Ebac Industrial RM40 334W Portable Compact Stand Alone Dehumidifier with Integral Water Container 10187MB-US

Description

The EIP RM40 dehumidifiers are compact, stand alone units which provides quiet, maintenance free service in extreme environments, without the cost, and irritation of coil freeze-up. This simple, yet effective solution has the features of many larger models. They are rugged enough for industrial shops and storerooms. Their attractive appearance makes them suitable for basement or garage applications. They can be is easily transported to the problem area, and goes quietly to work.

Application

• Warehouse
• Basements
• Water Damage Restoration
• Sports Halls
• Storage Areas
• Laboratories
• Oil Rigs
• Agriculture
• Kitchens
• Pumping Stations
• Hotel/ Motel
• Stadiums
• Ships / Barges

How the RM40 Works

EIPL dehumidifiers are effective solutions to environmental control problems. The RM range of units are high-capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air through the refrigeration process. The fan draws the moist air through the cold evaporator coil, which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray, which is equipped with an internal condensate pump for easy removal of collected moisture. The cooled air then passes through the hot condenser coil where it is reheated using the same energy removed during the cooling phase, plus the additional heat generated by the compressor. The air is, therefore, discharged from the dehumidifier at a slightly higher temperature with a lower absolute humidity than that which entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area. Because the RM ranges of units are equipped with an internal humidistat, they automatically switch on and off to save energy and expense by maintaining the desired level of humidity with intermittent operation.

Features

• Rotomoulded Cover & Base        
• EIP’s unique “Hot Gas” defrosting feature which automatically melts away frost buildup providing effective operation at low ambient temperatures.
• Rugged, galvanized Subframe
• Simplicity of installation and operation.
• On/Off Control
• Adjustable Control Humidistat
• Fitted Mains Plug
• Castors
• Integral Water Container
• Electronic Defrost Control
• Compressor Type: Rotary
• Bucket Full Indicator
• Permanent Drain Facility
• Hot Gas Defrost System
• Washable Air Filter
• Quick Release Hose Connector
• Moulded Carrying Handles
• Galvanized Steel Subframe

Specifications

• Height: 25” (620mm)
• Width: 15” (385mm)
• Depth: 14” (360mm)
• Weight: 42 lbs (19kg)
• Voltage: 110V
• Phase: 1
• Frequency: 60 Hz
• Current: 3.3A
• Power: 344W
• Airflow: 170 CFM (287m3/hr)
• Noise Level: 47 dba
• Refrigerant: R410a
• Effective Volume: 3,000 cu.ft (85m3)
• Extraction @ 65°F 60%RH: 24 ppd
• Efficiency @ 65°F 60%RH: 1.4 l/kW
• Typical Extraction @ 80°F 60%: 34 ppd
• Typical Efficiency @ 80°F 60%: 1.9 l/kW
• Min Operating Temp: 33°F (1°C)
• Max Operating Temp: 95°F (35°C)