Machine

  • Layout
Jet JTM-1050EVS2/230 Electronic Variable Speed Vertical Milling Machine 230V 3Ph 691600 at Elite Metal Tools
Jet JTM-1050EVS2/230 Electronic Variable Speed Vertical Milling Machine 230V 3Ph 691600
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $23,342.79
$18,285
As low as $361.86/mo
View Details
Jet JTM-949EVS Mill With X-Axis Powerfeed and Air Powered Draw Bar 690502 at Elite Metal Tools
Jet JTM-949EVS Mill With X-Axis Powerfeed and Air Powered Draw Bar 690502
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $25,922.79
$20,175
As low as $399.26/mo
View Details
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP700 2-Axis DRO 351150 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP700 2-Axis DRO 351150
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $12,285.69
$9,550
As low as $310.37/mo
View Details
Jet JTM-2 Step Pulley Milling Machine 115/230V 1Ph 690089 at Elite Metal Tools
Jet JTM-2 Step Pulley Milling Machine 115/230V 1Ph 690089
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $14,742.79
$11,345
As low as $368.71/mo
View Details
Sharp Industries 220V 54” Digital Variable Speed Large Vertical Knee Mill TMV-DVS at Elite Metal Tools
Sharp Industries 220V 54” Digital Variable Speed Large Vertical Knee Mill TMV-DVS
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 39” x 16.3” x 5”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$22,995
As low as $455.07/mo
View Details
Jet JTM-1 Step Pulley Milling Machine 230V 3Ph 690082 at Elite Metal Tools
Jet JTM-1 Step Pulley Milling Machine 230V 3Ph 690082
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $14,865.69
$11,449
As low as $372.09/mo
View Details
Sharp Industries 220V 9" x 49” Digital Variable Speed 2 Axes CNC Vertical Knee Mill LMV-49/DVS/MP-2 G2 at Elite Metal Tools
Sharp Industries 220V 9" x 49” Digital Variable Speed 2 Axes CNC Vertical Knee Mill LMV-49/DVS/MP-2 G2
  • Table Size: 9” x 49”
  • X, Y, Z Axis Travel: 31”, 11”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 220V, 3 HP
$55,495
As low as $1,098.24/mo
View Details
Jet JTM-949EVS/230 Electronic Variable Speed Vertical Milling Machine 230V 3Ph 691500 at Elite Metal Tools
Jet JTM-949EVS/230 Electronic Variable Speed Vertical Milling Machine 230V 3Ph 691500
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $21,991.39
$16,875
As low as $333.95/mo
View Details
OZ Machine 400V 1.5HP Copy Router Machine with Triple Grip Slot Drilling GALAXY - II at Elite Metal Tools
OZ Machine 400V 1.5HP Copy Router Machine with Triple Grip Slot Drilling GALAXY - II
  • KW: 1.1
  • RPM: 3000
  • Amp: 6.5 A
  • Air consumption: 5 L / min
$7,250
As low as $235.62/mo
View Details
Jet JMD-18PFN Mill/Drill With Power Downfeed 115/230V 1Ph 350020 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With Power Downfeed 115/230V 1Ph 350020
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $5,651.39
$4,465
As low as $145.11/mo
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed 351041 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed 351041
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $7,899.69
$6,275
As low as $203.93/mo
View Details
Acra Variable Speed Vertical Mill LCTM2 at Elite Metal Tools
Acra Variable Speed Vertical Mill LCTM2
  • Table Size: 10” x 50”
  • X, Y, Z Axis Travel: 39” X 16” X 5”
  • Motor: 5 H.P.
  • Spindle RPM: 60 ~ 4,500 RPM
$20,753.70
As low as $410.71/mo
View Details
OZ Machine 220V 5.5HP Automatic End Milling Machine - Pneumatic Blade Replacement (Blade is not included) POLAR - IV at Elite Metal Tools
OZ Machine 220V 5.5HP Automatic End Milling Machine - Pneumatic Blade Replacement (Blade is not included) POLAR - IV
  • KW: 4
  • RPM: 3000
  • Hz: 60
  • Amp: 11 A
$6,250
As low as $203.12/mo
View Details
Knuth 4.3HP 16"x31" FPK 4.3 Toolroom Milling Machine 302340 at Elite Metal Tools
Knuth 4.3HP 16"x31" FPK 4.3 Toolroom Milling Machine 302340
  • Number of T-slots: 6 positions
  • Table dimensions: 16” x 31”
  • Table load capacity (max.): 440 lbs.
