Adwood FLEXY Series 220V 13.14HP Three Phase Edgebander with Pre-Mill & Buffing Unit FLEXY P (GS,Buf)

Description

The FLEXY Edgebander is a compact-sized edgebander providing high performance and a high-quality finish. Industrial machine performance at an affordable price.

The FLEXY series is ideal for workshops where space and cost are specifically important.

Features

• FEEDING STATION
  • Tray for the roll of edging material
  • Timer controlled automatic feeding allowing the precise adjustment of the infeed surplus and minimizing the waste of edging material
  • Pneumatic pre-cutting guillotine (up to 3 mm PVC/ABS edges thickness)
  • Longer and reinforced infeed fence
  • Feeding tray with non-return tape system
• PRE-MILLING PF-2
  • 2 x HF motors - the first 1.1 kW, rotating CCW and the second 0.75 kW rotating CW, with pneumatic pressure control, providing optimum finish
  • New air blow nozzles for removing dust
  • Aluminum milling heads with interchangeable DIA cutters
    • Standard tooling spec: ø60 ø20 H30 Z6
• GLUE APPLICATION UNIT M2-NS
  • New design with improved thermodynamics, granting a shorter heating time with less power consumption (2.5kW); Full TEFLON® coating of the whole assembly
  • Injection of melted glue at the upper and lower points of the application roller where heating elements are built in to maintain optimum working temperature
  • Automatic temperature control by electronic thermostat preventing the scorching of glue when the machine is idle; 1.5 kg capacity glue tank
  • New glue regulating gate
• PRESSURE ROLLERS
  • A group of 2 rollers exerting pressure on the edge band in order to achieve its adhesion onto the panel edge; The first roller is driven and the second one is of smaller diameter and idle
• END TRIMMING V-2
  • Single support / single carriage / single through shaft HF motor (0.2 kW / 12000 RPM) / two saw blades, performing the front and the rear trim cut cycles
  • Soft and precise movement of the carriage slip on precision prismatic guides
  • Tooling: TCT saw disk set ø100 x 32 x 3 Z30
  • New dust collector system
• T & B TRIMMING UNIT JC-2
  • 2 separate units for the machining excess of edge band along the upper and lower edges of the panel
  • Two HF motors of 0.27 kW / 12000 RPM with milling cutter heads with TC inserts
  • Roller type tracers for work with high gloss and 3D effect panels and edges
  • Tooling: milling cutters with TC changeable blades set ø65 x 20 x 20 Z4 R3
• GLUE SCRAPER RR-8
  • Designed to remove possible residue of glue on the top and bottom surfaces of the panel
  • Two blade holders with independently adjustable vertical copying devices
  • Air blow nozzles for tracer cleaning
  • Manual positioning of the station in ON/OFF position
• BUFFING UNIT PC-3
  • Designed to remove possible residues of glue
  • Restore the PVC/ABS edge color and polish it after trimming and scraping operations
  • 2 independent units with tilting motors (2 x 0.55 kW / 15000 RPM)
  • Tooling: cotton discs ø100 mm
• CONTROL PANEL 5.6"
  • Pivoting 5.6 " TFT color touch screen
  • Intuitive modern interface user friendly control with direct connection to the PLC, providing quick access and monitoring of all machine functions in real time (start/stop, program editing, parameters check & editing, alarms visualization, PLC I/O diagnostics)
  • Multi-language support and 128 MB memory to store screen data and work programs
• STANDARD CONFIGURATION
  • HF motors controlled by independent electronic inverters
  • Electrical parts, meeting the respective CE rules
  • Control panel with touchscreen display and integrated PLC
  • Dust collectors on all working stations
  • Pressure beam with closer wheels (less space between them)
  • Fixed type roller support for big size workpieces
  • Air blow nozzles for tracers cleaning
  • Cabin, housing all working units

Specifications

• Edgebanding Material (Melamine/PVC/ABS/PP/veneer): 0.4 – 3 mm*
• Panel
  • Thickness: 8 – 50 mm
  • Length: 120 – unlimited mm
  • Width: 75 – unlimited mm
• Working speed: 7 m/min (23 ft/min)
• Corner rounding unit capacity: -
• Pre-milling cutters height: 30mm / 55mm
• Working pressure 6 – 7 kg/cm2
• Total electrical output: 9.8 kW (13.14 HP)
• Electrical connection: 3 x 220V / 60 Hz
• Dimensions installed: 3065 x 630 x 1375 mm
• Net Weight: 668 kg
• Requirements
  • Electrical Connection: 220 volt, 3-phase, 60 Hz
  • Dust Extraction: Five x 5” @ 2200 cfm
  • Compressed Air Connection: 5 cfm @ 90 psi

*Depending on panel thickness.

Options

• Start-up Service
• Pre-Milling PF-2 tooling spec: ø60 ø20 H55 Z6
• RB-5 Radius Scraper
  • Designed to give the perfect finishing touch of the radius of the PVC/BC edging
  • after T&B trimming
  • Roller type horizontal and vertical tracers with SIKO digital counters for precise
  • easy adjustment and cleaning by air blow nozzles. Extraction system with
  • PVC/ABS waste collector
  • Blade holders for fast and easy change
  • Manual Positioning of the station in ON/OFF position
• DUOMELT® pack
  • DUOMELT® upgrade pack, allowing the use of the unit both with EVA and PUR adhesives. The optional pack includes a simple and efficient draining system for the residual glue in the glue pot and the necessary software to support this feature
• Spare M-2NS glue unit
• Spare M-2 DUOMELT® glue unit
• Button for ball joint adjustment
• Service station for M2 glue units
• Pneumatic cylinder on infeed fence for
• safer feeding and interval improvement
• Pneum. setting (ON/OFF) of RB-5
• Pneum. setting (ON/OFF) of RR-8
• DIA cutters head H55
• Panel width reduced to 60 mm
• Extension roller support instead of fixed
• Non-stick agent spray station at
• entrance
• Cleaning agent spray station at exit
• Nesting type vertical tracers
• Cabin lights (LED type)
• Connectivity kit (remote connection)
• Single phase (1 x 220V) version