Machine

  • Layout
Sharp Industries 220V 49” Digital Variable Speed Vertical Knee Mill LMV-49-DVS at Elite Metal Tools
Sharp Industries 220V 49” Digital Variable Speed Vertical Knee Mill LMV-49-DVS
  • Table Size: 9” x 49”
  • X, Y, Z Axis Travel: 36.6” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$20,924.25
As low as $414.09/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Air Powered Draw Bar 690680 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Air Powered Draw Bar 690680
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $40,272.53
$31,436
As low as $622.11/mo
View Details
Birmingham Vertical Milling Machine 9" x 49" Variable Speed BPV-3949 at Elite Metal Tools
Birmingham Vertical Milling Machine 9" x 49" Variable Speed BPV-3949
  • Certified Meehanite Castings, Turcite B on Female Surfaces, 9″ x 49″ Table
  • Easy to Read Dials, Dove Tail Ways, One Shot Lubrication,
  • Hardened and Ground Table, Hardened and Ground X and Y Slideways
  • Dual Table Locks, Dual Knee Locks
MSRP: $17,000
$13,495
As low as $438.58/mo
View Details
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $10,000.53
$7,812
As low as $253.89/mo
View Details
Birmingham Vertical Milling Machine 9" x 49" BPS-1649 at Elite Metal Tools
Birmingham Vertical Milling Machine 9" x 49" BPS-1649
  • Certified Meehanite Castings, Turcite B on Female Surfaces, 9″ x 49″ Table
  • Easy to Read Dials, Dove Tail Ways, One Shot Lubrication,
  • Hardened and Ground Table, Hardened and Ground X and Y Slideways
  • Dual Table Locks, Dual Knee Locks
MSRP: $15,999
$12,495
As low as $406.08/mo
View Details
Baileigh Vertical Milling Machine VM-942-1 at Elite Metal Tools
Baileigh Vertical Milling Machine VM-942-1
  • 3-Axis DRO - Standard
  • NST 40 Spindle Taper
  • Power Feed On X, Y, Z
  • Turcity B® Coated Ways And Guides For Extreme Durability
MSRP: $30,271.99
$23,795
As low as $470.90/mo
View Details
Jet JTM-4VS Variable Speed Vertical Milling Machine 230/460V 3Ph 690182 at Elite Metal Tools
Jet JTM-4VS Variable Speed Vertical Milling Machine 230/460V 3Ph 690182
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $17,973.99
$14,629
As low as $475.44/mo
View Details
Baileigh Vertical Milling Machine - VM-949-3 at Elite Metal Tools
Baileigh Vertical Milling Machine - VM-949-3
  • Mitutoyo 2 Axis DRO - Standard
  • Yaskawa Inverter Head
  • Pneumatic Power Draw Bar
  • Power Feed On X, Y, X Axis
MSRP: $32,704.53
$26,495
As low as $524.33/mo
View Details
Jet JTM-4VS Mill With X-Axis Powerfeed 690183 at Elite Metal Tools
Jet JTM-4VS Mill With X-Axis Powerfeed 690183
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,514.66
$15,840
As low as $313.47/mo
View Details
Jet JVM-836-1 Step Pulley Milling Machine 115V 1Ph 690036 at Elite Metal Tools
Jet JVM-836-1 Step Pulley Milling Machine 115V 1Ph 690036
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $14,189.99
$10,975
As low as $356.68/mo
View Details
Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph 690038 at Elite Metal Tools
Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph 690038
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $14,189.99
$10,975
As low as $356.68/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690430 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690430
  • Adjustable gibs throughout
  • Heavy-duty spindle brake
  • Heavy-duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
MSRP: $31,488.26
$25,080
As low as $496.33/mo
View Details
Sharp Industries 220V 54” Variable Speed Large Vertical Knee Mill TMV at Elite Metal Tools
Sharp Industries 220V 54” Variable Speed Large Vertical Knee Mill TMV
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 39” x 16.3” x 5”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$24,949.25
