Machine

  • Table Size: 10” x 54”
  • Table Load Capacity: 750 lbs.
  • X Axis Travel: 36-1/2”
  • X Travel with Power Feed: 33-1/2”
$15,850
As low as $313.67/mo
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $4,324.59
$3,519.99
As low as $114.39/mo
  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 30” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$13,499
As low as $438.71/mo
  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 30” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 440V, 3HP
$13,499
As low as $438.71/mo
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read external depth gauge
MSRP: $3,378.59
$2,749.99
As low as $89.37/mo
  • Mitutoyo 2 Axis DRO - Standard
  • Yaskawa Inverter Head
  • Pneumatic Inverter Head
  • Power Feed On X, Y, Z Axis
MSRP: $39,314.29
$30,999
As low as $613.47/mo
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $16,339.99
$12,595
As low as $409.33/mo
  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 37” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$13,899
As low as $451.71/mo
  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 37” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 440V, 3HP
$13,899
As low as $451.71/mo
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $6,413.09
$5,219.99
As low as $169.64/mo
  • Table Size: 9” x 49”
  • Table Load Capacity: 650 lbs.
  • X Axis Travel: 35-1/2”
  • X Travel with Power Feed: 31-1/2”
$14,850
As low as $482.62/mo
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $56,882.79
$44,395
As low as $878.57/mo
  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 220V, 3 HP
$44,800
As low as $886.59/mo
  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 440V, 3 HP
$44,800
As low as $886.59/mo
  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 220V, 3 HP
$50,799
As low as $1,005.31/mo
  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 440V, 3 HP
$50,799
As low as $1,005.31/mo
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $8,083.99
$6,395
As low as $207.83/mo
  • Table Size: 9” x 49”
  • X, Y, Z Axis Travel: 36.6” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$15,869
As low as $314.04/mo
  • Mitutoyo 2 Axis DRO - Standard
  • Yaskawa Inverter Head
  • Pneumatic Power Draw Bar
  • Power Feed On X, Y, X Axis
MSRP: $29,731.39
$23,195
As low as $459.02/mo
  • Table Size: 12” x 58”
  • X, Y, Z Axis Travel: 40” x 16” x 5”
  • Spindle Nose Taper: NT-40
  • Spindle Motor: 220V, 5HP
$43,300
As low as $856.90/mo
  • 3-Axis DRO - Standard
  • NST 40 Spindle Taper
  • Power Feed On X, Y, Z
  • Turcity B® Coated Ways And Guides For Extreme Durability
MSRP: $27,519.99
$21,595
As low as $427.36/mo
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $9,091.39
$7,115
As low as $231.23/mo
  • Mitutoyo 2 axis DRO - standard 
  • Power feed on X, Y, and Z axis 
  • Standard table and knee locks 
  • Way covers and chip tray 
MSRP: $55,285.69
$44,999.99
As low as $890.54/mo
  • Mitutoyo 2 axis DRO - standard 
  • Power feed on X, Y, and Z axis 
  • Standard table and knee locks
  • Way covers and chip tray included 
MSRP: $31,574.29
$25,295
As low as $500.58/mo