydraulic clamping pressure to the work holding jaws can be adjusted as required to hold solid or thin wall material, allowing the piece to be held securely and without distortion.
  • Machine Weight: 3,860 lbs (1751 kg)
  • Table Height: 27” (686 mm)

Options

  • Hydraulic Hold-Downs: The nesting fixtures for vertical clamping are designed for high-production multiple cutting. Vertically mounted hydraulic clamps located on each vise jaw apply downward pressure to hold multiple bar work or structural shapes.
  • Variable Vise Pressure: Hydraulic clamping pressure to the work holding jaws can be adjusted as required to hold solid or thin wall material, allowing the piece to be held securely and without distortion.
  • Free Standing Control Console: Replaces standard control console mounted to machine base with a free-standing pedestal and 6’ flexible electrical and hydraulic lines.
  • First Section Roller Table: Table is constructed from 4” x 5.4 lb. Channel with five 2.5” diameter ball bearing rollers on 12” centers.
  • Extension Roller Table: Table is constructed from 4” x 5.4 lb. Channel with five 2.5” diameter ball bearing rollers on 12” centers.
  • Coolant Pan: Fitting roller conveyors, the coolant pan collects and returns coolant back to machine. Included is the pan, V-trough, and hangers

 

Manufacturer
SKU
PA260MPC (230V)
Shipping Method
LTL Freight
Weight
3,860 lb
Dimensions
90 × 85 × 70 in
Country of Origin
United States of America
Warranty
1 Year
(Parts)
There are currently no reviews for this product.
Be the first to review this product.
Looking for parts? Let us know what you need in the form, or give us a call at 281-241-9504
Marvel 5 HP 230V Three Phase Horizontal Post Style Band Saw PA260MPC
  • Marvel 5 HP 230V Three Phase Horizontal Post Style Saw PA260MPC at Elite Metal Tools
Request Sale Price

This product might qualify for a promotional price. Fill this out and we'll get a quote out to you right away!

Request Financing?

What is the Elite Advantage?

Free Shipping at Elite Metal Tools

Free Shipping

The Elite Metal Tools Promise!
Price Matching at Elite Metal Tools

Price Matching

The best prices on the web.
Customer Service at Elite Metal Tools

Customer Service

Our customers matter.
Knowledgeable Staff at Elite Metal Tools

Knowledgeable Staff

In our business, information is king.
Product Selection at Elite Metal Tools

Product Selection

Your one-stop-shop.