  • T-slot (width x spacing): 0.55” x 2.48”
$68,107.50
As low as $1,347.84/mo
View Details
Jet JTM-1050 Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690930 at Elite Metal Tools
Jet JTM-1050 Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690930
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $62,657.09
$48,495
As low as $959.71/mo
View Details
Sharp Industries 220V 54” Variable Speed 2 Axes CNC Vertical Knee Mill with NT-40 Spindle TMV-I/MP-2 G2 at Elite Metal Tools
Sharp Industries 220V 54” Variable Speed 2 Axes CNC Vertical Knee Mill with NT-40 Spindle TMV-I/MP-2 G2
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 220V, 5 HP
$62,695
As low as $1,240.73/mo
View Details
Sharp Industries 440V 54” Variable Speed 2 Axes CNC Vertical Knee Mill with NT-40 Spindle TMV-I/MP-2 G2 at Elite Metal Tools
Sharp Industries 440V 54” Variable Speed 2 Axes CNC Vertical Knee Mill with NT-40 Spindle TMV-I/MP-2 G2
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 440V, 5 HP
$62,695
As low as $1,240.73/mo
View Details
Palmgren 13” Variable Speed Gear Head Milling Machine 9680159 at Elite Metal Tools
Palmgren 13” Variable Speed Gear Head Milling Machine 9680159
  • Swing: 13-1/2"
  • Motor: 5/8HP - 240V -1PH - 10Amp - 60Hz
  • Table Work Surface: 15-3/4" x 4-3/4"
  • Spindle to Table: 8-1/4"
MSRP: $3,129
$2,761.18
As low as $89.73/mo
View Details
Knuth 7.4HP 18"x33" FPK 6.3 Toolroom Milling Machine 302341 at Elite Metal Tools
Knuth 7.4HP 18"x33" FPK 6.3 Toolroom Milling Machine 302341
  • Number of T-slots: 7 positions
  • Table dimensions: 18” x 33”
  • Table load capacity (max.): 660 lbs.
  • T-slot (width x spacing): 0.55” x 2.48”
$73,112.78
As low as $1,446.90/mo
View Details
OZ Machine 400V 1.5HP Copy Router Machine with Triple Grip Slot Drilling and Water Discharge GALAXY - III at Elite Metal Tools
OZ Machine 400V 1.5HP Copy Router Machine with Triple Grip Slot Drilling and Water Discharge GALAXY - III
  • KW: 1.1
  • RPM: 3000
  • Hz: 50 / 60
  • Amp: 6.5 A
$8,400
As low as $273/mo
View Details
Jet JTM-1254VS Variable Speed Vertical Mill Machine 230/460V, 3Ph 690025 at Elite Metal Tools
Jet JTM-1254VS Variable Speed Vertical Mill Machine 230/460V, 3Ph 690025
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Certified Meehanite® castings
  • Dual locks on all moveable surfaces
  • Precision bored and honed milling head
MSRP: $26,229.99
$20,359
As low as $402.90/mo
View Details
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO & X-Axis Powerfeed 351157 at Elite Metal Tools
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO & X-Axis Powerfeed 351157
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $16,585.69
$12,795
As low as $415.83/mo
View Details
Jet JVM-836-1 Mill With X-Axis Powerfeed 690156 at Elite Metal Tools
Jet JVM-836-1 Mill With X-Axis Powerfeed 690156
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $14,619.99
$11,229
As low as $364.94/mo
View Details
Jet Mill/Drill With ACU-RITE 203 DRO | JMD-15 350116 at Elite Metal Tools
Jet Mill/Drill With ACU-RITE 203 DRO | JMD-15 350116
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read external depth gauge
MSRP: $7,039.69
$5,475
As low as $177.93/mo
View Details