Ebac Industrial DD300 110V 1400W Desiccant Dehumidifier 10501SS-US

Description

The DD300 desiccant dehumidifier has a compact, rugged, lightweight design that facilitates easy transportation by one person and is easily accommodated within space restricted areas. The unit incorporates a PTC Heater ensuring maximum drying is immediately reached and constantly maintained while the unit is running. In addition to the hours run meter, which shows the units running time, an ammeter is also incorporated in order to monitor the units drying effectiveness. Manual / Automatic control is a standard feature within the DD range of desiccant dehumidifiers, and a remote humidistat can quickly and easily be connected for automatic operation and control. The EIP range of DD desiccant dehumidifiers are all manufactured from a high-grade stainless steel, ensuring a rust free product when used in the most severe of applications. The spigot connectors allow quick and easy installation. All models incorporate a high efficiency patented PPS Rotor. This design incorporates an 82% active Silica Gel to ensure optimum performance over the equipment’s wide operating range of environments. All desiccant rotors supplied by EIPL are washable and designed for high performance / long life.

Application

• Offices
• Shops
• Restaurants
• Warehouses
• Basements
• Factories
• De-Flooding
• Pharmaceutical
• Defense Industry
• Confectionary
• Laboratories
• Medical
• Food Industry
• Agriculture
• Cold Stores
• Hospitals
• Hotels
• Stadiums
• Ships

How the DD300 Works

Dehumidification is possible using two possible principles, Condensation with refrigeration style dehumidifiers and Adsorption with desiccant dehumidifiers. Desiccant dehumidifiers perform exceptionally well when used in cooler climates, or when a low dew-point, deep drying or low humidity levels are required. Since desiccant dehumidifiers do not produce water, they will work effectively down to sub zero temperatures. Their operation is simplistic yet extremely effective and reliable. Air (Process Air) is drawn into the dehumidifier, where is passes over a wheel impregnated with Silica Gel. As the air passes over this wheel, any moisture present in the air, is absorbed into the Silica Gel wheel before leaving the dehumidifier as warm dry air. The Silica Gel wheel is continually, slowly rotating, typically at three revolutions per hour. As the wheel rotates a small portion passes through the regeneration segment. During this phase a second air stream (Regeneration Air) is heated to a high temperature before passing over the wheel. Any moisture present in the wheel is released into this air stream, this hot wet air is then exhausted outside the area being dried.

Features

• Stainless Steel Construction
• Low Temperature Operation  
• On/Off Control
• Ammeter
• Electronic Controls
• Manual / Automatic Mode Selection
• Remote Humidity Sensor Facility
• Hours Run Meter
• Fitted Mains Plug
• Fan Speeds: 1
• High Capacity PTC Heater
• Process / Regen Air Filter
• Rubber Anti-Vibration Feet
• Single, Air Inlet Design
• Free Standing
• Carrying Handles
• High Temperature Safety Cut-outs

Specifications

• Height: 14.5” (370 mm)
• Width: 14.2” (360 mm)
• Depth: 17” (430 mm)
• Weight: 44 lbs (20 kg)
• Voltage: 110 V
• Current: 12.4A
• Phase: 1
• Frequency: 60 Hz
• Power: 1400W
• Process Airflow – Dry Air: 136 cfm (231 m3/hr)
• Regen Airflow – Wet Air: 42 cfm (71 m3/hr)
• Process Duct Size – Dry Air: 5” (130 mm)
• Regen Duct Size – Wet Air: 2.75” (70 mm)
• Rotor Wheel Speed: 20 rph
• Noise Level: 67 dba
• Typical Extraction @ 27°C 60%: 69 ppd
• Min Operating Temp: -4 °F (-20°C)
• Max Operating Temp: 104 °F (40°C)

Additional Accessories

• Part #3110453: 70mm Dia Flexible Ducting
• Part #3110455: 130mm Dia Flexible Ducting
• Part #1050014: Process Air Duct Attachment
• Part #3035157: Mechanical Humidistat - Internal Sensor
• Part #3035160: Electronic Humidistat - Internal Sensor
• Part #3035162: Electronic Humidistat - External Sensor