Ebac Industrial DD400P 220V 1800W Portable Desiccant Dehumidifier 10640RG-US

Description

The DD400-P is the largest portable desiccant dehumidifier within the EIPL range. It’s compact, rugged, lightweight design facilitates easy transportation by one person and is easily accommodated within space restricted areas. The unit incorporates a Electronic Humidity Controller, and PTC Heater, ensuring maximum drying is immediately reached and constantly maintained while the unit is running. Running time can be recorded via the hours run meter located on the control panel, The shock absorbing tires allow the unit to be transported over rough ground The DD400-P is manufactured from Epoxy Powdered Coated Steel, making the DD400-P and robust desiccant dehumidifier suitable for the most severe of applications. The spigot connectors allow quick and easy installation and provides the versatility of connecting flexible ducting. All models incorporate a high efficiency patented PPS Rotor. This design incorporates an 82% active Silica Gel to ensure optimum performance over the equipment’s wide operating range of environments. All desiccant rotors supplied by EIPL are washable and designed for high performance / long life.

Application

• Offices
• Shops
• Restaurants
• Warehouses
• Basements
• Factories
• De-Flooding
• Pharmaceutical
• Defense Industry
• Confectionary
• Laboratories
• Medical
• Food Industry
• Agriculture
• Cold Stores
• Hospitals
• Hotels
• Stadiums
• Ships

How the DD400P Works

Dehumidification is possible using two possible principles, Condensation with refrigeration style dehumidifiers and Adsorption with desiccant dehumidifiers. Desiccant dehumidifiers perform exceptionally well when used in cooler climates, or when a low dew-point, deep drying or low humidity levels are required. Since desiccant dehumidifiers do not produce water, they will work effectively down to sub zero temperatures. Their operation is simplistic yet extremely effective and reliable. Air (Process Air) is drawn into the dehumidifier, where is passes over a wheel impregnated with Silica Gel. As the air passes over this wheel, any moisture present in the air, is absorbed into the Silica Gel wheel before leaving the dehumidifier as warm dry air. The Silica Gel wheel is continually, slowly rotating, typically at three revolutions per hour. As the wheel rotates a small portion passes through the regeneration segment. During this phase a second air stream (Regeneration Air) is heated to a high temperature before passing over the wheel. Any moisture present in the wheel is released into this air stream, this hot wet air is then exhausted outside the area being dried.

Features

• Low Temperature Operation  
• On/Off Control
• Electronic Humidity Controls
• Integral humidity Sensor
• Hours Run Meter
• Fitted Mains Plug
• Fan Speeds: 1
• High Capacity PTC Heater
• Process / Regen Air Filter
• Shock Absorbing Wheels / Tires
• Dual, Air Inlet Design
• Free Standing
• Handle
• Epoxy Coated Steel
• High Temperature Safety Cut-outs

Specifications

• Height: 31” (787mm)
• Width: 21.75” (552 mm)
• Depth: 19” (487mm)
• Weight: 68lbs (31kg)
• Voltage: 220 V
• Current: 8A
• Phase: 1
• Frequency: 60 Hz
• Power: 1800W
• Process Airflow – Dry Air: 197 cfm (334 m3/hr)
• Regen Airflow – Wet Air: 119 cfm (202 m3/hr)
• Process Duct Size – Dry Air: 5” (130 mm)
• Regen Duct Size – Wet Air: 4” (100 mm)
• Rotor Wheel Speed: 20 rph
• Noise Level: 67 dba
• Typical Extraction @ 27°C 60%: 71.5 ppd
• Min Operating Temp: -4 °F (-20°C)
• Max Operating Temp: 104 °F (40°C)

Additional Accessories

• Part #3110454: 102mm Dia Flexible Ducting
• Part #3110455: 130mm Dia Flexible Ducting
• Part #1064004: Process Air Duct Attachment (130mm)
• Part #1064005: Regen Air Duct Attachment (100mm)