Machine

  • Table Size: 9” x 49”
  • Table Load Capacity: 650 lbs.
  • X Axis Travel: 35-1/2”
  • X Travel with Power Feed: 31-1/2”
$14,850
As low as $482.62/mo
  • Drilling capacity: 1.97”
  • Table set up area: 43” x 38”
  • Table load capacity: 5,500 lbs.
  • Spindle axis-to-table surface distance: 0” - 35.43”
$245,352.57
As low as $4,855.52/mo
  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 220V, 3 HP
$61,295
As low as $1,213.02/mo
  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 440V, 3 HP
$61,295
As low as $1,213.02/mo
  • Table dimensions: 52” x 14”
  • Table load capacity (max.): 1,100 lbs.
  • Motor rating horizontal spindle: 7.4 Hp
  • Motor rating vertical spindle: 5.4 Hp
$45,695.56
As low as $904.31/mo
  • Main drive motor rating (vertical): 5 Hp
  • Main drive motor rating (horizontal): 4 Hp
  • Table set up area: 54” x 13”
  • Number of T-slots: 3 positions
$40,550
As low as $802.48/mo
  • Table Size: 9” x 49”
  • X, Y, Z Axis Travel: 36.6” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$18,195
As low as $360.07/mo
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $40,272.53
$31,935
As low as $631.99/mo
  • Table Size: 12” x 58”
  • X, Y, Z Axis Travel: 40” x 16” x 5”
  • Spindle Nose Taper: NT-40
  • Spindle Motor: 220V, 5HP
$48,895
As low as $967.63/mo
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $8,892.39
$7,095
As low as $230.58/mo
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $10,000.53
$7,934
As low as $257.85/mo
  • Mitutoyo 2 Axis DRO - Standard
  • Yaskawa Inverter Head
  • Pneumatic Power Draw Bar
  • Power Feed On X, Y, X Axis
MSRP: $32,704.53
$26,495
As low as $524.33/mo
  • Table Size: 29.5” x 106.3”
  • X & Y Axis Travel: 78.74” x 31.5”
  • Spindle Taper: NST #50
  • Spindle Motor: 220V, 17.5 HP
$189,995
As low as $3,760.00/mo
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $14,189.99
$11,154
As low as $362.50/mo
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • CNC electronic variable speed vertical milling machine package for JTM-1050EVS
MSRP: $62,976.53
$49,771
As low as $984.96/mo
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 39” x 16.3” x 5”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$21,695
As low as $429.34/mo
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 39” x 16.3” x 5”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 440V, 3HP
$21,695
As low as $429.34/mo
  • 3-Axis DRO - Standard
  • NST 40 Spindle Taper
  • Power Feed On X, Y, Z
  • Turcity B® Coated Ways And Guides For Extreme Durability
MSRP: $30,271.99
$23,795
As low as $470.90/mo
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,514.66
$16,094
As low as $318.50/mo
  • Adjustable gibs throughout
  • Heavy-duty spindle brake
  • Heavy-duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
MSRP: $31,488.26
$25,478
As low as $504.20/mo
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $7,122.05
$5,628
As low as $182.91/mo
  • Table Size: 29.5” x 106.3”
  • X & Y Axis Travel: 78.74” x 31.5”
  • Spindle Taper: NST #50
  • Spindle Motor: 220V, 17.5 HP Vertical, 7.5 HP Horizontal
$224,995
As low as $4,452.65/mo
  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 32”, 11”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 220V, 3 HP
$64,595
As low as $1,278.33/mo
  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 32”, 11”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 440V, 3 HP
$64,595
As low as $1,278.33/mo