Machine

  • Layout
Jet JTM-1254RVS with X & Y Powerfeeds & Air Power Drawbar 698087 at Elite Metal Tools
Jet JTM-1254RVS with X & Y Powerfeeds & Air Power Drawbar 698087
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $29,238.57
$23,799
As low as $470.98/mo
View Details
Jet JVM-836-3 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690146 at Elite Metal Tools
Jet JVM-836-3 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690146
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $16,704.29
$13,819
As low as $449.11/mo
View Details
Jet JTM-949EVS Mill With X, Y and Z-Axis Powerfeeds 690504 at Elite Metal Tools
Jet JTM-949EVS Mill With X, Y and Z-Axis Powerfeeds 690504
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $26,069.74
$21,010.99
As low as $415.80/mo
View Details
Jet JTM-4VS-1 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds and 6" Riser Block 692306 at Elite Metal Tools
Jet JTM-4VS-1 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds and 6" Riser Block 692306
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $23,632.86
$18,999
As low as $375.99/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite MilPwr G2 CNC Controller 690676 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite MilPwr G2 CNC Controller 690676
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • CNC electronic variable speed vertical milling machine package for JTM-1050EVS
MSRP: $62,324.20
$50,729
As low as $1,003.92/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed and Power Draw Bar 690251 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed and Power Draw Bar 690251
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $23,687.14
$19,199
As low as $379.94/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds 698057 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds 698057
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $31,572.86
$25,699
As low as $508.58/mo
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690094 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690094
  • Adjustable gibs throughout
  • Heavy-duty spindle brake
  • Heavy-duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
MSRP: $26,995.71
$21,799
As low as $431.40/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Quill) With X & Y-Axis Powerfeeds 692192 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Quill) With X & Y-Axis Powerfeeds 692192
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $19,634.29
$15,859
As low as $313.84/mo
View Details
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO 350128 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO 350128
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $8,634.29
$7,099
As low as $230.71/mo
View Details
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP500 2-Axis DRO 351160 at Elite Metal Tools
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP500 2-Axis DRO 351160
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $11,282.86
$9,229
As low as $299.94/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690633 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690633
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $33,415.19
$26,899
As low as $532.33/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690625 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690625
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $30,467.14
$24,599
As low as $486.81/mo
View Details
Jet JTM-1050VS2 Mill With X and Y-Axis Powerfeeds 690150 at Elite Metal Tools
Jet JTM-1050VS2 Mill With X and Y-Axis Powerfeeds 690150
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $23,381.43
$18,949
As low as $375.00/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690630 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690630
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $28,991.13
$23,399
As low as $463.06/mo
View Details
Jet JVM-836-1 Mill With Newall DP700 DRO With X and Y-Axis Powerfeed 691175 at Elite Metal Tools
Jet JVM-836-1 Mill With Newall DP700 DRO With X and Y-Axis Powerfeed 691175
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $17,340
$14,259
As low as $463.41/mo
View Details
Jet JTM-1254RVS with Newall DP700 DRO X Powerfeed and Air Power Drawbar 698127 at Elite Metal Tools
Jet JTM-1254RVS with Newall DP700 DRO X Powerfeed and Air Power Drawbar 698127
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $31,450
$25,599
As low as $506.60/mo
View Details
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds 690522 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds 690522
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $28,290.42
$22,729
As low as $449.80/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds and Power Draw Bar 690151 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds and Power Draw Bar 690151
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $27,959.66
$22,571.99
As low as $446.69/mo
View Details
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 691411 at Elite Metal Tools
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 691411
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,832.86
$17,369
As low as $343.73/mo
View Details
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and 8" Riser Block 690216 at Elite Metal Tools
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and 8" Riser Block 690216
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square knee ways and cross ways
  • Heavy-duty spindle brake
MSRP: $26,474.29
$21,299
As low as $421.50/mo
View Details
Jet JVM-836-3 Mill With DP700-DRO With X-Axis Powerfeed 691180 at Elite Metal Tools
Jet JVM-836-3 Mill With DP700-DRO With X-Axis Powerfeed 691180
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $16,147.14
$13,269
As low as $431.24/mo
View Details
Jet JTM-1254RVS with X Powerfeed 698084 at Elite Metal Tools
Jet JTM-1254RVS with X Powerfeed 698084
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $25,552.86
$20,799
As low as $411.61/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed 690629 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed 690629
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $33,650.90
$27,179
As low as $537.87/mo
View Details