Machine

  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $4,757.05
$3,871
As low as $125.80/mo

  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read external depth gauge
MSRP: $3,716.45
$3,024
As low as $98.28/mo

  • Quill Travel: 5"
  • Over Ram Travel: 12 1/4"
  • Cross Travel (Y Axis): 12 1/2"
  • Spindle RPM: 65~4,200 RPM
$12,820.50
As low as $416.66/mo

  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $17,973.99
$14,075
As low as $457.43/mo

  • Cross Travel (Y Axis): 15 1/2"
  • Spindle Speed: Inf. Vari.
  • Quill Diameter: 4"
  • Voltage: 220V 1PH/3PH
$25,198.80
As low as $498.68/mo

  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $7,054.40
$5,741
As low as $186.58/mo

  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $62,571.07
$49,473
As low as $979.07/mo

  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $40,272.53
$31,935
As low as $631.99/mo

  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $8,892.39
$7,095
As low as $230.58/mo

  • Table Size: 87" X 20"
  • X, Y, Z Axis Travel: 59" X 24" X 27 1/2"
  • Spindle Vertical: #50 Taper
  • Spindle RPM Vertical: 45 ~ 1500
$112,185.70
As low as $2,220.15/mo

  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $10,000.53
$7,934
As low as $257.85/mo

  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $14,189.99
$11,154
As low as $362.50/mo

  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • CNC electronic variable speed vertical milling machine package for JTM-1050EVS
MSRP: $62,976.53
$49,771
As low as $984.96/mo

  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,514.66
$16,094
As low as $318.50/mo

  • Adjustable gibs throughout
  • Heavy-duty spindle brake
  • Heavy-duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
MSRP: $31,488.26
$25,478
As low as $504.20/mo

  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $7,122.05
$5,628
As low as $182.91/mo

  • Voltage: 220V Or 440V
  • Cross Travel (Y Axis): 12 1/2"
  • Vertical Knee Travel (Z Axis): 16"
  • Spindle Motor: R-8 or #30 Taper
$12,204.50
As low as $396.64/mo

  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $14,189.99
$11,154
As low as $362.50/mo

  • Table size: 9" x 50"
  • Spindle Nose: R-8
  • Spindle Speeds: 60 - 4,500 RPM
  • Ram Travel: 12
$13,724.70
As low as $446.05/mo

  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,002.26
$31,735
As low as $628.03/mo

  • Table Size: 10” X 56”
  • X, Y, Z Axis Travel: 36” X 16 ½” X 5” 
  • Vertical/Horizontal Spindle: #40 NST
  • Voltage: 220 / 440V/ 3PH
$41,214.80
As low as $815.64/mo

  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $8,284.20
$6,673
As low as $216.87/mo

  • Table Size: 9” X 42”
  • X, Y, Z Axis Travel: 30” X 12” X 23”
  • Motor: 3 H.P.
  • Spindle Nose: R-8
$13,495
As low as $438.58/mo

  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read external depth gauge
MSRP: $6,689.53
$5,310
As low as $172.57/mo