Machine

  • Table Size: 10” x 54”
  • Table Load Capacity: 750 lbs.
  • X Axis Travel: 36-1/2”
  • X Travel with Power Feed: 33-1/2”
$18,850
As low as $373.04/mo

  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $4,074.29
$3,339
As low as $108.51/mo

  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 30” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$12,795
As low as $415.83/mo

  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 30” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 440V, 3HP
$12,795
As low as $415.83/mo

  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read external depth gauge
MSRP: $3,192.86
$2,599
As low as $84.46/mo

  • Mitutoyo 2 Axis DRO - Standard
  • Yaskawa Inverter Head
  • Pneumatic Inverter Head
  • Power Feed On X, Y, Z Axis
MSRP: $37,041.83
$30,499
As low as $603.57/mo

  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $15,164.29
$12,299
As low as $399.71/mo

  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 37” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$13,195
As low as $428.83/mo

  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 37” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 440V, 3HP
$13,195
As low as $428.83/mo

  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $6,041.43
$4,969
As low as $161.49/mo

  • Table Size: 9” x 49”
  • Table Load Capacity: 650 lbs.
  • X Axis Travel: 35-1/2”
  • X Travel with Power Feed: 31-1/2”
$15,850
As low as $313.67/mo

  • KW: 2.2
  • RPM: 3000
  • Hz: 50 / 60
  • Amp: 4.8 A
$7,000
As low as $227.50/mo

  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $52,827.34
$42,999
As low as $850.95/mo

  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 220V, 3 HP
$38,420
As low as $760.33/mo

  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 440V, 3 HP
$38,420
As low as $760.33/mo

  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 220V, 3 HP
$45,735
As low as $905.09/mo

  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 440V, 3 HP
$45,735
As low as $905.09/mo

  • KW: 1.1
  • RPM: 3000
  • Hz: 60
  • Amp: 6.5
$6,000
As low as $195/mo

  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $7,582.03
$6,179
As low as $200.81/mo

  • Mitutoyo 2 Axis DRO - Standard
  • Yaskawa Inverter Head
  • Pneumatic Power Draw Bar
  • Power Feed On X, Y, X Axis
MSRP: $27,830
$22,919
As low as $453.56/mo

  • Table Size: 9” x 49”
  • X, Y, Z Axis Travel: 36.6” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$15,045
As low as $297.74/mo

  • Table Size: 12” x 58”
  • X, Y, Z Axis Travel: 40” x 16” x 5”
  • Spindle Nose Taper: NT-40
  • Spindle Motor: 220V, 5HP
$40,990
As low as $811.19/mo

  • 3-Axis DRO - Standard
  • NST 40 Spindle Taper
  • Power Feed On X, Y, Z
  • Turcity B® Coated Ways And Guides For Extreme Durability
MSRP: $26,174.95
$21,299
As low as $421.50/mo

  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $8,611.20
$6,949
As low as $225.84/mo