Adwood FLEXY Series 220V 9.79HP Three Phase Edgebander FLEXY (GS)

Description

The FLEXY Edgebander is a compact-sized edgebander, providing high performance and a high-quality finish. Industrial machine performance at an affordable price.

The FLEXY series is ideal for workshops where space and cost are specifically important.

Features

• FEEDING STATION
  • Tray for the roll of edging material
  • Timer controlled automatic feeding allowing the precise adjustment of the infeed surplus and minimizing the waste of edging material
  • Pneumatic pre-cutting guillotine (up to 3 mm PVC/ABS edges thickness)
  • Longer and reinforced infeed fence
  • Feeding tray with non-return tape system
• GLUE APPLICATION UNIT M2-NS
  • New design with improved thermodynamics, granting a shorter heating time with less power consumption (2.5kW); Full TEFLON® coating of the whole assembly
  • Injection of melted glue at the upper and lower points of the application roller where heating elements are built in to maintain optimum working temperature
  • Automatic temperature control by electronic thermostat preventing the scorching of glue when the machine is idle; 1.5 kg capacity glue tank
  • New glue regulating gate
• PRESSURE ROLLERS
  • A group of 2 rollers exerting pressure on the edge band in order to achieve its adhesion onto the panel edge. The first roller is driven, and the second one is of smaller diameter and idle.
• END TRIMMINGV-2
  • Single support / single carriage / single through shaft HF motor (0.2 kW/ 12000 RPM) / two saw blades, performing the front and the rear trim cut cycles
  • Soft and precise movement of the carriage slip on precision prismatic guides
  • Tooling: TCT saw disk set ø100 x 32 x 3 Z30
  • New dust collector system
• T & B TRIMMING UNIT JC-2
  • 2 separate units for the machining excess of edge band along the upper and lower edges of the panel
  • Two HF motors of 0.27 kW / 12000 RPM with milling cutter heads with TC inserts
  • Roller type tracers for work with high gloss and 3D effect panels and edges
  • Tooling: milling cutters with TC changeable blades set ø65 x 20 x 20 Z4 R3
• GLUE SCRAPER RR-8
  • Designed to remove residue of glue on the top and bottom surfaces of the panel
  • Two blade holders with independently adjustable vertical copying devices
  • Air blow nozzles for tracer cleaning
  • Manual positioning of the station in ON/OFF position
• STANDARD CONFIGURATION
  • HF motors controlled by independent electronic inverters
  • Electrical parts, meeting the respective CE rules
  • Control panel with touchscreen display and integrated PLC
  • Dust collectors on all working stations
  • Pressure bean with closer wheels (less space between them)
  • Fixed type roller support for big size workpieces
  • Air blow nozzles for tracers cleaning
  • Cabin, housing all working units

Specifications

• Edgebanding Material (Melamine/PVC/ABS/PP/veneer): 0.4 – 3 mm*
• Panel
  • Thickness: 8 – 50 mm
  • Length: 120 – unlimited mm
  • Width: 75 – unlimited mm
• Working speed: 7 m/min (23 ft/min)
• Working pressure: 6 – 7 kg/cm2
• Total electrical output: 7.3 kW (9.79 HP)
• Electrical connection: 3 x 220V / 60 Hz
• Dimensions installed: 2623 mm x 630 mm x 1375 mm
• Net weight: 557 kg
• Requirements
  • Electrical Connection: 220 volt, 3-phase, 60 Hz
  • Dust Extraction: Five x 5” @ 2200 cfm
  • Compressed Air Connection: 5 cfm @ 90 psi

*For panels up to 20 mm in height.

Options

• Start-up Service
• RB-5 Radius Scraper
  • Designed to give the perfect finishing touch of the radius of the PVC/BC edging after T & B trimming
  • Roller type horizontal and vertical tracers with SIKO digital counters for precise, easy adjustment and cleaning by air blow nozzles; Extraction system with PVC/ABS waste collector
  • Blade holders for fast and easy change
  • Manual Positioning of the station in ON/OFF position
• DUOMELT® pack
  • DUOMELT® upgrade pack, allowing the use of the unit both with EVA and PUR adhesives. The optional pack includes a simple and efficient draining system for the residual glue in the glue pot and the necessary software to support this feature.
• Spare M-2NS glue unit
• Spare M-2 DUOMELT® glue unit
• Button for ball joint adjustment
• Pneumatic cylinder on infeed fence for safer feeding and interval improvement
• Panel width reduced to 60 mm
• Extension roller support instead of fixed
• Cleaning agent spray station at exit
• Nesting type vertical tracers
• Cabin lights (LED type)
• Single phase (1 x 220V) version