Machine

  • Layout
GMC Machinery 3HP 10” x 54” Vertical Mill GMM-1054VPKG at Elite Metal Tools
GMC Machinery 3HP 10” x 54” Vertical Mill GMM-1054VPKG
  • Table Size: 10” x 54”
  • Table Load Capacity: 750 lbs.
  • X Axis Travel: 36-1/2”
  • X Travel with Power Feed: 33-1/2”
$13,850.00
As low as $450/mo
View Details
Jet JMD-18 Mill/Drill With R-8 Taper 115V1Ph 350018 at Elite Metal Tools
Jet JMD-18 Mill/Drill With R-8 Taper 115V1Ph 350018
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
$4,074.29
$3,339.00
As low as $108/mo
View Details
Jet JMD-15 Mill/Drill With R-8 Taper 115V1Ph 350017 at Elite Metal Tools
Jet JMD-15 Mill/Drill With R-8 Taper 115V1Ph 350017
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read external depth gauge
$3,192.86
$2,599.00
As low as $84/mo
View Details
Baileigh Vertical Knee Mill VM-942E-1 at Elite Metal Tools
Baileigh Vertical Knee Mill VM-942E-1
  • Spindle Speeds 8
  • Spindle Travel 5"
  • Spindle Speed Range 80, 140, 230, 350, 650, 1100, 1800, 2760 RPM
  • T-Slot Width 5/8"
$14,741.43
$11,999.00
As low as $389/mo
View Details
Jet JMD-40GH Geared Head Mill/Drill 351040 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill 351040
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
$6,041.43
$4,969.00
As low as $161/mo
View Details
Acra Variable Speed Milling Machine AM2V at Elite Metal Tools
Acra Variable Speed Milling Machine AM2V
  • Quill Travel: 5"
  • Over Ram Travel: 12 1/4"
  • Cross Travel (Y Axis): 12 1/2"
  • Spindle RPM: 65~4,200 RPM
$11,554.00
As low as $375/mo
View Details
Baileigh Vertical Mill VM-1054-3 at Elite Metal Tools
Baileigh Vertical Mill VM-1054-3
  • Mitutoyo 2 Axis DRO - Standard
  • Yaskawa Inverter Head
  • Pneumatic Inverter Head
  • Power Feed On X, Y, Z Axis
$37,041.83
$30,499.00
As low as $603/mo
View Details
Jet JTM-4VS-1 Variable Speed Vertical Milling Machine 115/230V 1Ph 690180 at Elite Metal Tools
Jet JTM-4VS-1 Variable Speed Vertical Milling Machine 115/230V 1Ph 690180
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
$15,164.29
$12,299.00
As low as $399/mo
View Details
Jet JMD-18 Mill/Drill With NEWALL DP700 DRO 350126 at Elite Metal Tools
Jet JMD-18 Mill/Drill With NEWALL DP700 DRO 350126
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
$7,582.03
$6,179.00
As low as $200/mo
View Details
Sharp Industries 220V 42” Variable Speed Vertical Knee Mill LMV-42 at Elite Metal Tools
Sharp Industries 220V 42” Variable Speed Vertical Knee Mill LMV-42
  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 30” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$12,795.00
As low as $415/mo
View Details
Sharp Industries 440V 42” Variable Speed Vertical Knee Mill LMV-42 at Elite Metal Tools
Sharp Industries 440V 42” Variable Speed Vertical Knee Mill LMV-42
  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 30” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 440V, 3HP
$12,795.00
As low as $415/mo
View Details
Baileigh Vertical Mill VM-949E-VS at Elite Metal Tools
Baileigh Vertical Mill VM-949E-VS
  • Spindle Speeds 60 - 4,200RPM Infinitely Variable
  • Distance from Spindle to Table 18.5"
  • Spindle Travel 4.9"
  • Spindle Speed Range 60 to 4200 RPM
$16,952.86
$13,799.00
As low as $448/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Air Powered Draw Bar 690680 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Air Powered Draw Bar 690680
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
$34,425.67
$27,799.00
As low as $550/mo
View Details
Baileigh Vertical Milling Machine VM-942-1 at Elite Metal Tools
Baileigh Vertical Milling Machine VM-942-1
  • 3-Axis DRO - Standard
  • NST 40 Spindle Taper
  • Power Feed On X, Y, Z
  • Turcity B® Coated Ways And Guides For Extreme Durability
$26,174.95
$21,299.00
As low as $421/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690948 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690948
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
$52,827.34
$42,999.00
As low as $850/mo
View Details
GMC Machinery 3HP 9" x 49" Vertical Mill GMM-949VPKG at Elite Metal Tools
GMC Machinery 3HP 9" x 49" Vertical Mill GMM-949VPKG
  • Table Size: 9” x 49”
  • Table Load Capacity: 650 lbs.
  • X Axis Travel: 35-1/2”
  • X Travel with Power Feed: 31-1/2”
$13,350.00
As low as $433/mo
View Details
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
$8,611.20
$6,949.00
As low as $225/mo
View Details
Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph 690038 at Elite Metal Tools
Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph 690038
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
$11,514.29
$9,299.00
As low as $302/mo
View Details
Baileigh Vertical Milling Machine - VM-949-3 at Elite Metal Tools
Baileigh Vertical Milling Machine - VM-949-3
  • Mitutoyo 2 Axis DRO - Standard
  • Yaskawa Inverter Head
  • Pneumatic Power Draw Bar
  • Power Feed On X, Y, X Axis
$27,830.00
$22,919.00
As low as $453/mo
View Details
Birmingham Vertical Milling Machine 9" x 49" Variable Speed BPV-3949 at Elite Metal Tools
Birmingham Vertical Milling Machine 9" x 49" Variable Speed BPV-3949
  • Certified Meehanite Castings, Turcite B on Female Surfaces, 9″ x 49″ Table
  • Easy to Read Dials, Dove Tail Ways, One Shot Lubrication,
  • Hardened and Ground Table, Hardened and Ground X and Y Slideways
  • Dual Table Locks, Dual Knee Locks
$11,900.00
$8,895.00
As low as $289/mo
View Details
Acra Precision Milling Machine AM5AC at Elite Metal Tools
Acra Precision Milling Machine AM5AC
  • Cross Travel (Y Axis): 15 1/2"
  • Spindle Speed: Inf. Vari.
  • Quill Diameter: 4"
  • Voltage: 220V 1PH/3PH
$22,908.00
As low as $453/mo
View Details
Baileigh Vertical Mill VM-1258-3 at Elite Metal Tools
Baileigh Vertical Mill VM-1258-3
  • Mitutoyo 2 axis DRO - standard 
  • Power feed on X, Y, and Z axis 
  • Standard table and knee locks 
  • Way covers and chip tray 
$52,305.71
$43,089.00
As low as $852/mo
View Details
Baileigh Milling Machine VM-949-1 at Elite Metal Tools
Baileigh Milling Machine VM-949-1
  • Mitutoyo 2 axis DRO - standard 
  • Power feed on X, Y, and Z axis 
  • Standard table and knee locks
  • Way covers and chip tray included 
$29,596.91
$24,379.00
As low as $482/mo
View Details
Jet JTM-4VS Mill With X-Axis Powerfeed 690183 at Elite Metal Tools
Jet JTM-4VS Mill With X-Axis Powerfeed 690183
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
$17,717.05
$14,355.99
As low as $466/mo
View Details