As low as $493.74/mo
View Details
Sharp Industries 440V 54” Variable Speed Large Vertical Knee Mill TMV at Elite Metal Tools
Sharp Industries 440V 54” Variable Speed Large Vertical Knee Mill TMV
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 39” x 16.3” x 5”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 440V, 3HP
$24,949.25
As low as $493.74/mo
View Details
Jet JMD-18 Mill/Drill With X-Axis Table Powerfeed 350119 at Elite Metal Tools
Jet JMD-18 Mill/Drill With X-Axis Table Powerfeed 350119
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $7,122.05
$5,575
As low as $181.18/mo
View Details
Baileigh Variable Speed Vertical Mill VM-1054E-VS at Elite Metal Tools
Baileigh Variable Speed Vertical Mill VM-1054E-VS
  • Table Size 54" x 10"
  • Spindle Center To Column Min Max 7.87" – 26.77"
  • Spindle Diameter 3.93"
  • Spindle Feed Per Rev .0015"/.003"/.006"
MSRP: $27,298.80
$22,219
As low as $439.71/mo
View Details
Sharp Industries 220V 50” Variable Speed 3 Axes CNC Vertical Knee Mill with NT-40 Spindle TMV-I/MP-3 G2 at Elite Metal Tools
Sharp Industries 220V 50” Variable Speed 3 Axes CNC Vertical Knee Mill with NT-40 Spindle TMV-I/MP-3 G2
  • Table Size: 10” x 50”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 220V, 5 HP
$83,061.90
As low as $1,643.79/mo
View Details
Sharp Industries 440V 50” Variable Speed 3 Axes CNC Vertical Knee Mill with NT-40 Spindle TMV-I/MP-3 G2 at Elite Metal Tools
Sharp Industries 440V 50” Variable Speed 3 Axes CNC Vertical Knee Mill with NT-40 Spindle TMV-I/MP-3 G2
  • Table Size: 10” x 50”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 440V, 5 HP
$83,061.90
As low as $1,643.79/mo
View Details
Jet JMD-18 Mill/Drill With NEWALL DP700 DRO 350126 at Elite Metal Tools
Jet JMD-18 Mill/Drill With NEWALL DP700 DRO 350126
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $8,892.39
$7,005
As low as $227.66/mo
View Details
Sharp Industries 220V 54” Variable Speed Large Vertical Knee Mill with NT-40 Spindle TMV-1 at Elite Metal Tools
Sharp Industries 220V 54” Variable Speed Large Vertical Knee Mill with NT-40 Spindle TMV-1
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 39” x 16.3” x 5”
  • Spindle Nose Taper: NT-40
  • Spindle Motor: 220V, 5HP
$33,458.67
As low as $662.14/mo
View Details
Sharp Industries 440V 54” Variable Speed Large Vertical Knee Mill with NT-40 Spindle TMV-1 at Elite Metal Tools
Sharp Industries 440V 54” Variable Speed Large Vertical Knee Mill with NT-40 Spindle TMV-1
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 39” x 16.3” x 5”
  • Spindle Nose Taper: NT-40
  • Spindle Motor: 440V, 5HP
$33,458.67
As low as $662.14/mo
View Details
Sharp Industries 220V 9” x 50” Variable Speed 3 Axes CNC Vertical Knee Mill LMV-50/MP-3 G2 at Elite Metal Tools
Sharp Industries 220V 9” x 50” Variable Speed 3 Axes CNC Vertical Knee Mill LMV-50/MP-3 G2
  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 32”, 11”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 220V, 3 HP
$74,835.81
As low as $1,481.00/mo
View Details
Sharp Industries 440V 9” x 50” Variable Speed 3 Axes CNC Vertical Knee Mill LMV-50/MP-3 G2 at Elite Metal Tools
Sharp Industries 440V 9” x 50” Variable Speed 3 Axes CNC Vertical Knee Mill LMV-50/MP-3 G2
  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 32”, 11”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 440V, 3 HP
$74,835.81
As low as $1,481.00/mo
View Details
Acra Step Pulley Milling Machine AM2S at Elite Metal Tools
Acra Step Pulley Milling Machine AM2S
  • Voltage: 220V Or 440V
  • Cross Travel (Y Axis): 12 1/2"
  • Vertical Knee Travel (Z Axis): 16"
  • Spindle Motor: R-8 or #30 Taper
$12,204.50
As low as $396.64/mo
View Details