Machine

  • Table Size 54" x 10"
  • Spindle Center To Column Min Max 7.87" – 26.77"
  • Spindle Diameter 3.93"
  • Spindle Feed Per Rev .0015"/.003"/.006"
MSRP: $24,817.09
$20,199.99
As low as $399.75/mo
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $6,474.59
$5,045
As low as $163.96/mo
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 39” x 16.3” x 5”
  • Spindle Nose Taper: NT-40
  • Spindle Motor: 220V, 5HP
$25,250
As low as $499.69/mo
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 39” x 16.3” x 5”
  • Spindle Nose Taper: NT-40
  • Spindle Motor: 440V, 5HP
$25,250
As low as $499.69/mo
  • Table set up area: 39” x 9”
  • Table load capacity (max.): 330 lbs.
  • Motor rating horizontal spindle: 3 Hp
  • Motor rating vertical spindle: 2 Hp
$18,170.28
As low as $359.58/mo
  • Adjustable gibs throughout
  • Heavy-duty spindle brake
  • Heavy-duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
MSRP: $28,625.69
$22,095
As low as $437.26/mo
  • Table Size: 29.5” x 106.3”
  • X & Y Axis Travel: 78.74” x 31.5”
  • Spindle Taper: NST #50
  • Spindle Motor: 220V, 17.5 HP Vertical, 7.5 HP Horizontal
$200,660
As low as $3,971.06/mo
  • Table Size: 19.68” x 86.62”
  • X & Y Axis Travel: 59” x 23.62”
  • Spindle Taper: NST #50
  • Spindle Motor: 220V, 17.5 HP Vert., 7.5 HP Horiz.
$138,615
As low as $2,743.19/mo
  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 32”, 11”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 220V, 3 HP
$46,650
As low as $923.20/mo
  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 32”, 11”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 440V, 3 HP
$46,650
As low as $923.20/mo
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • CNC electronic variable speed vertical milling machine package for JTM-1050EVS
MSRP: $57,251.39
$44,610
As low as $882.83/mo
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read external depth gauge
MSRP: $6,081.39
$4,775
As low as $155.18/mo
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $49,511.39
$39,095
As low as $773.69/mo
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $8,292.79
$6,555
As low as $213.03/mo
  • Drilling capacity: 1.18”
  • Table load capacity: 2,200 lbs.
  • Number of T-slots: 6 positions
  • T-slots, width: 0.7”
MSRP: $166,375
$162,207.22
As low as $3,210.08/mo
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $25,922.79
$20,175
As low as $399.26/mo
  • Table set up area: 44” x 10”
  • Number of T-slots: 3 positions
  • Table load capacity (max.): 550 lbs.
  • X-axis travel: 24”
$26,548.89
As low as $525.40/mo
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $23,342.79
$18,285
As low as $361.86/mo
  • Table Size: 9” x 49”
  • X, Y, Z Axis Travel: 31”, 11”, 5”
  • Spindle: 60 - 4500 rpm Digital Variable Speed
  • Motor: 220V, 3 HP
$53,499
As low as $1,058.74/mo
  • Table set up area: 49” x 9”
  • Number of T-slots: 3 positions
  • Travel X-axis: 29.9”
  • 5 Year Parts Warranty 
$20,391.39
As low as $403.54/mo
  • Table Size: 14.93” x 67”
  • X & Y Axis Travel: 39.37” x 14.93”
  • Spindle Taper: NST #50
  • Spindle Motor: 220V, 5HP
$71,286
As low as $1,410.74/mo
  • Spindle Nose-to-Table Surface Distance: 6”-37”
  • Table Dimensions: 79” x 47”
  • Table Load Capacity (max.): 8,800 lbs.
  • Travel X-Axis: 82.7”
$284,495
As low as $5,630.15/mo
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $16,339.99
$13,299.99
As low as $432.24/mo