Campro USA 30HP Three Phase Y-Axis Lathe Turning Center with 10” Chuck and 6” Sub-Spindle CPL-3010SY

Description

The CPL-3010SY was designed to meet Campro USA’s customers’ needs for a flexible, highly productive, and cost effective machine. The CPL-3010SY turning center is designed to provide superior rigidity, accuracy, and surface finishes. Milling and drilling with live tooling, a true Y-Axis plus a sub-spindle adds to the versatility of this model. High-speed turret indexing, quick spindle acc./dec. times and fast rapid traverse rates minimize non-cutting time. Classic manufacturing methods and ultra rigid construction are combined with advanced technological features to provide exceptional value.

Features

• Y axis 4.33”( +/- 2.16”)
• Live Tooling with C-axis
• Sub-spindle with Full C axis
• Wide full power range 30 HP Built In Spindle Motor
• 2.95” Bar capacity
• 4,000 RPM Spindle
• 0.2 Second turret indexing
• Rigid one piece box design bed
• Separate 65 gallon coolant tank
• Pretension ball screws with “Double anchored” support system on all three axes
• 787 IPM rapid traverse
• 18,739 lbs. machine weight
• FANUC 0iTF Control
• Consistent Accuracy
  • Symmetrical headstock design eliminates thermal expansion in the X axis direction.
  • Optimal pre-load of high quality ballscrews with double anchored support minimizes ballscrew thermal expansion.
  • Heat ventilation design of bed and splash guard also aid in thermal expansion control.
• Powerful Spindle
  • Powerful 30-hp spindle allows an increased depth of cut which reduces the number of roughing passes required.
• Rugged Box Way System
  • High precision ground box ways allow vibration free heavy duty cutting and superior surface finishes.
• Fast, Rigid, and Reliable Servo Turret
  • Quick and accurate turret indexes (0.2 sec, 1 station / 0.6 sec 7 stations) are accomplished by use of a high performance AC servo motor and 3- piece coupling construction.
• Live Tooling with Y-Axis and C-Axis
  • Milling and drilling operations can be performed by way of live tool turret.  Since the milling operations can be finished on the lathe, there is no need to set up and run a second operation on a separate machining center.
• Sub-Spindle
  • Opposite “sub-spindle” moves on its own axis (B) to accept parts from the main spindle.  Second side turning operations can be accomplished with tools mounted on the rear side of the turret. 
• Separate Chip Box and Coolant Tank
  • Large capacity (65-gal) coolant tank is designed to prevent heat transfer and is easily removed. Separate type chip box is provided for convenient emptying and cleaning. Additionally, operator can remove chips during machine operation.

Standard Equipment

• Fanuc 0i TF control: Provided
• Hollow chuck with 1 set of soft jaws: 10” (Main)
• Hollow chuck with 1 set of soft jaws: 6” (Sub)
• Foot switch for chuck open/close: 1 set
• Spindle speed override: 50~150%
• Spindle rpm meter: 1 set
• Spindle load meter: 1 set
• Axial and Radial Live Tool Holders: 2 each – total 4
• Coolant supply system: Provided
• Tool box and manuals: 1 set

Specifications

• General Capacity
  • Maximum swing: 29.5”
  • Cross slide swing: 25.5”
  • Bar capacity (draw tube): 3.0”
  • Spindle speed: 4,000 rpm
  • Turret (Bi-directional): 12 stations
  • Cross travel (X axis): 10.23”
  • Longitudinal travel (Z axis): 33.4”
  • Cross travel( Y axis): 4.33”
  • Machine weight                : 18,739 lbs.
  • Floor Space: 187” x 83”
• Spindle (Main)
  • Spindle nose: A2-8
  • Bar capacity (draw tube): 2.95”
  • Spindle speed range: 25~4,000 rpm
  • Full power range: 25~4,000 rpm
  • Max. torque: 516 ft-lbs
  • Motor (30 min.) : 30 Hp
  • Standard chuck size: 10”
• Spindle (Sub)
  • Spindle nose: A2-5 (Built In)
  • Bar capacity (draw tube): 1.26"
  • Spindle speed range: 30~6,000 rpm
  • Full power range: 750~6,000 rpm
  • Max. torque: 52 ft-lbs
  • Motor (30 min.): 7.5 Hp
  • Standard chuck size: 6”
• Turret
  • Tool positions: 12
  • Index time (1 face / full): 0.2 / 0.6 sec.
  • Coupling type: 3 Piece
  • Servo drive mechanism: Bi-directional, random call
• Electric Supply
  • Voltage: 220 AC, 3phase, 60Hz
  • KVA: 26

Options

• Collet Chuck
• Special Purposed Chip Conveyor
• Oil Mist Collector
• Tool Setter
• Parts Catcher
• Automatic Bar Feeder
• Automatic Door
• Transformer
• CE Modification