Machine

  • Table Size: 10” x 54”
  • Table Load Capacity: 750 lbs.
  • X Axis Travel: 36-1/2”
  • X Travel with Power Feed: 33-1/2”
$18,850
As low as $373.04/mo

  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $4,074.29
$3,339
As low as $108.51/mo

  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 30” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$12,795
As low as $415.83/mo

  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 30” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 440V, 3HP
$12,795
As low as $415.83/mo

  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read external depth gauge
MSRP: $3,192.86
$2,599
As low as $84.46/mo

  • Quill Travel: 5"
  • Over Ram Travel: 12 1/4"
  • Cross Travel (Y Axis): 12 1/2"
  • Spindle RPM: 65~4,200 RPM
$12,820.50
As low as $416.66/mo

  • Mitutoyo 2 Axis DRO - Standard
  • Yaskawa Inverter Head
  • Pneumatic Inverter Head
  • Power Feed On X, Y, Z Axis
MSRP: $37,041.83
$30,499
As low as $603.57/mo

  • Spindle Speeds 8
  • Spindle Travel 5"
  • Spindle Speed Range 80, 140, 230, 350, 650, 1100, 1800, 2760 RPM
  • T-Slot Width 5/8"
MSRP: $14,741.43
$11,999
As low as $389.96/mo

  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $15,164.29
$12,299
As low as $399.71/mo

  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 37” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$13,195
As low as $428.83/mo

  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 37” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 440V, 3HP
$13,195
As low as $428.83/mo

  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $6,041.43
$4,969
As low as $161.49/mo

  • Cross Travel (Y Axis): 15 1/2"
  • Spindle Speed: Inf. Vari.
  • Quill Diameter: 4"
  • Voltage: 220V 1PH/3PH
$25,198.80
As low as $498.68/mo

  • Table Size: 9” x 49”
  • Table Load Capacity: 650 lbs.
  • X Axis Travel: 35-1/2”
  • X Travel with Power Feed: 31-1/2”
$15,850
As low as $313.67/mo

  • KW: 2.2
  • RPM: 3000
  • Hz: 50 / 60
  • Amp: 4.8 A
$7,000
As low as $227.50/mo

  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $52,827.34
$42,999
As low as $850.95/mo

  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 220V, 3 HP
$38,420
As low as $760.33/mo

  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 440V, 3 HP
$38,420
As low as $760.33/mo

  • Certified Meehanite Castings, Turcite B on Female Surfaces, 9″ x 49″ Table
  • Easy to Read Dials, Dove Tail Ways, One Shot Lubrication,
  • Hardened and Ground Table, Hardened and Ground X and Y Slideways
  • Dual Table Locks, Dual Knee Locks
MSRP: $14,000
$10,095
As low as $328.08/mo

  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 220V, 3 HP
$45,735
As low as $905.09/mo

  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 440V, 3 HP
$45,735
As low as $905.09/mo

  • KW: 1.1
  • RPM: 3000
  • Hz: 60
  • Amp: 6.5
$6,000
As low as $195/mo

  • Certified Meehanite Castings, Turcite B on Female Surfaces, 9″ x 49″ Table
  • Easy to Read Dials, Dove Tail Ways, One Shot Lubrication,
  • Hardened and Ground Table, Hardened and Ground X and Y Slideways
  • Dual Table Locks, Dual Knee Locks
MSRP: $12,600
$9,795
As low as $318.33/mo

  • Spindle Speeds 60 - 4,200RPM Infinitely Variable
  • Distance from Spindle to Table 18.5"
  • Spindle Travel 4.9"
  • Spindle Speed Range 60 to 4200 RPM
MSRP: $16,952.86
$13,799
As low as $448.46/mo