Machine

  • Layout
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds 690532 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds 690532
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $33,312.72
$26,818
As low as $530.72/mo
View Details
Jet JTM-1254RVS with X Powerfeed 698084 at Elite Metal Tools
Jet JTM-1254RVS with X Powerfeed 698084
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $29,785.46
$23,410
As low as $463.28/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690546 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690546
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $30,339.53
$23,816
As low as $471.31/mo
View Details
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 690636 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 690636
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,055.99
$27,365
As low as $541.55/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds & Air Power Drawbar 698129 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds & Air Power Drawbar 698129
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,245.45
$30,443
As low as $602.46/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690526 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690526
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $30,542.26
$23,965
As low as $474.26/mo
View Details
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds 690157 at Elite Metal Tools
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds 690157
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,595.99
$19,595
As low as $387.78/mo
View Details
Jet JTM-1 Mill With Newall DP700 DRO With X-Axis Powerfeed 691188 at Elite Metal Tools
Jet JTM-1 Mill With Newall DP700 DRO With X-Axis Powerfeed 691188
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $22,703.99
$17,703
As low as $350.34/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds 698116 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds 698116
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,893.99
$29,295
As low as $579.74/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698121 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698121
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,921.07
$30,939
As low as $612.28/mo
View Details
Jet JTM-1 Mill With ACU-RITE 203 DRO and X-Axis Powerfeed 690168 at Elite Metal Tools
Jet JTM-1 Mill With ACU-RITE 203 DRO and X-Axis Powerfeed 690168
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $22,703.99
$17,703
As low as $350.34/mo
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691203 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691203
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,758.26
$21,184
As low as $419.23/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed 690629 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed 690629
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $38,921.07
$30,939
As low as $612.28/mo
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 691170 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 691170
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $31,082.80
$25,180
As low as $498.31/mo
View Details
Knuth 14HP Vertical Milling Machine Center X.Mill T 700 FA with Fanuc Control 181441 at Elite Metal Tools
Knuth 14HP Vertical Milling Machine Center X.Mill T 700 FA with Fanuc Control 181441
  • Motor rating main drive: 14.8 HP
  • Table load capacity: 1,320 lbs
  • Number of T-slots: 5 positions
  • Rapid feed X-, Y-, Z-axis: 1.417 in/min
$106,833.89
As low as $2,114.24/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 691191 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 691191
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $23,785.07
$18,999
As low as $375.99/mo
View Details
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds and Air Powered Drawbar 690622 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds and Air Powered Drawbar 690622
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $36,488.53
$29,152
As low as $576.91/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed 690530 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed 690530
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,663.80
$23,319
As low as $461.48/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed & Air Power Drawbar 698109 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed & Air Power Drawbar 698109
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,758.80
$29,351
As low as $580.85/mo
View Details
Jet JTM-1 Mill With Newall DP500 DRO With X & Y-Axis Powerfeeds 692189 at Elite Metal Tools
Jet JTM-1 Mill With Newall DP500 DRO With X & Y-Axis Powerfeeds 692189
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $21,487.72
$16,809
As low as $332.65/mo
View Details
Jet JTM-949EVS with Newall DP700 DRO, X Powerfeed & Air Power Drawbar 690536 at Elite Metal Tools
Jet JTM-949EVS with Newall DP700 DRO, X Powerfeed & Air Power Drawbar 690536
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,907.26
$26,521
As low as $524.85/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690645 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690645
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,407.45
$28,358
As low as $561.20/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO, X Powerfeed 698049 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO, X Powerfeed 698049
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,231.66
$27,494
As low as $544.10/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed 690525 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed 690525
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,731.45
$23,369
As low as $462.47/mo
View Details