|Manufacturer Part:||EMT ID:|
- 11" Stroke Length
- 14" Throat Depth
- 18" Throat Height
- 12 month manufactures warranty, built in the USA
The line of Betenbender HMI C-Frame Pess offers the best value in any line of C-Frame pressing equipment today! With a the wide range of tonnages, throat heights, throat depths and stroke length. There is a machine to fit your needs!
- Large heavy duty design of the press frame to limit the deflection
- Press bed bolted on, not welded, to prevent distortion. Can be easily removed for regrinding or adding more tapped holes
- Large rectangular tubes used at base of machine to give safe, instant portability.Oil reservoir is located vertically between the side plates to keep the machines foot print as small as possible.
- Hydraulic system is equipped with a wire mesh strainer on the suction side and a 10 micron filter on the return side to keep the system clean.
- Pump, motor, valve and reservoir are all easily accessible for maintenance.
- Large press bed to accommodate a variety of tooling other than just punching.
- Reservoir filled with oil.
- Remote foot control, cycle can be stopped and reversed at any point.
- Lock out - tag out accommodations.
- Operators manual.
12 month manufactures warranty Built in the USA!
|Tonnage Capacity||62 Tons|
|Length of Stroke||11"|
|Press Platen L-R, F-B||42"x17"|
|Floor to Press Platen||36"|
|Distance between Housing||22.5"|
|Cylinder Bore Diameter||8"|
|1" Cycles per Minute||44|
|Pump Capacity G.P.M||17.9 GPM|
|Operating Pressure PSI||3000 PSI|
|Motor||15 H.P. 220V, 3PH|
|Resevoir Capacity||55 Gallons, Oil furnised|
60 × 60 × 70 in
|Country of Origin||
United States of America