Box and Pan Sheet Metal Brakes

• Box Depth: Unlimited
• Maximum capacity of 16 gauge mild steel.
• Clamping Force: 6 ton
• Bend Angle: 0 – 180°

• Length: 48"
• Thickness: 13 ga.
• Number of Fingers: 11
• Worktable Height: 28"

• Maximum Box Depth: 4”
• Maximum Lift of Beam: 1-1/2”
• Beam Adjustment, Front to Rear: 7/8”
• Number of Fingers and Width: 5 @ 3”, 2 @ 4”, 5 @ 5”

• Floor Stand INCLUDED
• Air/Hydraulic Assist - No Counterweight needed
• Bends up to 20 Gauge Mild Steel
• Bends up to 120 Degrees

• Stop rod for repeatability
• Counterweight apron assist
• Adjustable beam for varying sheet thickness
• 2-piece hardened finger assortment: 5 - 2", 6 - 3", 5 - 4"

• 48" x 16 Gauge Mild Steel Capacity
• Solid Heavy Duty Construction
• Reinforced Frame
• Hardened and Ground Fingers

• Allows for the operator to clamp the material with their foot, to keep hands free
• Built from the best possible components
• Easy to adjust gap adjustment
• Spring loaded cylinder assists lifting the apron which gives assistance operator when bending at full capacity

• Thickness (SS): 16 ga. (20 ga.)
• Box Depth: 2.5"
• Bend Angle: 0 – 135°
• Finger Sizes: 17 Total, 2 x 1-1/2”, 4 x 2”, 5 x 3”, 6 x 6”

• 24" x 16"-gauge mild steel capacity
• Includes floor stand
• Stop rod and counterweight assist
• 5-finger assortment

24" Length x 20 Gauge Mild Steel Capacity

5 Removable Fingers

Heavy Duty Construction

• Thickness (SS): 14 ga. (18 ga.)
• Stand: Yes
• Box Depth: 4"
• Bend Angle: 0 – 135°

• Maximum Beam Lift: 1-13/16”
• Maximum Box Depth: 2.5”
• Minimum Flange in Capacity Material: 0.4”
• Finger Widths: 1”, 1-1/8”, 1-3/8”, 1-1/2”, 1-3/4”, 2”, 3”, 4”, 6”, 7-3/4”, 10”, 10-5/8”

• Finger Nose Angle: 42 deg.
• Maximum Box Depth: 5"
• Maximum Beam Lift: 1-7/8"
• Finger Sizes: 1", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 3", 4", 6", 7-3/4", 10", 10-5/8"

• 50" Box and Pan Brake
• 14 Gauge Mild Steel Capacity
• Adjustable Hold Down Fence
• Adjustable Bend Gap

• Brake Range: 0°-135°
• Maximum Width: 48''
• Maximum Size of Pan/Box Sides: 6"
• Minimum Reverse Bend: 1/2"

• Finger Nose Angle: 42 deg.
• Maximum Box Depth: 5"
• Maximum Beam Lift: 1-7/8"
• Finger Sizes: 1", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 3", 4", 6", 7-3/4", 10", 10-5/8"

• Thickness (SS): 14 ga. (18 ga.)
• Box Depth: 2.5"
• Bend Angle: 0 – 135°
• Power: Manual

• 50" Box and Pan Brake
• Top/Bottom Fingers are Removable 
• 14 Gauge Mild Steel Capacity
• Air Cylinder Assist "No Need for Weights"

• Benchtop Brake
• 24-1/4" x 20 Gauge Capacity
• Maximum Box Depth 1-3/4"
• Heavy Duty  Construction

• 48-3/4" Bed Width
• 12 Gauge Capacity
• Counter Balance Weights
• Stand Included

• 72" x 22 gauge mild steel capacity 
• Includes floor stand 
• Compact design 
• Specially designed for light gauge sheet metal work 

• Floor stand INCLUDED
• Bends up to 20 Gauge Mild Steel
• Adjustable for Varying Material Thicknesses
• Air Hydraulic Assist - No Counterweight Needed

• 36" x 16-gauge mild steel capacity
• Counterweight apron assist
• Adjustable beam
• Floor stand included